光學積體電路波導繞線之訊號損耗最佳化;Waveguide Routing for Integrated Optics with Signal-Loss Optimization

NCU Institutional Repository > 資訊電機學院 > 電機工程研究所 > 博碩士論文 > Item 987654321/69507

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/69507

题名:	光學積體電路波導繞線之訊號損耗最佳化;Waveguide Routing for Integrated Optics with Signal-Loss Optimization
作者:	葉建仁;Ye,Jian-Ren
贡献者:	電機工程學系
关键词:	訊號損耗
日期:	2016-01-28
上传时间:	2016-03-17 20:47:23 (UTC+8)
出版者:	國立中央大學
摘要:	隨著超大型積體電路的發展，訊號傳遞的速度已經成為電子系統效能的主要瓶頸，然而近年來因為矽基積體光學(Silicon-Based Integrated Optics)的突破，目前已有相當成熟的光學元件製程以及整合電子與光學系統的技術，若在關鍵的通訊模組採用光學元件，訊號就能以更有效率的方式傳遞，因此，矽基光電系統整合(Optoelectronic System Integration in Silicon)漸漸受矚目。積體光學的其中一個重要議題為波導(Waveguide)繞線，波導的交錯(Crossing)與彎曲(Bend)的位置，會造成繞射或干涉的現象，使得訊號品質下降，由於光學訊號沒有像電子訊號一般的修復能力，在做波導繞線時應盡量避免可能造成訊號損失的狀況，現今已有相關的文獻，以傳統的演算法為基礎，在保證交錯的數量為最小的前提減少轉彎的數量，然而，在轉彎數量上似乎仍有改進的空間。因此本論文提出了一個以圖形為基礎的演算法來表示轉彎的真實情況，並藉由分組的技術使轉彎數大幅度減少。實驗結果顯示我們提出的方法能有效率降低訊號的損失。 ;With the advance of Very-Large-Scale Integration (VLSI) circuits, signal propagation delay has become the major bottleneck that limits circuits. Recently, due to the breakthroughs in silicon-based integrated optics, mature optical device process is available now for the integration optics between electronic and optics. If optical devices are used in critical communication module, signals can be propagated in a more efficient way. Therefore, Optoelectronic System Integration in Silicon (OPSIS) has become a popular research direction. One of the key issues in integrated optics is waveguide routing. Waveguide crossings and bends will incur diffraction and refraction and degrade the signal quality. Unlike electrical signals, optical signals lack the signal restoration capability. Those possible signal losses should be avoided in waveguide routing. There are some previous works that can guarantee the minimal number of crossings and reduce the number of bends based on traditional routing algorithms. However, the number of bends in previous works is still possible to be reduced. Therefore, this thesis proposes a graph-based algorithm to model the waveguide bends and reduce the number of bends by a grouping technique in the graph. The experimental results have demonstrated the efficiency of our methodology on decreasing the signal loss in waveguides.
显示于类别:	[電機工程研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	447	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....