中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/9639
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41668880      線上人數 : 1290
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/9639


    題名: 一維電磁能隙及共振器之設計;The Design of One-Dimensional Electromagnetic Bandgap Structures and Resonators
    作者: 劉育青;Yu-Ching Liu
    貢獻者: 電機工程研究所
    關鍵詞: 光子能隙;電磁能隙;共振器;週期性結構;Band-stop filter;periodical structure;electromagnetic bandgap;resonator;photonic bandgap
    日期: 2003-06-28
    上傳時間: 2009-09-22 11:52:24 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 本篇論文主要是針對一維光子能隙(Photonic Bandgap簡稱PBG)結構電路,提出新的設計公式。所提出之公式包含了電路截止帶中心頻率的設計公式與截止帶頻寬大小的預測公式,而此兩個設計公式,分別是利用電磁波多重反射之概念與ABCD矩陣的數值分析方式所推導而得。對於本論文所提出之設計公式,由實際電路的模擬與量測結果可知,電路截止帶之中心頻率與設計目標有良好的一致性。對於電路截止帶之頻寬大小,除了高頻時,因為電路出現寄生電容效應而造成頻寬大小有所誤差外,實際電路量測之截止帶頻寬大小與利用本文預測公式所得的預測值也相互符合。 本論文也利用PBG結構來設計兩種共振器,第一種共振器是利用一共振線與共振線兩邊之PBG結構反射面所構成。第二種是於第一種共振器中加入一電容元件,使其共振器能利用改變電容值大小而達到調整共振頻率的目的。利用本論文提出之設計方式來設計此兩種共振器,由實際電路的模擬與量測結果可知,本論文所提出之設計方式能提供設計者準確的設計共振器之共振頻率。 In this thesis, novel design formulas for the one-dimensional photonic bandgap(PBG) structures are presented. Using the formulas, the center frequency and bandwidth of the bandgap can be accurately predicted. Both the formulas are developed using the multiple reflection concept of electromagnetic waves and the analysis of ABCD matrix. To verifiy the formulas, several one-dimensional PBG structure circuits are manufactured and measured. The results of simulation and measurement are generally in good agreement. When the frequency is higher than the center frequency of the bandgap, the prediction becomes less accurate due to the high frequency effect of parasitic capacitance. Two types of resonators maily formed by PGB structures are also demonstrated in the thesis. One consists of a center resonant-line surrounded by two PBG reflectors, and the other is formed by mounting a capacitance in the middle of a PBG structure. Using the design procedure presented in this thesis, the resonant frequency of the resonator can be easily determined. Good agreement between simulation and measurement is also obtained.
    顯示於類別:[電機工程研究所] 博碩士論文

    文件中的檔案:

    檔案 大小格式瀏覽次數


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明