中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/53896
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78728/78728 (100%)
造访人次 : 34349522      在线人数 : 817
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/53896


    题名: 泡生法生長大尺寸氧化鋁單晶降溫過程中晶體熱場及熱應力分析;Numerical analysis of thermal  stress of sapphire crystal cooling by the Kyropoulos method
    作者: 闕宜萱;Chiue,Yi-shiuan
    贡献者: 機械工程研究所
    关键词: 熱應力;泡生法;氧化鋁單晶;sapphire;thermal stress;KY
    日期: 2012-07-30
    上传时间: 2012-09-11 18:18:48 (UTC+8)
    出版者: 國立中央大學
    摘要: KY法生長氧化鋁單晶過程中,經常出現晶體破裂情形,這是由於在KY爐生長藍寶石過程裡,藍寶石晶體生長環境溫度約為2323K左右,整顆晶體生長完成後將在爐體內降溫至室溫後開爐取出,其劇烈的溫度變化使得晶體在降溫過程中會產生熱應力,導致晶體破裂。為了提升藍寶石晶體的經濟效益,必須了解KY長晶爐內部的熱傳及晶體熱應力場情形。  由於晶體生長過程無法直接觀察量測長晶爐內之情況,本研究使用有限元素法COMSOL軟體模擬暫態二維軸對稱之模型,模擬晶體與坩堝完全不相黏、晶體與坩堝底部相黏以及晶體與坩堝部分側邊和底部相黏等三種晶體與坩堝接觸情況,其模擬結果呈現當晶體與與坩堝完全不相黏時,其熱應力完全由晶體內部溫梯造成,最大值約為107並未達到藍寶石晶體破裂極限,因此晶體不會破裂;晶體與坩堝底部相黏時,所產生的熱應力主因為晶體和乾堝熱膨脹係數不一樣造成晶體收縮時受到坩堝拉扯的力,其最大值約為109,超過藍寶石晶體的破裂極限,晶體會從熱應力集中處產生破裂現象。The cracks that often appear in sapphire crystal during the cooling process in a Kyropoulos furnace after growth may be induced by higher thermal stress due to thermal inhomogeneity in the crystal. This happens very often in the growth of larger sapphire crystals. How to improve this is the key to improving the quality of the sapphire crystal. In this study, a numerical computation is performed to predict the thermal and stress history during the cooling process in a Kyropoulos furnace. The thermal distribution during the cooling process is controlled by the cooling and power reduction processes. Since the sapphire crystal is semitransparent, radiative heat transfer plays an important role at higher furnace temperatures. However, this effect is less significant when the furnace temperature decreases. The thermal and stress distributions in the crystal during the process are significantly affected by the internal radiative heat transfer. In this study, we simulate about three cases, ⅰ) crystal and crucible completely unsticky, ⅱ)only bottom of the crystal and the crucible are sticky, and the results show that the crystal don’t crack when crystal and crucible completely unsticky, the stress is caused entirely by the internal temperature gradient of crystal. When the crystal sticky with crucible, thermal stress generated by the coefficient of thermal expansion of crystals and crucible are different, the maximum value of thermal is approximately 109(Pa), exceed the breakdown limit of sapphire crystal, so the crystal crack. If the sticky area is more, then the thermal stress concentration is more, cracks of sapphire is more serious.
    显示于类别:[機械工程研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML587检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明