中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/92845
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78852/78852 (100%)
造訪人次 : 37801890      線上人數 : 459
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/92845


    題名: 使用短路共振器加上開路殘段之多工器的設計與分析;Design and Analysis of Multiplexers Using Short-Circuited Resonators and Open-Ended Stubs
    作者: 林子翔;Lin, Tz-Xiang
    貢獻者: 電機工程學系
    關鍵詞: 濾波器;三工器;多工器
    日期: 2023-08-11
    上傳時間: 2023-10-04 16:11:48 (UTC+8)
    出版者: 國立中央大學
    摘要: 本論文之三工濾波器之通帶是由短路半波長共振器所組成的,帶通濾
    波器的通帶是由 4 個共振器所控制的,並使用開路殘段在其他通帶頻率點
    創造一個傳輸零點,來增加電路間的隔離度,最後在使用 T 型饋入線來直
    接饋入輸入能量。
    第一個電路是由短路半波長共振器加上開路殘段所組成的雙工四階濾
    波器,中心頻率分別是 1.8GHz 及 2.1GHz,並在 1.8GHz 的濾波器上在
    2.1GHz 的頻率點上設計一個傳輸零點,最後再使用直接饋入的方式做輸
    入,這樣可以使兩個濾波器的隔離度大於 50dB。
    第二個電路是在原有的電路基礎上再設計一個中心頻率為 1.5GHz 的
    濾波器,並在 1.8GHz 的頻率點上設計一個傳輸零點,最後再與其他的濾
    波器組合成一個三工的濾波器,其隔離度也都大於 50dB,但本論文採用 T
    型直接饋入的方式做輸入,因此設計與調整各個濾波器的輸入阻抗將變得
    尤為重要。;This thesis focuses on the design of a triplexer composed of short-circuited
    half-wavelength resonators for the passband. The passband of the bandpass filter
    is controlled by four resonators. Open-ended stubs are used at other frequencies
    within the passband to create a transmission zero, enhancing the isolation
    between different circuits. The triplexer utilizes a T-shaped feeding line for
    direct input energy feeding.
    The first circuit is a dual-band fourth-order filter consisting of short circuited half-wavelength resonators and open-ended stubs. The center
    frequencies are 1.8 GHz and 2.1 GHz. A transmission zero is designed at the
    frequency point of 2.1 GHz in the 1.8 GHz filter. Direct input feeding is
    employed, achieving an isolation greater than 50 dB between the two filters.
    The second circuit adds an additional filter with a center frequency of 1.5
    GHz to the existing circuit. A transmission zero is designed at the frequency
    point of 1.8 GHz in this filter. Finally, it is combined with other filters to form a
    triplexer. The isolation between all filters is greater than 50 dB. However, this
    thesis focuses on the T-shaped direct input feeding method, making the design
    and adjustment of the input impedance for each filter crucial.
    顯示於類別:[電機工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML43檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明