ELECTRICAL-DISCHARGE MACHINING CHARACTERISTICS OF CONDUCTIVE ALUMINA-BASED CERAMICS

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > journal & Dissertation > Item 987654321/27098

Please use this identifier to cite or link to this item: https://ir.lib.ncu.edu.tw/handle/987654321/27098

Title:	ELECTRICAL-DISCHARGE MACHINING CHARACTERISTICS OF CONDUCTIVE ALUMINA-BASED CERAMICS
Authors:	YAN,BH;TSAI,DC
Contributors:	機械工程學系
Keywords:	N/A
Date:	1994
Issue Date:	2010-06-29 18:07:41 (UTC+8)
Publisher:	中央大學
Abstract:	In order to reveal the electrical discharge machining characteristics of electrical conductive alumina based ceramics, a series of EDM tests are carried out. The following main results are obtained. (1) The surface roughness of ceramics machined with negative polarity is larger than that with positive polarity. (2) When machining ceramics with small current, compared with positive polarity, the material removal rate of negative polarity is larger and the electrode wear ratio is smaller. But when machining with large current, the relation is reversed. (3) When machining with short pulse and negative polarity, the recast layer is thinner and almost no crack is observed because of the impact force caused between the workpiece and electrode is larger than positive polarity. (4) Compared with normal EDM, material removal rate machined with orbital motion of an electrode is higher, but the surface roughness and the electrode wear ratio are worse. But when the orbital distance of an electrode increases, the surface roughness and the electrode wear ratio are improved remarkably.
Relation:	JOURNAL OF THE JAPAN INSTITUTE OF METALS
Appears in Collections:	[Graduate Institute of Mechanical Engineering] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	473	View/Open

社群 sharing