中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/74876
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 41641152      在线人数 : 1396
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/74876


    题名: 結合雙二階廣義積分法與鎖頻迴路為基礎 之串聯式主動電力濾波器設計;Design of Series Active Power Filter Based on Dual Second-Order Generalized Integrator and Frequency Locked Loop
    作者: 吳孟倫;Wu, Meng-Lun
    贡献者: 電機工程學系
    关键词: 串聯式主動電力濾波器;電壓驟降;正負相序;電力品質
    日期: 2017-07-24
    上传时间: 2017-10-27 16:10:10 (UTC+8)
    出版者: 國立中央大學
    摘要: 串聯式主動電力濾波器因其主要處理電力系統上電壓之電力品質的問題,故又稱為動態電壓補償器(Dynamic Voltage Restorer , DVR)。其功能為解決電力線上發生單相或多相短路而造成的驟降及其他相伴的品質問題,故主要硬體建構在三相四線式的「直流-交流轉換器」之架構,又因欲快速地做出適當的補償動作,使得在負載端所得到的電壓能維持如同原本未發生問題的電壓情況。因此,如何快速地偵測及補償將是本文著重的課題。
    文中主要介紹了串聯式主動電力濾波器的基本概念、架構、補償方法,並在策略的部分做了效能及特性上的比較,且為了克服三相不平衡的情況,幾個能分析正、負相序的演算法也一併列入說明。最後,透過軟體模擬與比較來找出最佳補償方法,並且實現於數位訊號處理器和硬體迴圈,以驗證其效能和可行性。藉由觀察量測到的電壓波形訊號,可以明顯看出許多驟降問題得到改善,使負載端電壓得以維持在一定大小,以保護後端的敏感性負載。
    ;Series active power filter which is also named as ‘Dynamic Voltage Restorer (DVR)’ is mainly designed for solving the ‘sag’ or ‘swell’ phenomenon which may also accompany with other voltage quality problems on the distribution line or micro-grid system. To deal with the single or multiple phases voltage magnitude variation as well as some power quality problems, ‘three-phase four-wire’ inverter is adopted. As the sag (swell) event happening, the DVR must detect the voltage vector (both magnitude and phase), compute the appropriate quantity which is needed to be compensated, and then restore the load voltage to pre-sag condition as soon as possible.
    The functions, configuration, and the comparison of compensating strategies of DVR will be presented here. In addition, some introductions of analyzing Positive-Negative Sequence component algorithm for overcoming the unbalanced sagging are included. At last, the simulations are carried out by software. In order to show the efficiency and be used in practice, the best method is realized on Digital Signal Processor (DSP) and Hardware in the Loop (HIL) experimental platform. By observing the voltage waveform, lots of sagging problem have been improved and maintained the load voltage to a standard level.
    显示于类别:[電機工程研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML176检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明