高深寬比之石英晶體奈米針狀結構之製備與功能表面特性研究;Fabrication of High Aspect Ratio Quartz Nanoneedles for Functional Surfaces

NCU Institutional Repository > 工學院 > 機械工程學系 > 研究計畫 > Item 987654321/63261

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/63261

题名:	高深寬比之石英晶體奈米針狀結構之製備與功能表面特性研究;Fabrication of High Aspect Ratio Quartz Nanoneedles for Functional Surfaces
作者:	洪銘聰
贡献者:	國立中央大學機械工程學系
关键词:	機械工程;材料科技
日期:	2012-12-01
上传时间:	2014-03-17 14:25:19 (UTC+8)
出版者:	行政院國家科學委員會
摘要:	研究期間：10108~10207;Quartz is a very special material. It has good electric, mechanical, thermal stability performance. It also has good piezoelectricity that makes quartz widely used in my industry, including automobile, communication, computers, and electronics. Recently, due to the progress of nanotechnology, many novel quartz applications have been proposed, for examples, microfluidics chips and SAW device for gas and bio molecules detection. This new field combining quartz and MEMS has great potential. The micromachining is the enabling technology; however, it is also a bottleneck. Traditional machining for quartz requires the wire cutting and grinding processes. It is not possible to maintain the same precision when the size scales down. The micromaching or MEMS technology is one of the solutions. Comparing to the maturity of Silicon etching, quartz etching is very difficult and complicated. Wet etching usually affected by the crystallography planes and usually not be able to make high aspect ration structures. On the other hand, dry etching can make high aspect ration structures, but in return of high manufacturing cost. In this project, we use wet etching to make high aspect ratio, and high density nanoneedles and study its formation mechanism. We later use this nanoneedles structure on the SAW device to increase its performance.
關聯:	財團法人國家實驗研究院科技政策研究與資訊中心
显示于类别:	[機械工程學系] 研究計畫

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	391	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....