中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/84167
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78852/78852 (100%)
造訪人次 : 38580523      線上人數 : 685
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/84167


    題名: 改良轉子位置估測之永磁同步馬達直接轉矩控制;Direct Torque Control of Permanent Magnet Synchronous Motor with Improved Rotor Position Estimation
    作者: 鍾嘉倫;Chung, Chia-Lun
    貢獻者: 電機工程學系
    關鍵詞: 永磁同步馬達;最小平方法;空間向量脈波寬度調變;直接轉 矩控制;Permanent magnet synchronous motor;least square method;space vector pulse width modulation;direct torque control
    日期: 2020-07-28
    上傳時間: 2020-09-02 18:26:10 (UTC+8)
    出版者: 國立中央大學
    摘要: 本論文提出了使用低解析度的霍爾感測器,改良轉子位置估測方法
    並應用於永磁同步馬達(Permanent Magnet Synchronous Motor, PMSM)控
    制。霍爾感測器只能偵測馬達換相時的轉子角度位置,在其它位置則藉
    由估測來獲得。但是由於其本身低解析度的特性,加上安裝誤差導致不
    對稱偏移,造成在位置估測上造成誤差,無法得到準確的轉子位置,使
    得系統不穩定。
    為了解決霍爾感測器低解析度及位置偏差的問題,本論文利用霍爾
    感測器的換相點來估測轉子位置,提出了使用最小平方法,來降低位置
    誤差且達到和高解析度感測器一樣的效果。以此位置估測方法,應用於
    一種結合空間向量脈波寬度調變(Space Vector Pluse Modulation , SVPWM)
    和直接轉矩控制(Direct Torque Control, DTC)的方法來控制永磁同步馬
    達。;This thesis proposes a low-resolution Hall sensor to improve the rotor position
    estimation method and apply it to the Permanent Magnet Synchronous
    Motor (PMSM) control. The Hall sensor can only obtain the angular position of
    the rotor when the motor is commutated, and it can be obtained by estimation
    at other times. Based on its low resolution characteristics, coupled with installation
    errors, it leads to an asymmetric offset, resulting in errors are caused in
    the position estimation, and the accurate rotor position cannot be obtained, making
    the system unstable.
    In order to solve the problem of low resolution and position deviation of
    the Hall sensor, this article proposes to use the least square method and use the
    commutation point of the Hall sensor to estimate the rotor position to reduce the
    position error and achieve high resolution degree sensor like effect. In addition
    to the position estimation method, a method combining Space Vector Pluse
    Modulation (SVPWM) and Direct Torque Control (DTC) is also used to control
    the motor.
    顯示於類別:[電機工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML100檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明