English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 94201/94201 (100%)
造訪人次 : 81599528      線上人數 : 3006
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/103309


    題名: A comparison of crystallization behaviors of laser spot welded Zr-Cu-Ag-Al and Zr-Cu-Ni-Al bulk metallic glasses
    作者: 鄭憲清;Wang, Huei-Sen;Su, Yan-Zong;Shian-Ching Jang, Jason;Chen, Hou-Guang
    貢獻者: 工學院材料科學與工程研究所
    關鍵詞: Composite materials;Electron microscopy;Microstructure;Welding
    日期: 2013-04-15
    上傳時間: 2026-04-23 11:27:37 (UTC+8)
    出版者: Elsevier BV;Elsevier B.V
    摘要: 摘要: A novel Ni-free Zr–Cu–Ag–Al ((Zr48Cu36Ag8Al8)Si0.75) and a Zr–Cu–Ni–Al ((Zr53Cu30Ni9Al8)Si0.5) bulk metallic glass (BMG), for comparison, were employed for Nd:YAG laser spot welding with three pre-selected energy inputs, including a low (6.2 J), a medium (8.0 J) and a high (9.2 J) energy input. After the welding process, the microstructure evolution, glass-forming ability (GFA) and mechanical properties of the welded samples were determined by a combination of scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and the Vicker's microhardness test. The results showed the Zr–Cu–Ag–Al BMG has better weldability than the Zr–Cu–Ni–Al BMG. No crystallization was observed in the weld fusion zones (WFZs) or heat-affected zones (HAZs) of the welds under three pre-selected energy inputs. Therefore, the GFA indices of ΔTx (ΔTx = Tx − Tg, Tx is the crystallization temperature and Tg is the glass transition temperature), γ (γ = Tx/(Tg + Tl), Tl is the liquidus temperature) and γm (γm = (2Tx − Tg)/Tl), and the mechanical properties of the Zr–Cu–Ag–Al BMG welds did not differ significantly in comparison to the parent material (PM). For Zr–Cu–Ni–Al BMG, HAZ crystallization was unavoidable when a lower energy input was used; therefore, the GFA indices and mechanical properties of the weld were affected. Furthermore, when the GFA indices, ΔTx, γ and γm, were used to predict the thermal stability of the BMG HAZs, ΔTx seemed to correspond more directly to the HAZ crystallization behaviors in this study. It was observed that the ΔTx value of Zr–Cu–Ag–Al BMG was about 26% higher compared to that of Zr–Cu–Ni–Al BMG. ► A Zr–Cu–Ag–Al BMG and, for comparison, a Zr–Cu–Ni–Al BMG, were laser spot welded. ► The results showed the Zr–Cu–Ag–Al BMG has better weldability. ► For the Zr–Cu–Ni–Al BMG, HAZ crystallization was unavoidable. ► However, no crystallization was observed in the Zr–Cu–Ag–Al BMG welds. ► GFA index, ΔTx, is directly corresponded to the BMG HAZ crystallization behaviors.
    出版者: Elsevier B.V
    出版日期: 2013-04-15
    出處: Materials chemistry and physics, 2013-04, Vol.139 (1), p.215-219
    版權: 2013 Elsevier B.V.
    識別號: ISSN: 0254-0584
    識別號: EISSN: 1879-3312
    識別號: DOI: 10.1016/j.matchemphys.2013.01.025
    顯示於類別:[材料科學與工程研究所 ] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML14檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明