中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/9551
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 66984/66984 (100%)
造访人次 : 23032089      在线人数 : 431
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/9551


    题名: 大面積矽偵測器的製程改良與元件設計;Studies of Process Improvement and Device Design for Large-Area Silicon Detector
    作者: 賈國揚;Kuo-Yang Chia
    贡献者: 電機工程研究所
    关键词: 最佳化;高電壓;粒子偵測器;矽偵測器;防護圈;低漏電流;leakage current;breakdown voltage;strip;field plate;guard ring;optimal;silicon detector
    日期: 2003-06-27
    上传时间: 2009-09-22 11:50:22 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 本論文的主要目的是希望能藉由製程條件的改善與元件結構的改良提昇大面積矽偵測器的特性。為了降低漏電流及提高崩潰電壓,本論文探討偵測器的背面製程對元件特性的影響,並且證實利用磷摻雜的多晶矽外質去疵技術可以減少元件內部的缺陷,使元件特性獲得明顯的改善。 另外,在元件結構方面也藉由模擬軟體與實驗測試鍵(test-key)結果的協助,獲得最佳的相關元件構造參數,這些參數包括合適的氧化層厚度、接面深度、正面電極延伸長度及防護圈的配置等等。 In order to obtain a large-area silicon detector with good performances, such as low leakage current, high breakdown voltage and high reliability, the process improvement and structure design for a large-area silicon strip detector had been studied in this thesis. Firstly, an overview including fundamental considerations, operation principles, and basic processing has been given, and accordingly the required structure and performance of the detector were summarized. Then a lot of methods to reduce leakage current and furthermore increase breakdown voltage of the device by means of optimized structure and improved processing were presented. With the measured results of test-keys, the simulated device structure had been verified to have the good performances. A single-sided silicon strip detector with area of 1.12 cm2 and having an average leakage current reduced from 410 down to about 210 nA per diode strip after employing a backside phosphor-doped polysilicon gettering process at 985 ℃ had been obtained. So, it is possible to minimize the device leakage current with the well-developed gettering process. The experimental results of test-keys not only verified the simulation data but also provided the guidelines to obtain an optimum device structure with specified length of field-plate, spacing between two strips, and lateral radius of curvature of the strip corners.
    显示于类别:[電機工程研究所] 博碩士論文

    文件中的档案:

    档案 大小格式浏览次数
    0KbUnknown499检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈  - 隱私權政策聲明