運用步階式阻抗共振器之多頻低通與帶通濾波器;Multi-Channel Low-pass and Band-pass Filters Using Stepped-Impedance Resonators

NCU Institutional Repository > 資訊電機學院 > 電機工程研究所 > 博碩士論文 > Item 987654321/90025

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/90025

題名:	運用步階式阻抗共振器之多頻低通與帶通濾波器;Multi-Channel Low-pass and Band-pass Filters Using Stepped-Impedance Resonators
作者:	洪偉傑;Hung, Wei-Chieh
貢獻者:	電機工程學系
關鍵詞:	步階式阻抗共振器;多頻帶;stepped Impedance resonators;multi-channel
日期:	2022-08-22
上傳時間:	2022-10-04 12:08:23 (UTC+8)
出版者:	國立中央大學
摘要:	本論文之多頻帶濾波器之通帶由一低通濾波器以及兩組半波長步階式阻抗共振器組成，使用散佈式耦合技術減少頻帶間的負載效應，且帶通濾波器的每兩個通帶由一組半波長步階式阻抗共振器控制，由於使用散佈式耦合技術因此不需要額外的匹配電路來設計帶通濾波器的電路。使用了半波長步階式阻抗共振器可以相較於傳統半波長共振器的電路面積縮小，將四個通帶分別設計在3、4、5、6 GHz，論文中分別以三種不同低通濾波器使用以RO4003C，介電係數3.55，厚度0.8mm的板材來驗證設計之可能性。第一個電路當中的低通濾波器為步階式阻抗低通濾波器，在通帶內的反射損耗從0 GHz至2 GHz皆大於20 dB，且有一個接近2 GHz的3-dB截止頻率為1.93 GHz，截止帶大於20 dB的範圍從 2.66 GHz 至9.32 GHz。第二個電路中的低通濾波器是基於第一個電路的低通濾波器增加一段並聯的傳輸線來增加零點；第三種低通濾波器則為以串聯兩組由一對耦合線連接一開路殘段結構當成一單位所組成的低通濾波器。第二個電路在通帶內的反射損耗從0 GHz至1.85 GHz皆大於10 dB，且3-dB截止頻率為1.93 GHz，截止帶大於20 dB的範圍從 2.68 GHz 至6.86 GHz。第三種低通濾波器的3-dB通帶從0 GHz 至 1.9 GHz，通帶內的反射損耗從0 GHz 至 1.85 GHz 皆大於10 dB，截止帶大於20 dB之範圍從2.86 GHz 至 9.85 GHz;The passband of the multi-band filter of this paper consists of a low-pass filter and two pairs of half-wavelength stepped impedance resonators. Distributed coupling technique is used to reduce the loading effect between the passbands, and every two passbands of the band-pass filter are controlled by a set of half-wavelength stepped impedance resonators. The use of half-wavelength stepped impedance resonators can reduce the circuit size compared to traditional half-wavelength resonators. The frequency of the passbands is designed in 3,4,5 and 6 GHz. In the paper, three different low-pass filters are fabricated on Rogers RO4003 substrate with a relative dielectric constant of 3.55, a thickness of 0.8 mm, and a loss tangent of 0.0027 to verify the possibility of the design. The low-pass filter in the first circuit is a stepped impedance low-pass filter. The return loss in the passband is greater than 20 dB from 0 GHz to 2 GHz, and there is a 3-dB cutoff frequency close to 2 GHz at 1.93 GHz. The cutoff band is greater than 20 dB from 2.66 GHz to 9.32 GHz. The low-pass filter in the second circuit is based on the band-pass filter of the first circuit by adding a shunt transmission line to increase the transmission zeros. The third type of the low-pass filter is a low-pass filter composed of two series circuit of a pair of coupled lines connected to an open stub structure as a unit. The return loss of the second circuit in the passband is greater than 10 dB from 0 GHz to 1.85 GHz, and the 3-dB cutoff frequency is 1.93 GHz. The cutoff band is greater than 20 dB from 2.68 GHz to 6.86 GHz. The third low-pass filter has a 3-dB passband from 0 GHz to 1.9 GHz, and the return loss in the passband is greater than 10 dB from 0 GHz to 1.85 GHz. The cutoff band is greater than 20 dB from 2.86 GHz to 9.85 GHz.
顯示於類別:	[電機工程研究所] 博碩士論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	53	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....