中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/54255
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78852/78852 (100%)
造访人次 : 38267478      在线人数 : 592
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/54255


    题名: 導電布拉格反射鏡運用於高效率發光二極體之研究;Research of applying conductive Distributed Bragg Reflectors to high-efficiency Light-Emitting Diodes
    作者: 宋永舜;Sung,Yung-shun
    贡献者: 光電科學研究所
    关键词: 布拉格反射鏡;透明導電膜;高效率發光二極體;transparent conductive oxide films;high-efficiency Light-Emitting Diodes;Distributed Bragg Reflectors
    日期: 2012-08-28
    上传时间: 2012-09-11 18:40:53 (UTC+8)
    出版者: 國立中央大學
    摘要: 本實驗研究著重於反射鏡的光學設計,利用高折射率(TNO)與低折射率(AZO)透明導電膜材料堆疊形成具導電性的布拉格反射鏡。分別運用於藍光LED與紅光LED,並實際做成元件量測。透明導電膜的製備都在室溫下進行鍍製並且在真空環境下退火370度。在藍光LED部分,以P-GaN/ITO/(TNO/AZO)^4/TNO的設計最佳並實際鍍製反射率可達約81%,電阻率可達到1.453?10-3Ω-cm。模擬P-GaN/ITO/(TNO/AZO)^10/TNO時,反射率約可以達到94%。在紅光LED的部分,P-GaP/ITO/AZO/DBR/Ag的反射鏡設計可以比單純使用銀作為反射鏡反射率來的較高,實際做成元件並量測軸向光強可以發現有效的由478.3mcd提升至508.8mcd,在表面粗化後更是由812mcd提升至902mcd,有效提升軸向光強約11%。This study focused on optical design of reflectors and the films stacked by high refractive index material (TNO) and low refractive index (AZO) were deposited to make Distributed Bragg Reflectors. It was applied to blue LED, red LED and their device was made respectively for measurements.All transparent conductive oxide films were post-annealed at 370℃ in a vacuum. In blue LED part, the design of P-GaN/ITO/(TNO/AZO)^4/TNO was optimal, reflectivity of the coating reached approximately to 81%, and the conductive reflector showed a resistivity of 1.453?10-3Ω-cm. We used optic design of P-GaN/ITO/(TNO/AZO)^10/TNO to simulate coating with reflectivity approximately 94%. In red LED part, the reflectivity of P-GaP/ITO/AZO/DBR/Ag design is better than those using silver as the reflector. Actually we made device and measured the value of axial intensity, which increased from 478.3 mcd to 508.8 mcd. After surface roughening, the value of axial intensity increased from 812 mcd to 902 mcd. The design effectively enhanced axial intensity up to 11%.
    显示于类别:[光電科學研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML684检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明