應用PMMA樣板鍵合技術實施類積層製造方法製作微流道系統晶片之研究;Fabrication of Microfluidic System of Chip by PMMA Bonding Technology and Additive Manufacturing

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/84305

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/84305

題名:	應用PMMA樣板鍵合技術實施類積層製造方法製作微流道系統晶片之研究;Fabrication of Microfluidic System of Chip by PMMA Bonding Technology and Additive Manufacturing
作者:	蔡易松;Tsai, Yi-Sung
貢獻者:	機械工程學系
關鍵詞:	PMMA 鍵合;微流道晶片;光彈法分析;雷射刻印 PMMA;積層製造;PMMA bonding;micro-channel wafer;photoelastic analysis;laser marking PMMA;Additive Manufacturing
日期:	2020-06-30
上傳時間:	2020-09-02 18:59:57 (UTC+8)
出版者:	國立中央大學
摘要:	本研究為使用有刻印的 PMMA 板夾入 PMMA 基板內作為微流道晶片，並置入鍵合溶劑(丙酮、酒精)進行鍵合，觀察其鍵合狀況。因 PMMA 對鍵合溶劑有不同的反應性，並隨著施予鍵合壓力的上升有所變化。因此本次實驗設計為鍵合壓力參數 30N、40N、50N，以酒精、丙酮及其混和溶劑進行鍵合。使用光學顯微鏡觀察微觀結構、並以數位光彈進行應力分析以及使用拉伸試驗觀察其鍵合強度。經實驗發現丙酮對 PMMA 之反應性較酒精強，鍵合能力較佳，但對 PMMA 材料的結構也有較多的破壞，而鍵合壓力的上升直觀的使鍵合強度隨之上升。;In this study, we used a marked PMMA board was sandwiched between PMMA substrates as a micro-channel wafer, and a bonding solvent (acetone, alcohol) was placed for bonding, and the bonding status was observed. PMMA has different reactivity to the bonding solvent and changes with the increase of the bonding pressure applied. Therefore, this experiment is designed for bonding pressure parameters of 30N, 40N, and 50N, and bonding is performed with alcohol, acetone, and their mixed solvents. Observe the microstructure using an optical microscope, perform stress analysis with digital photoelasticity, and observe the bonding strength using the Lashin test. It has been found through experiments that acetone is more reactive to PMMA than alcohol and has better bonding ability, but it also has more damage to the structure of PMMA materials, and the increase in bonding force intuitively increases the bonding strength.
顯示於類別:	[機械工程研究所] 博碩士論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	67	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....