English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41961811      線上人數 : 1341
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋

    子類別

    博碩士論文 [2899/2899]
    期刊論文 [897/897]
    考古題 [328/328]
    研究計畫 [67/67]

    社群統計


    近3年內發表的文件: 352(8.40%)
    含全文筆數: 4191(100.00%)

    文件下載次數統計
    下載大於0次: 4191(100.00%)
    下載大於100次: 3700(88.28%)
    檔案下載總次數: 2043992(5.04%)

    最後更新時間: 2024-11-27 14:27

    上傳排行

    資料載入中.....

    下載排行

    資料載入中.....

    RSS Feed RSS Feed
    跳至:
    或輸入年份:
    由新到舊排序 由最舊的開始

    顯示項目2001-2050 / 4191. (共84頁)
    << < 36 37 38 39 40 41 42 43 44 45 > >>
    每頁顯示[10|25|50]項目

    日期題名作者
    2008-07-14 粉末冶金齒輪齒根疲勞強度之研究 王婉茹; Wan-ju Wang
    2008-07-10 具反剋機制系統的隨機過程初步探討 施養奇; Yan-chi Shih
    2008-07-10 失效率與失效機率函數間關係之探討 陳鴻銘; Hong-Ming Chen
    2008-07-10 失效率函數與可靠度呈等差或等比及混合型關係之探討 劉偉彥; Wei-yen Liu
    2008-07-10 高雷諾數低NOx預混弱漩渦噴流燃燒器:紊焰碎形特性定量量測; High-Reynolds-Number Low NOx Premixed Weak-Swirl Jet Burners: Quantitative Measurements of Fractal Characteristics for Turbulent Flames. 楊政憲; Cheng-hsien Yang
    2008-07-10 火花引燃機制與散佈狀燃燒型態之實驗研究; An Experimental Study on Spark Ignition Mechanism and Distributed Combustion Mode 李尚軍; Shang-chun Li
    2008-07-10 新潔淨氫能觸媒熱電產生器:製造、量測與模擬; A New Clean Hydrogen-Catalytic-Thermoelectric Power Generator: Manufacture, Measurement and Simulation 張瑞文; Ray-wen Chang
    2008-07-10 幾何模型最佳投影視角分析; The Best Viewpoint Projection Analysis of Geometric Models 侯嘉琳; Jia-lin Hou
    2008-07-09 在不同氣氛下Al-6Zn-XMg(X=0,2wt%)熱合氧化膜的成長機制; Thermally formed oxide films on Al-6Zn-XMg(X=0,2wt%) alloys heated in different gases 陳諄修; Juen-shiou Chen
    2008-07-09 利用紋理濾除方式於彩色濾光片瑕疵檢測; Color Filter Defect Inspection by Removing Directional Texture 廖育昇; Yu-sheng Liao
    2008-07-09 不同冷卻速率於鎂鋁合金之熱分析研究; Thermal analysis of magnesium-aluminum alloys for different cooling rates 周英哲; Ying-jhe Jhou
    2008-07-09 應用於股骨長骨骨折回復之C-arm影像輔助手術導引系統; C-arm Navigation System for Femoral Shaft Fracture Reduction 陳彥竹; Yen-Chu Chen
    2008-07-09 永磁式同步電動機的電氣參數估測; Parameters Estimation of the Permanent Magnet Synchronous Motor 曾存弘; Tsun-Hung Tseng
    2008-07-09 超音波震盪對熔煉鎂合金晶粒細化之研究; The study of grain refinement for magnesium alloys by using ultasonic vibration 施智仁; Jhih-ren Shih
    2008-07-09 電滲泵之焦耳熱效應分析; Joule Heating Effects of Electroosmotic Pump 劉政廷; Jheng-ting Liou
    2008-07-09 電化學矽加工之研究與分析; The Analysis and Investigation on Silicon Plate by Electrochemical Machining 紀朝傑; Chao-Jie Ji
    2008-07-09 條紋式塗佈暫態過程之觀察; The Investigation of Transient Stripe Coating Process 陶麒鈺; Chi_yu Tao
    2008-07-09 以肌電訊號估測肌力之研究; Isotonic elbow joint torques estimation from surface EMG signal using an artificial neural network model 阮天佑; Tian-You Ruan
    2008-07-09 肢體同動機械手臂系統之設計與研究; Design and Resarch of EMG-based Upper limb Motion Synchronization Robotic Arm System 白鎧綸; Kai-Lung Bai
    2008-07-09 應用奇異值矩陣分解及最佳分區方法於液晶顯示器之Mura缺陷自動檢測; TFT-LCD Mura Defects Automatic Inspection system using Singular Value Decomposition and Optimal division method 郭保鑫; Bao-shin Kuo
    2008-07-09 膝關節局部表面重建研究; A research on surface reconstruction for partial knee surface repairing 蘇文; Vincent So
    2008-07-08 直齒錐形齒輪齒根應力解析計算模式之研究; A study on analytical calculation model for root stresses of straight-toothed conical gears 黃麒; Chi Huang
    2008-07-08 具點接觸型態之歪斜軸錐形齒輪對齒面疲勞破壞之初步研究 許昭祥; Chao-Hsing Hsu
    2008-07-08 設計與製作圓錐平板型生物反應器; Designed and Validated Cone and Plate Bioreactor 王文甫; Wen-fu Wang
    2008-07-08 異質材料(石英/矽)晶圓鍵合之薄膜應力模擬與研究; Dissimilar Material Wafer Bonding - Silicon on Quartz THIM FILMSTRESSES SIMULATION and STUDY 林家慶; Jia-ching Lin
    2008-07-08 靜水壓力式生物反應器之設計與製作; Hydrostatic pressure bioreactor system designed and validated 許峻瑋; Chun-wei Hsu
    2008-07-08 自感式壓電吸振器應用於旋轉雷利夫樑之減振分析; Self-Sensing Piezoelectric Absorbers for Reducing Vibration of a Rotating Rayleigh’s Beam 莊家明; Chia-Ming Chuang
    2008-07-07 以Cz法生長摻鎂鈮酸鋰單晶; MgO doped lithium niobate single crystals were grown by the Czochralski method. 鄭文翔; Wen-Hsiang Cheng
    2008-07-07 平板式輻射狀熱管之研製與性能評估; Fabrication and Performance Evaluation of Flat radial Heat Pipe 潘文勤; Wen-Chin Pan
    2008-07-07 柴式法生長氧化鋁單晶過程最佳化熱流場之分析; Thermal-fluid Analysis during the Sapphire crystal growth process by using the Cz method 陳建宏; Chien-Hung Chen
    2008-07-04 MARC應用於A1050P鋁材之非對稱壓延分析與驗證 賴柏仲; Po-Chung Lai
    2008-07-04 A1050P板材經非對稱壓延之彎曲行為的實驗研究; This experiment of bent appearance at asymmetrical rolling with A1050P specimens 陳遠欣; Yuan-Shin Chen
    2008-07-04 加工參數對 A1050P板材經壓延加工後的曲率變化之實驗研究 ;Experimental research of working parameter effect curvature behavior of rolling aluminum A1050P 江龍; Lung Chiang
    2008-07-04 入口角度對非對稱壓延A1050P鋁材彎曲行為之實驗研究; Experimental research of entry angle effect curvature behavior of asymmetrical rolling aluminum A1050P 詹敏雄; Min-Hsiung Chan
    2008-07-04 順滑模式應用於氣動馬達伺服平台之定位控制; Siding mode control for pneumatic servo system 鄭家昇; Jia-Sheng Jheng
    2008-07-04 手推輪椅虛擬實境系統開發之研究; Development of a Virtual Reality Manual Wheelchair System 謝凱傑; Kai- Jie Sie
    2008-07-01 高性能雙晶銅微結構之電鍍製作研究; Copper Microfeatures with High Twin Density Fabricated by Electroplating 林景崎
    2008-06-30 ZK60鎂合金顯微組織與機械性質研究; Microstructure and mechanical properties of ZK60 magnesium alloy 陳麒任; Chi-Jen Chen
    2008-06-30 添加鈹、鈧之LAZ1110鎂鋰合金經等通道彎角擠製後之微結構及機械性質研究; A study on the Microstructures and Mechanical properties of LAZ1110 Mg-Li alloy containing Sc and Be after Equal Channel Angular Extrusion 劉國政; Guo-Jheng Liou
    2008-06-27 多面幾何模型逆投影分析之研究; Back Projection Analysis of Polyhedral Geometric Models 陳建安; Jian-an Chen
    2008-06-27 儲槽排放過程中間隙氣體對粉顆粒體的影響; The Discharge of Fine Powders in a Silo 許進吉; Chin-Chi Hsu
    2008-06-26 長骨骨折癒合過程之有限元素法模擬; The simulation of the long bone's fracture healing process with finite element method 徐迎娟; Ying-chuan Hsu
    2008-06-26 邊界預力與彎矩對於厚板振動的影響; The effect of vibration for thick plate subject to in-plane force and edge moment 王皓緯; Hao-Wei Wang
    2008-06-26 多機器人合作之行為控制架構設計; Multi-Robot cooperation action selection modle design 曾博廉; Bo-Lian Tzeng
    2008-06-26 鋁輪圈衝擊測試之模擬分析; Modeling for Impact Test of Aluminum Wheels 張維展; Wei-Chan Chang
    2008-06-26 腿骨二維輪廓點資料之三維網格模型重建; 3D STL Model Reconstruction of Leg 2D Contour Point Data 許誌文; Chih-wen Hsu
    2008-06-26 鎂鎳合金儲氫罐在吸放氫作用下之應變分析; Analysis of Wall Strain on the Reaction Vessel of Mg2Ni Alloy During Cyclic Hydriding/Dehydriding Processes 張育豪; Yu-Hao Jhang
    2008-06-26 不同封裝設計對固態氧化物燃料電池堆熱應力之影響; Effect of Sealing Design on the Thermal Stresses in SOFC Stack 黃令豪; Ling-Hao Huang
    2008-06-26 二維CT醫學影像之骨頭輪廓自動擷取; Medical Image Automatically Retrieves The Contours Of Bone Images 陳信豪; Shin-Hao Chen
    2008-06-26 全人工膝關節術後定位系統之發展; To Develop a Positioning System in Total Knee Arthroplasty 戴維利; Wei-li Dai

    顯示項目2001-2050 / 4191. (共84頁)
    << < 36 37 38 39 40 41 42 43 44 45 > >>
    每頁顯示[10|25|50]項目

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明