姓名 |
陳毓程(CHEN YU CHENG)
查詢紙本館藏 |
畢業系所 |
機械工程學系在職專班 |
論文名稱 |
氣壓成形製程的精準度探討 (Discussion on Precison and Accuracy Capability of Gas Forming Process)
|
相關論文 | |
檔案 |
[Endnote RIS 格式]
[Bibtex 格式]
[相關文章] [文章引用] [完整記錄] [館藏目錄] [檢視] [下載]- 本電子論文使用權限為同意立即開放。
- 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
- 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
|
摘要(中) |
本研究是製作一組量測治具並使用游標卡尺來測量手機外殼(手機背面機殼) ,將量測到的數據,利用品質管理上評估製程能力非常重要的三個指標,即Ca值、Cp值和Cpk值,Ca代表製程的準確度,Cp代表製程的精密度, Cpk則是綜合製程能力指數,透過以上這些指標,去分析這項製程的實用性。 |
摘要(英) |
This study is to create a set of measuring fixture and use the vernier caliper to measure the phone case (cell phone back case), the measured data. Then we use three important indices of evaluation of process capability ,including Ca , Cp and Cpk. Ca represents the accuracy of capability. Cp represents the precision of capability. Cpk is the Process Capability Index. Through these indices, we can analyze the practicality of this process. Find the disadvantages that we can improve. |
關鍵字(中) |
★ 製程能力指標 ★ 準確度 ★ 精密度 |
關鍵字(英) |
|
論文目次 |
目錄
摘 要 i
Abstract ii
誌 謝 iii
圖目錄 vii
表目錄 x
符號說明 xi
第一章: 緒論 1
1-1. 前言 1
1-2. 製程指標Ca/Cp/ Cpk的定義及意義 2
1-3. 製程準確度Ca之製程能力解釋 3
1-3-1. 製程準確度Ca之計算公式 3
1-3-2. Ca等級評估 4
1-4. 製程精密度Cp之製程能力解釋 5
1-4-1. 製程精密度Cp之計算公式 6
1-4-2. Cp之等級評估 7
1-5. 製程能力指數Cpk 解釋 8
1-5-1. 製程能力指標Cpk之計算公式 8
1-5-2. Cpk之等級評估 9
1-5-3. Cpk值要求管控1.33的意義: 10
第二章: 實驗方法與量測步驟 11
2-1. 實驗設備 11
2-2. 設計量具過程 13
2-3. 量測方法1 14
2-3-1. 三角階梯墊塊量測方法與分析 14
2-3-2. 方法分析 14
2-4. 量測方法2 15
2-4-1. 量具設計概念 15
2-4-2. 量具零件介紹 15
2-4-3. 操作方法 17
2-4-4. 方法分析 17
2-5. 量測方法3 19
2-5-1. 量具設計概念 19
2-5-2. 量具零件介紹 19
2-5-3. 操作方法 20
2-5-4. 方法分析 20
2-6. 量測方法比較 23
第三章: 量測結果與討論 24
3-1. 量測方法1-測量數據 24
3-2. 量測方法2-測量數據 26
3-3. 量測方法3-測量數據 28
3-4. 重現 Cp /Cpk值之等級評估 30
第四章: 結論 34
4-1. 結論 34
4-2. 未來展望 34
參考文獻 35 |
參考文獻 |
【1】 賴柏先, 製程能力指標Cpk估計方法之比較,2006.
【2】 Lai K. Chan, Smiley W. Cheng and Frederick A. Spiring, “ A New Measure of Process Capability: Cpm” Journal of Quality Technology, July 1988.
【3】 Victor E. Kane, “Process Capability Indices”, Journal of quiality technology, vol 18, pp.41-52, 1986.
【4】 蘇明鴻,「考慮制程能力指針Cpk抽樣誤差以達到品質保證之應用」,碩士論文,國立屏東商業技術學院商樣自動化與管理系,屏東(2004)。
【5】 李國城, 統計製程管制軟體發展;Software of Statistical Process Control Technology Development, 2004.
|
指導教授 |
李雄
|
審核日期 |
2018-1-24 |
推文 |
facebook plurk twitter funp google live udn HD myshare reddit netvibes friend youpush delicious baidu
|
網路書籤 |
Google bookmarks del.icio.us hemidemi myshare
|