Backstepping sliding mode tracking control of a vane-type air motor X-Y table motion system

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50199

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50199

题名:	Backstepping sliding mode tracking control of a vane-type air motor X-Y table motion system
作者:	Lu,CH;Hwang,YR;Shen,YT
贡献者:	機械工程學系
关键词:	POSITION CONTROL;DESIGN
日期:	2011
上传时间:	2012-03-27 17:06:15 (UTC+8)
出版者:	國立中央大學
摘要:	Air motors are increasingly being used in pneumatic related industries because of their advantages of low operating cost and low maintenance. The DSP controller and the backstepping sliding mode control method were utilized in this study to control an X-Y pneumatic table for tracking trajectory. Due to the effects of the compressibility of air, friction between the motor and ball screw table and the dead-zone effect caused by the proportional valve, the system will yield different responses even with the same inlet pressure and will chatter at low speed. Hence under certain conditions, this method of backstepping sliding mode control can be applied to achieve better results than with the PID controller, such as for tracking circle error and tracking error of the two axes. According to the results, a steady-state error of 0.5 mu m can be achieved. The proposed method of backstepping sliding mode control can accomplish accurate tracking circle trajectory performance, offering an improvement in the tracking error of more than 50% over that of the PID controller. (C) 2010 ISA. Published by Elsevier Ltd. All rights reserved.
關聯:	ISA TRANSACTIONS
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	534	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing