English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78818/78818 (100%)
造訪人次 : 34695586      線上人數 : 1136
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/81917


    題名: 應用於太赫茲成像系統340-GHz反射器天線系統和85-GHz二倍頻器;Design of 340-GHz THz Reflector Antenna System Imaging Applications and 85-GHz Frequency Doubler
    作者: 盧奕翔;Lu, Yi-Hsiang
    貢獻者: 電機工程學系
    關鍵詞: 反射器;倍頻器;太赫茲;Reflector;Doubler;THz
    日期: 2019-10-01
    上傳時間: 2020-01-07 14:38:01 (UTC+8)
    出版者: 國立中央大學
    摘要: 本篇論文提出應用於太赫茲成像系統340-GHz的反射器天線系統和應用於340-GHz無線發射機中的85-GHz二倍頻器,反射器天線系統使用共聚焦橢球反射系統方式讓路徑長度誤差減小,透過入射反射原理並用公式計算入射反射角度、解析度、路徑長度誤差等與軟體模擬太赫茲輻射路徑,反射器天線系統使用兩個拋物面反射器、一個橢球面反射器及一個平面鏡組成,在饋入端拋物面反射器的焦點上輻射太赫茲波最終反射器天線系統使太赫茲波聚焦在3 m遠,將平面鏡順時針方向旋轉5.58度和逆時針方向旋轉5.58度可掃描距離3 m遠帶測物30×30 cm^2的面積且具有0.8 cm的解析度。
    應用於340-GHz無限發射機中的85-GHz二倍頻器使用TSMC 40-nm互補式金氧半導體製程實現,採用差動訊號給入電晶體在輸入端,在二倍頻器輸入端使用傳輸線將輸入阻抗由高阻抗轉到低阻抗並運用變壓器將雙端輸入轉成單端輸入且可將頻寬提高,輸出端的匹配使用變壓器,最後二倍頻器的輸出功率為-3.8 dBm,轉換增益為-9.8 dB,基頻抑制比大於33 dB,3dB頻寬為154-GHz~182-GHz(16.7%),功耗為19 mW。
    ;A 340-GHz reflector antenna system applied to THz imaging system and an 85-GHz frequency doubler applied to the 340-GHz transmitter are proposed in this thesis.
    The reflector antenna system is a confocal ellipsoidal reflection system which can reduce path length error. This system consists of two parabolic reflectors, an ellipsoidal reflector, and a plane mirror. We can calculate the incident angle, reflection angle, resolution, path length error, etc., by the law of reflection and some formulas.
    When the THz radiation is at the focus of the feed parabolic reflector, the system can focus the THz wave at 3 m. When the plane mirror rotates 5.58° clockwise and rotates 5.58° counterclockwise, the system is able to scan an area 30×30 cm^2 with resolution of 0.8 cm at 3 meters away.
    The 85-GHz frequency doubler for the 340-GHz transmitter is realized in TSMC 40-nm CMOS process. The input of the transistor is a differential signal. In order to shift the input impedance from high impedance to low impedance, we add transmission lines at the input of the doubler. A transformer is used to convert double-ended into single-ended input and increase the frequency bandwidth. The output matching of the doubler is designed with a transformer. The 85-GHz doubler can provide -3.8 dBm output power with a conversion gain of -9.8 dB, fundamental rejection ratio of 33 dB, and 16.7% 3dB bandwidth (154~182 GHz). In the end, total power consumption is only 19 mW.
    顯示於類別:[電機工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML217檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明