中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/9486
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78818/78818 (100%)
造訪人次 : 34739961      線上人數 : 839
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/9486


    題名: 滑動模式控制於切換式磁阻馬達位移控制研究;Motion Control of Switched Reluctance Motor via Sliding Control
    作者: 張捷修;Chien-Hsiu Chang
    貢獻者: 電機工程研究所
    關鍵詞: 最佳化控制;位移控制;滑動控制;定位控制;切換式磁阻馬達;motion control;Optimal control;Sliding mode control;switched reluctance motor;position control
    日期: 2003-07-03
    上傳時間: 2009-09-22 11:48:49 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: I 摘要 切換式磁阻馬達(Switched Reluctance Motor;SRM)具有低成 本、效率高優點之驅動馬達,由於無整流子及碳刷,適用於高速運轉, 在一般工業應用場合中切換式磁阻馬達的應用目前都是速度控制,至 於位置控制的應用尚未有相關文獻報告,在機械運動中,好的致動器 除了要能做速度控制外,也要能做位置控制,如此的致動器方能被廣 泛應用。 因此,本文提出二種滑動模式控制方法將切換式磁阻馬達應用 於位置控制,其一為改善最佳控制方法易受干擾影響之缺點,設計出 基於最佳控制之全不變性滑動模式控制(Total Sliding Mode Control; TSMC)之切換式磁阻馬達定位控制器,改善系統擾動對位移之影 響。另者為保證系統軌跡完全遵循所設定的梯形速度軌跡,本論文利 用滑動模式之不變性特性設計多段式滑動模式控制(Multi-Segment Sliding Mode Control;MSSMC) 梯形之速度軌跡控制器,改善轉速 及加速度超越量問題,以獲得更精確的定位控制。 最後,為證實本論文提出之方法在切換式磁阻馬達位移控制之 可行性,本論文除了以軟體進行模擬驗證外,並以馬達專用DSP 配 合硬體電路完成切換式磁阻馬達驅動系統,進行實際驗證,由實驗結 果可知本論文提出之切換式磁阻馬達位移控制方法確實可行。 Abstract Since the switched reluctance motor(SRM) has high starting torque and high speed operation characteristics, it is good adaptation for industrial application. No thesis about position control of SRM was publicly discussed until today. The purpose of this paper implemented the position control of SRM. Two control strategy is proposed. The first, one of control strategy used total sliding mode control law(TSMC) which was designed same performance described by linear-quadratic(LQ) method. TSMC improve perturbation of position due to parameter variation and load disturbance. Secondly, this paper propose multi-segment sliding mode control (MSSMC) to solve a particular increment motion control problem specified by a trapezoidal velocity profile. Each segment of the multi-segment switch surfaces is designed to match the corresponding part. Finally, a digital signal processor(DSP)-base experiment SRM system is built to demonstrate all the proposed algorithms.
    顯示於類別:[電機工程研究所] 博碩士論文

    文件中的檔案:

    檔案 大小格式瀏覽次數


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明