Programmable System-on-Chip for Silicon Prototyping

NCU Institutional Repository > 資訊電機學院 > 電機工程學系 > 期刊論文 > Item 987654321/52094

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/52094

题名:	Programmable System-on-Chip for Silicon Prototyping
作者:	Huang,CM;Wu,CM;Yang,CC;Chen,SL;Chen,CS;Wang,JJ;Lee,KJ;Wey,CL
贡献者:	電機工程學系
关键词:	FPGA IMPLEMENTATION;CONTROL ALGORITHM;CONTROLLERS
日期:	2011
上传时间:	2012-03-28 10:15:18 (UTC+8)
出版者:	國立中央大學
摘要:	This paper presents a programmable system-on-chip (SoC) design methodology which integrates multiple heterogeneous SoC design projects into a single chip such that the total silicon prototyping cost for these projects can be greatly reduced by sharing a common SoC platform. In this implementation, an integrated SoC platform is comprised of eight SoC projects. When these eight SoC projects are designed separately, the total area is approximately 143.03 mm(2), while the area of the integrated platform is about 24.43 mm(2). The area reduction is significant, so is the fabrication cost. Once the integrated platform chip is fabricated, three programming schemes are carried out to allow the integrated chip to act as the individual SoC design projects. A test chip is designed and implemented using the TSMC 0.13-mu m CMOS generic logic process technology.
關聯:	IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
显示于类别:	[電機工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	446	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing