Characterizing aberration of a pressure-actuated tunable biconvex microlens with a simple spherically-corrected design

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/108461

請使用永久網址來引用或連結此文件: https://ir.lib.ncu.edu.tw/handle/987654321/108461

題名:	Characterizing aberration of a pressure-actuated tunable biconvex microlens with a simple spherically-corrected design
作者:	傅尹坤;Fuh, Yiin-Kuen;Lin, Ming-Xin;Lee, Shyong
貢獻者:	工學院機械工程學系
關鍵詞:	Aberration;Biconvex membrane lens;Design engineering;Dynamical systems;Dynamics;Fluid dynamics;Fluid flow;Fluids;Microlens;Spherical aberration;Thickness ratio;Tunable lens;ZEMAX simulation
日期:	2012-12-01
上傳時間:	2026-04-23 14:50:33 (UTC+8)
出版者:	Elsevier Ltd.;Elsevier Ltd
摘要:	摘要： A tunable biconvex microlens of 1000μm diameter is micromachined and pressure-actuated for variable-focusing applications. The microlens consists of two thin membranes with reconfigurable shapes: a fluid chamber and the interconnected microchannel. The back focus length tuning range is demonstrated from 35mm to 250mm and zoom ratio of up to seven without any mechanical moving components. Aberration characterization is carried out systematically by the Shack–Hartmann measurements to clarify the potential adverse effect associated with focal length tunability, with particular attention placed on interpretation of the Zernike modes. Experimental results show that spherical mode (Z13) can be significantly degraded from −0.037μm to −0.095μm by injecting DI water of 1.11–4.43μL. A facile and cost-efficient approach has been proposed to compensate spherical aberration based on differential thickness of elastic membranes. The thickness variation for the biconvex microlenses can be manipulated as the difference in deformation contour as well as the resultant surface profile when subjected to uniform applied pressure. Both ZEMAX simulation and experiment are used to validate the design concept and search for the optimal thickness ratio. By injecting the fixed fluid volume of 3.32μL, the optimal thickness ratio of 1:4 can be experimentally obtained and the measured spherical aberration is −0.023μm, or 56% improvement compared with 1:1 thickness ratio of −0.053μm. The proposed microlens is robust and can be used potentially in medical imaging systems, for example, a dynamic environment and adaptive optics. ► A tunable biconvex microlens of 1000μm diameter is micromachined. ► The back focus length tuning range is demonstrated from 35mm to 250mm. ► Zoom ratio of up to seven is achieved without any mechanical moving components. ► A facile design to compensate spherical aberration based on differential thickness. ► Proposed microlens can be used potentially in medical imaging systems. 出版者： Elsevier Ltd 出版日期： 2012-12 出處： Optics and lasers in engineering, 2012-12, Vol.50 (12), p.1677-1682 資源來源： Elsevier ScienceDirect Journals Complete 版權： 2012 識別號： ISSN: 0143-8166 識別號： EISSN: 1873-0302 識別號： DOI: 10.1016/j.optlaseng.2012.07.013
顯示於類別:	[機械工程學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	14	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....