Hardware Implementation of EMD Using DSP and FPGA for Online Signal Processing

NCU Institutional Repository > 資訊電機學院 > 電機工程學系 > 期刊論文 > Item 987654321/52070

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/52070

题名:	Hardware Implementation of EMD Using DSP and FPGA for Online Signal Processing
作者:	Lee,MH;Shyu,KK;Lee,PL;Huang,CM;Chiu,YJ
贡献者:	電機工程學系
关键词:	EMPIRICAL-MODE DECOMPOSITION;FAULT-DIAGNOSIS;ECG
日期:	2011
上传时间:	2012-03-28 10:14:42 (UTC+8)
出版者:	國立中央大學
摘要:	This paper combines a digital signal processor (DSP) and a field programmable gate array (FPGA) to realize the online empirical mode decomposition (EMD)-based signal processing system. The EMD algorithm is a novel signal analysis technique, decomposing signals into a series of intrinsic mode functions. First, the EMD algorithm is implemented in the DSP, named the EMD processor, which has the ability to eliminate noise from the original signal. Next, in order to process the online sequential signal, this paper proposes and implements pipeline and data transfer controllers in the FPGA, called the data processing flow processor. Then, the data processing flow processor coordinates the EMD processor, analog-to-digital converter, and digital-to-analog converter module boards. Finally, this paper presents a prototype of the online EMD-based electrocardiogram denoise system to verify the features of the proposed architecture. The emulations and experimental results demonstrate the effectiveness of the presented system as expected.
關聯:	IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
显示于类别:	[電機工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	470	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing