中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/65824
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78728/78728 (100%)
造访人次 : 33538929      在线人数 : 516
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/65824


    题名: 微型化寬頻六埠網路接收機前端電路;Wideband Six-Port Receiver Front-End With Compact Size
    作者: 劉宣宏;Liu,Xuan-Hong
    贡献者: 電機工程學系
    关键词: 六埠網路;接收機;橋式線圈;微型化;Six-port;Receiver;Bridged-T coil;Miniature;Compact size
    日期: 2014-08-20
    上传时间: 2014-10-15 17:11:08 (UTC+8)
    出版者: 國立中央大學
    摘要: 本論文以微型化寬頻六埠網路接收機前端電路為主題,以威爾金森分波器、直交耦合分波器及功率偵測器組成六埠網路接收機前端電路,並經由增加級數,以及使用集總元件構成橋式T線圈取代傳輸線,同時達到寬頻與微型化的效果。電路的製做上,則以平衡式電感與平行板電容,於積體被動元件(IPD)製程中實現微型化之橋式T線圈作為基本組件,進而能以系統級封裝方式實現寬頻六埠網路接收機之前端電路。

    電路設計上,首先以積體被動元件實現各式橋式T線圈做為測試電路, 驗證橋式T線圈電路模型與萃取方式之可行性。接著將橋式T線圈應用於威爾金森分波器設計,以大幅縮小電路尺寸而不減損頻寬,並分別實現二級與四級寬頻威爾金森分波器。其中二級威爾金森分波器中心頻率為2.2GHz,電氣尺寸僅惟中心頻率下之0.024λ0×0.020λ0,頻寬則為120%(反射損耗大於15dB);四級威爾金森分波器中心頻率設計於12GHz,頻寬可達173%(反射損耗大於10dB),電氣尺寸僅為中心頻率下的0.136λ0×0.047λ0。寬頻直交耦合分波器方面,二級直交耦合分波器中心頻率設計於1.95GHz,電氣尺寸僅為中心頻率0.028λ0×0.018λ0
    ,頻寬則為53.8%(反射損耗大於15dB);三級直交耦合分波器中心頻率為2.2GHz,頻寬可達83.6%,電氣尺寸僅為中心頻率下之0.045λ0×0.021λ0。

    最後,將威爾金森分波器、直交耦合分波器與功率偵測器整合成六埠網路接收機前端電路,分別實現2.6GHz之微型化六埠網路接收機前端電路(電氣尺寸0.05λ0×0.067λ0)與中心頻率1.95GHz之寬頻六埠網路接收機前端電路,其電氣尺寸為0.227λ0×0.147λ0,頻寬則為64.1%(反射損耗大於10dB)。

    本研究透過橋式T線圈有效縮小電路尺寸,再藉由多級電路設計有效提升頻寬,進而達成實現微型化寬頻六埠網路接收機的設計目標,可助於將六埠網路接收機技術導入次世代手持式無線通訊裝置。
    ;The target of this work is the development of wideband six-port receiver front-end with compact size, which is composed of a Wilkinson power divider, branch line couplers and power detectors. The wide bandwidth is achieved by multi-section designs of the divider and coupler, while the circuit size can be largely reduced by using the bridged-T coils to substitute transmission line sections. In this way, compact circuit size and wide bandwidth can be achieved simultaneously.
    The bridged-T coil can be designed as a wideband transmission-line equivalent. It can be realized by a balanced inductor and metal-insulator-metal (MIM) capacitors in the integrated passive device (IPD) process with very compact circuit size. The bridged-T coil can be used to replace the required transmission line sections in wideband divider and coupler designs to achieve wideband and compact six-port network using the IPD process, which can then enable the SiP (system in package) design of six-port receiver front-end.
    Firstly, test kits of bridge-T coils in IPD are implemented to demonstrate the design procedure and performance. They are then applied to wideband Wilkinson power divider designs to achieve compact size with no bandwidth reduction. Two kinds of Wilkinson power divider designs are presented, i.e. two-section and four-section designs. The center frequency of the two-section Wilkinson power divider is designed at f0 = 2.2 GHz with a circuit size of only 0.024λ0×0.020λ0 at f0 and a bandwidth of 120% (return loss > 15dB). The four-section one is designed with f0 = 12 GHz, and the circuit size is only 0.042λ0×0.017λ0 at f0 with a bandwidth of 173% (return loss > 10dB). Then, bridged-T coils are also used in the design of two kinds of wideband branch line coupler with compact size. The two-section branch line coupler is designed with an f0 of 1.95 GHz, and the circuit size is 0.028λ0×0.018λ0 at f0 with a bandwidth of 53.8% (return loss >15dB). The three-section one is designed at 2.2 GHz with bandwidth of 83.6% and a circuit size of 0.045λ0×0.021λ0 at f0.
    The proposed wideband Wilkinson power divider and branch line couplers are then integrated with power detectors to form two compact six-port receiver front-ends. The first one is designed at 2.6 GHz with an electrical size 0.024λ0×0.020λ0 at f0. The second one is designed at 1.95 GHz with a circuit size of 0.227λ0×0.147λ0 at f0 and a wideband bandwidth of 64.1% (return loss >10dB).

    By using bridged-T coils to implement transmission lines, the circuit size of six-port network can be largely reduced, while the bandwidth can be improved by using the multi-section divider and coupler designs. The proposed six-port receiver front-end features very compact size and wide bandwidth, and can be implemented in handheld wireless communication devices for mobile communication applications.
    显示于类别:[電機工程研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML755检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明