Broadband microstrip bandpass filters using triple-mode resonator

NCU Institutional Repository > 資訊電機學院 > 電機工程學系 > 期刊論文 > Item 987654321/51919

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/51919

題名:	Broadband microstrip bandpass filters using triple-mode resonator
作者:	Tu,WH
貢獻者:	電機工程學系
關鍵詞:	STEPPED-IMPEDANCE RESONATORS;UPPER-STOPBAND;REJECTION
日期:	2010
上傳時間:	2012-03-28 10:10:25 (UTC+8)
出版者:	國立中央大學
摘要:	A broadband microstrip bandpass filter using a stub-loaded resonator is proposed. The basic block of the proposed filter is a triple-mode resonator that consists of a half-wave resonator and a shunt open-circuited stub. A parameter study of how to control the frequencies of the three modes is presented. Two bandpass filters using the proposed resonator have been designed, fabricated and tested to validate the design concept. Design guidelines and a comparison with previous work are also included. For the first bandpass filter, from 1.75 to 3.25 GHz, the measured return loss is greater than 16 dB and the measured insertion loss is less than 0.9 dB. The maximum group delay variation is 0.6 ns. Furthermore, there are two transmission zeros at 1.3 and 3.8 GHz for a better cut-off response. For the second one, from 1.6 to 3.7 GHz, the measured return loss is greater than 14 dB and the measured insertion loss is less than 1 dB. The maximum group delay variation is 0.6 ns, and there are two transmission zeros at 1.36 and 4.03 GHz.
關聯:	IET MICROWAVES ANTENNAS & PROPAGATION
顯示於類別:	[電機工程學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	262	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing