中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:

Collection

	Electronic Thesis & Dissertation [2899/2899]
	journal & Dissertation [897/897]
	retired tests [328/328]
	Research Project [67/67]

Siblings

	Graduate Institute of opto-Mechatronics [514/514]
	Department of Chemical and Materials Engineering [978/978]
	National Central University Department of Chemical & Materials Engineering [2693/2693]
	International Environment Sustainable Development Program [96/96]
	Department of Civil Engineering [1147/1147]
	Graduate Institute of Civil Engineering [3335/3335]
	Interdisciplinary Program, College of Engineering [9/9]
	International Master Degree Program in Applied Materials Science(IAMS) [9/9]
	Institute of Materials Science and Engineering [666/666]
	Departmant of Mechanical Engineering [1791/1791]
	Graduate Institute of construction engineering [542/542]
	Graduate Institute of Environmental Engineering [1664/1664]
	Energy of Mechatronics [470/470]
	Executive Master of Civil Engineering [633/633]
	Executive Master of Mechanical Engineering [336/336]
	Executive Master of Construction Engineering and Management [174/174]
	Executive Master of Environmental Engineering [349/349]

Community Statistics

	Item counts issued in 3 years: 352(8.40%)
	Items With Fulltext: 4191(100.00%)
Download counts of the item
	Download times greater than 0: 4191(100.00%)
	Download times greater than 100: 3700(88.28%)
	Total Bitstream Download Counts: 2043994(5.04%)

Last Update: 2024-11-27 14:34

Top Upload

Top Download

Recent Submissions

	一種簡易旋轉式LED曝光裝置的設計與實作
	噴嘴外形對超音波輔助噴水效應之探討;Research on the E...
	磁場輔助電化學加工法於不銹鋼陣列微孔拋光之研究;Research on...
	微細片狀電極結合超音波輔助電化學放電加工於石英玻璃加工微槽之研究;In...
	陰離子交換膜水電解單元之傳輸現象分析;Analysis of tran...
	鎳鈦記憶合金電極應用於不鏽鋼彎管內表面電化學拋光之研究;Researc...
	混氣放電線切割加工 N-Type 單晶碳化矽之研究;Research ...
	液體輔助超短脈衝雷射薄石英晶圓微鑽孔研究;Research on Li...
	以超短脈衝雷射內部刻畫技術實現高品質裂面和高效石英晶圓切割探討;Exp...
	基於聚焦成形技術之藍寶石玻璃孔洞自動化量測系統開發;Developme...

Jump to a point in the index:
Or type in a year:

Ordering With Most Recent First

Show Oldest First

Showing items 826-850 of 4191. (168 Page(s) Totally)
<< < 29 30 31 32 33 34 35 36 37 38 > >>
View [10|25|50] records per page

Date	Title	Authors
2018-04-03	107年機械工程研究所固力與設計組(甲組)-動力學-入學考試題	機械工程研究所固力與設計組
2018-04-03	107年機械工程研究所製造與材料組(乙組)-工程數學-入學考試題	機械工程研究所製造與材料組
2018-04-03	107年機械工程研究所製造與材料組(乙組)-材料科學(金屬材料)-入學考試題	機械工程研究所製造與材料組
2018-04-03	107年機械工程研究所製造與材料組(乙組)-機械製造-入學考試題	機械工程研究所製造與材料組
2018-04-03	107年機械工程研究所熱流組(丙組)-流體力學(含熱傳)-入學考試題	機械工程研究所熱流組
2018-04-03	107年機械工程研究所熱流組(丙組)-熱力學-入學考試題	機械工程研究所熱流組
2018-03-29	TiB2對A201鋁合金微結構、機械與鑄造性質之影響;Effect of TiB2 on the mechanical, casting properties and microstructure of A201 alloys	賴璟皜; Lai, Ching-How
2018-03-22	振動床內顆粒體迴流機制的微觀探索與顆粒形狀效應	魏士傑; Wei, Shih-Jie
2018-01-29	三階差速分流式行星齒輪機構傳動誤差與負載分析;Load and Transmission Error Analysis of a Differential Type Three-stage Planetary Gear Drive	莊啓佑; Zhuang, Qi-You
2018-01-29	加壓型氨固態氧化物燃料電池之實驗研究;An Experimental Investigation of Pressurized Ammonia Solid Oxide Fuel Cell	謝昇均; Hsieh, Sheng-Chun
2018-01-29	合成氣固態氧化物燃料電池性能與穩定性量測;Measurements of cell performance and stability for syngas solid oxide fuel cells	張華屹; Chang, Hua-Yi
2018-01-29	利用化學氣相沉積法於規模化合成大面積石墨烯之研究;Scalable chemical vapor deposition method for synthesizing large area graphene	許凱翔; HSU, KAI-HSIANG
2018-01-29	結合雷射直寫與無電鍍技術應用於嵌入式金屬網格透明電極製作;Fabrication of embedded metal-mesh electrode by laser direct write combing with electroless plating	陳正彥; Chen, Zheng-Yan
2018-01-25	標靶治療用超音波影像輔助機械臂 HIFU定位校準;Ultrasound image guided robotic HIFU positioning calibration for targeted therapy	蔣嘉煒; Chiang, Chia-Wei
2018-01-24	Development of A Label-Free Imaging Droplet Sorting System with Machine Learning-Support Vector Machine (SVM)	黃正毅; Huang, Cheng-Yi
2018-01-24	考慮軸承剛性影響下具兩齒差之擺線行星齒輪機構之受載齒面接觸分析;Loaded Tooth Contact Analysis of Cycloid Planetary Gear Drives With Tooth Number Difference of Two Considering Bearing Stiffness	張甯喬; Chang, Ling-Chiao
2018-01-22	影響越南能源消耗及二氧化碳排放之因素：從2007到2012投入產出結構分解分析;Factors Affecting Energy Consumption and CO2 Emissions in Vietnam: an Input-Output Analysis from 2007 to 2012	拉玫方; Mai Phuong, La
2018-01-17	應用於模流分析之CAD模型特徵辨識與實體網格品質提升之研究	王明暄; Wang, Ming-Hsuan
2018-01-12	熔融沉積成型技術之路徑規劃與提升製造效率研究;A Research of Path Planning and Improvement of Manufacturing Efficiency for Fused Deposition Manufacturing Technology	曾竣煌; Tseng, Chin-Huang
2018-01-09	以冷凍成型積層製造及固態水支撐製程製作水性生物可降解型聚胺酯與殼聚醣支架之實驗與分析;Experiment and Analysis on Waterborne Biodegradable Polyurethane and Chitosan Scaffold Fabricated by Frozen-Form Additive Manufacturing and Sacrificial Process using Phase Change of Water	楊泓璟; Yang, Hung-Ching
2018-01-08	-;DEVELOPMENT OF OVERLAPPING REMOVAL ALGORITHM ON 3D FRACTURED BONE MODEL FOR THE ASSEMBLY APPLICATION IN 3D PRINTING	塔爾瑪; BINTARA, REDYARSA DHARMA
2017-12-13	高溫高壓預混異辛烷火焰之層流與紊流燃燒速度量測與正規化分析	于德維; Yu, De-Wei
2017-11-29	以二相流離散元素電腦模擬與物理實驗探討液體中顆粒體崩塌行為	陳定偉; Chen, Ting-Wei
2017-11-23	鹽水液滴在常壓環境下乾燥過程的建模與模擬	吳帛軒; WU, PO-HSUAN
2017-11-21	一般顆粒體與可破裂顆粒體在單向度束制壓縮作用下之力學行為	陳彥澈; Chen, Yen-Tse