Backstepping sliding mode tracking control of a vane-type air motor X-Y table motion system

NCUIR > Engineering College > Departmant of Mechanical Engineering > journal & Dissertation > Item 987654321/50199

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/50199

Title:	Backstepping sliding mode tracking control of a vane-type air motor X-Y table motion system
Authors:	Lu,CH;Hwang,YR;Shen,YT
Contributors:	機械工程學系
Keywords:	POSITION CONTROL;DESIGN
Date:	2011
Issue Date:	2012-03-27 17:06:15 (UTC+8)
Publisher:	國立中央大學
Abstract:	Air motors are increasingly being used in pneumatic related industries because of their advantages of low operating cost and low maintenance. The DSP controller and the backstepping sliding mode control method were utilized in this study to control an X-Y pneumatic table for tracking trajectory. Due to the effects of the compressibility of air, friction between the motor and ball screw table and the dead-zone effect caused by the proportional valve, the system will yield different responses even with the same inlet pressure and will chatter at low speed. Hence under certain conditions, this method of backstepping sliding mode control can be applied to achieve better results than with the PID controller, such as for tracking circle error and tracking error of the two axes. According to the results, a steady-state error of 0.5 mu m can be achieved. The proposed method of backstepping sliding mode control can accomplish accurate tracking circle trajectory performance, offering an improvement in the tracking error of more than 50% over that of the PID controller. (C) 2010 ISA. Published by Elsevier Ltd. All rights reserved.
Relation:	ISA TRANSACTIONS
Appears in Collections:	[Departmant of Mechanical Engineering ] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	538	View/Open

社群 sharing

Loading...