中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/85069
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 41649329      在线人数 : 1388
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/85069


    题名: 智慧型天線系統之關鍵被動組件研製;Designs of Key Passive Building Blocks for a Smart Antenna System
    作者: 江慶益;Jiang, Qing-yi
    贡献者: 電機工程學系
    关键词: 波束成型網路;六埠網路
    日期: 2020-10-21
    上传时间: 2021-03-18 17:33:48 (UTC+8)
    出版者: 國立中央大學
    摘要: 本論文以智慧型天線系統之波束成型模組(Beam-forming module)與訊號來向(Direction of Array, DOA)偵測器中的關鍵被動組件為設計目標。首先,因應第五代行動通訊發展需求,本論文題出操作於28 GHz頻段之切換式波束成型晶片,設計上使用橋式T線圈取代傳輸線以縮小4×4巴特勒矩陣的電路尺寸,進而與吸收式單刀四擲開關整合成切換式波束成型晶片,並實現於砷化鎵製程中。整體晶片尺寸僅1.798 mm×1.85 mm,在28 GHz的電氣尺寸為0.172 λ0 ×0.168 λ0。其次,因應多頻、多模的操作需求,採用雙頻橋式T線圈實現微型化雙頻六埠網路設計,以做為訊號來向偵測器的基本組件。此雙頻六埠網路的操作頻率為2.45與5.8 GHz,並實現於積體被動電路(IPD)製程中,電路面積僅5.85 mm×5.47 mm,在2.45 GHz的操作頻率下電氣尺寸為0.0477 λ0 ×0.0446 λ0,在5.8 GHz的頻率下電氣尺寸則為0.113 λ0 ×0.105 λ0。;In this thesis, a compact switched beamformer for use in a beam-forming antenna array and a dual-band six-port network for use in a direction of arrival estimator are proposed, which will serve as key passive building block designs of a smart antenna system. First, the design of an on-chip switched beamforming network is demonstrated at 28 GHz, which is based on the integration of an absorptive single-pole four-throw (SP4T) switch and a 4×4 Butler matrix using the GaAs pHEMT process. A compact circuit size is achieved by using bridged-T coils to replace transmission line sections in the 4×4 Butler matrix. Specifically, the circuit size is only 1.798 mm×1.85 mm while the electrical size is around 0.172 λ0×0.168 λ0 at 28 GHz. Driven by the demand of multi-frequency and multi-mode wireless communication apparatus, a dual-band six-port network is also developed, in which dual-band bridged-T coils are employed as the buildings blocks. The two operating frequencies of the dual-band six-port network are set as 2.45 and 5.8 GHz, and it is implemented using an integrated passive circuit (IPD) process. The circuit size is only 5.85 mm×5.47 mm. The corresponding electrical size is around 0.0477 λ0× 0.0446 λ0 at 2.4 GHz and 0.113 λ0×0.105 λ0 at 5.8 GHz.
    显示于类别:[電機工程研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML83检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明