微小化之超寬頻帶通濾波器

NCUIR > College of Electrical Engineering & Computer Science > Graduate Institute of Electrical Engineering > Electronic Thesis & Dissertation > Item 987654321/69069

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/69069

Title:	微小化之超寬頻帶通濾波器
Authors:	黃家靖;Huang,Chia-ching
Contributors:	電機工程學系
Keywords:	帶通濾波器;多模態;分散式;被動等化器;bandpass filter;muti-mode
Date:	2015-08-31
Issue Date:	2015-09-23 15:12:57 (UTC+8)
Publisher:	國立中央大學
Abstract:	本論文利用微小化之超寬頻帶通濾波器為主軸，以應用於ALMA (Atacama Large Millimeter/Submillimeter Array) Band-1無線電波天文望遠鏡接收機。此帶通濾波器為接收系統內混波器後端之中頻濾波器，濾除雜訊干擾後將訊號傳遞至低雜訊放大器。電路製作上，以橋式T 線圈作為基本組件，採用積體被動元件(Integrated passive device,IPD)製程實現，以縮小電路尺寸利於系統封裝。電路設計上，首先介紹以積體被動元件實現之橋式T 線圈，橋式T 線圈能夠寬頻地等效傳輸線並達成電路面積微型化。微小化之超寬頻帶通濾波器，系採用多模態與分散式兩種傳輸線濾波器為架構，配合橋式T 線圈使用，能維持電路表現，並電路面積遠小於傳統濾波器所需。其中多模態寬頻帶通濾波器中心頻為8.5 GHz，電氣尺寸僅為中心頻率下之0.044λ0×0.052λ0；分散式寬頻帶通濾波器中心頻為8.2 GHz，電氣尺寸僅為中心頻率下之0.055λ0×0.063λ0。 ALMA Band-1接收機系統之中頻帶通濾波器規格要求：通帶內植入損耗越平坦越好或是通帶內低頻損耗能略大於高頻損耗。本論文使用被動等化器串接於微小化多模態帶通濾波器之後，以消除集膚效應(skin effect)造成損耗隨頻率變大的現象。此改良植入損耗之多模態寬頻帶通濾波器電路面積為1.6923 mm×1.931 mm，而電氣尺寸在中心頻率8.5 GHz下為0.048λ0×0.052λ0。本論文所實現微小化之超寬頻帶通濾波器，透過橋式T 線圈的技術能有效縮小電路面積，並加入等化器以增加通帶平坦度，皆使用積體被動元件(IPD)製程，如此實現ㄧ易整合於ALMA Band-1接收機中微小化之帶通濾波器。 ;In this work, in order to apply to the development of ALMA (Atacama Large Millimeter/Submillimeter Array) Band-1 receiver front-end, Miniaturized Ultra-Wide Bandpass Filter (BPF) is proposed. The proposed BPF filter out the noise and interference then deliver the signal to low-noise Amplifier (LNA).In fabrication, the bridged-T coil can be designed as a wideband transmission-line equivalent and be realized in integrated passive device (IPD) process with very compact circuit size, which makes the circuit easy to package. First, the bridged-T coils which are realized in integrated passive device (IPD) process are equivalent to transmission-line on wideband and reduce the circuits size. Miniaturized Ultra-Wide Bandpass Filters were design by Muti-mode resonator (MMR) and distributed filter, which were transmission line filters. To cooperate with the bridged-T coils, the frequency response vary slightly and the circuits size is much less than conventions. The MMR BPF was design center frequency at 8.5 GHz with circuit size of 0.044λ0×0.052λ0 .The distributed BPF was design center frequency at 8.2 GHz with circuit size of 0.055λ0×0.063λ0 . The request of BPF in ALMA Band-1 receiver is that the flatter in-band insertion loss, the better or the low frequency insertion loss is more than the high. Using the passive equalizer which cascades after MMR BPF to reduce the insertion loss grow with frequency phenomenon caused by skin effect. This MMR BPF with insertion loss improvement was design center frequency at 8.5 GHz with circuit size of 0.048λ0×0.052λ0 . By using bridged-T coils to implement transmission lines, the Miniaturized Ultra-Wide Bandpass Filter was realized with compact size, then cascades with an equalizer to improve the insertion loss variation. They are all fabrication in IPD process to realize a high integration Miniaturized Ultra-Wide Bandpass Filter in ALMA Band-1 receiver.
Appears in Collections:	[Graduate Institute of Electrical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	393	View/Open

社群 sharing

Loading...