中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/91916
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41659739      線上人數 : 1866
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/91916


    題名: 具三苯胺衍生物之電洞傳輸層材料開發
    作者: 吳佩玲;WU, PEI-LING
    貢獻者: 化學學系
    關鍵詞: 三苯胺;電洞傳輸層;錫鈣鈦礦太陽能電池
    日期: 2023-06-28
    上傳時間: 2024-09-19 14:42:34 (UTC+8)
    出版者: 國立中央大學
    摘要: 本研究主要以三苯胺 (Triarylamine, TAA) 為核心,開發出數種有機光電材料。首先於核心一端接上推電子基團為末端帶有甲氧基的三苯胺 (TPA) ;另一端接上拉電子基氰乙酸乙烯基 (Ethyl cyanoacetate) 和丙二腈 (Malononitrile) 作為錨定基團,再以加入噻吩來延長共軛系統及外掛不同數量的推電子基團,以調控材料能階及增加分子內電荷轉移,製備出六種小分子材料: TPA-MN (1) 、 TPA-CA (1a)、TPA-T-MN (2) 、 TPA-T-CA (2a)、3TPA-MN (3) 及 3TPA-CA (3a)。最後將這一系列材料應用在錫鈣鈦礦太陽能電池中的電洞傳輸層上,並以自組裝 (Self-assembly) 的方式製成元件,目前還在優化元件條件中,但其中 TPA-T-MN(2) 及 3TPA-MN (3) 效率已有達到 7%,與使用自組裝方法製造的錫鈣鈦礦太陽能電池的最高報導效率 8.3% 相比,已具有良好的初始測試結果,期望後續優化能有進一步地提升。;In this study, several organic photoelectronic materials were developed primarily based on triarylamine (TAA). One end of the core was functionalized with a methoxyl group as a terminal electron-donating group of triphenylamine (TPA). The other end was modified with electron-withdrawing groups, ethyl cyanoacetate and malononitrile, as anchoring groups. Additionally, thiophene units were incorporated to extend the conjugation length and various numbers of electron-pushing groups were attached to regulate the energy level of the materials and enhance intramolecular charge transfer effect. As a result, six small molecule materials were synthesized: TPA-MN (1), TPA-CA (1a), TPA-T-MN (2), TPA-T-CA (2a), 3TPA-MN (3), and 3TPA-CA (3a). Finally, this series were applied as hole transporting materials in Tin-based perovskite solar cells and fabricated into devices using a self-assembly process. Currently, the device conditions are still being optimized. However, TPA-T-MN (2) and 3TPA-MN (3) have both already achieved efficiencies of 7%. Compared to the highest reported efficiency of 8.3% for Tin-based perovskite solar cells fabricated using a self-assembly method, these materials have shown good performance in current test. These series are under optimizing. After improvement, their performances are expected for better efficiencies.
    顯示於類別:[化學研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML16檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明