中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/93411
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78852/78852 (100%)
造访人次 : 36970430      在线人数 : 1437
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/93411


    题名: 以原子層沉積披覆層及飛秒雷射退火對氮化矽微環形共振腔進行表面改質研究;Surface Modification of Silicon Nitride Micro Ring Resonator by Atomic Layer Deposition Coating and Femtosecond Laser Annealing
    作者: 侯念霖;Hou, Nien-Lin
    贡献者: 光電科學與工程學系
    关键词: 微環形共振腔;色散調製;原子層沉積;飛秒雷射退火;矽光子;Micro-ring resonator;Dispersion modulation;Atomic layer deposition;Femtosecond laser anneal;Silicon photonics
    日期: 2023-11-22
    上传时间: 2024-03-05 17:25:11 (UTC+8)
    出版者: 國立中央大學
    摘要: 隨著技術的不斷進步,矽光子學正在不斷發展和演進,此技術的優勢在與能與傳統CMOS半導體製程實現光子與電子元件的高度集成。而群速度色散對於高速光通訊、數據傳輸和非線性光學方面舉足輕重。因此本論文首先使用有限元法(FEM)對我們所需要的波導結構進行色散模擬,第一部分,我們透過模擬在不同高度及不同寬度的情況下,觀察幾何形狀調製色散的利弊;第二部分,在確認了氮化矽波導幾何形狀後,使用不同披覆層材料並在上方逐漸增加披覆層的厚度,模擬其沉積色散調製後的變化。接著我們介紹微環形共振腔的製程步驟,並且驗證了原子層沉積不會對波導造成額外損耗及品質因子產生影響。
    在色散量測上,我們使用了二氧化鉿(HfO2)及氧化鋁(Al2O3)兩種材料披覆在氮化矽微環形共振腔上,透過原子層沉積能精確控制沉積厚度,能精準的調製色散。在沉積了二氧化鉿披覆層後,我們能將氮化矽波導的色散從-274 ps/ nm-km調製到-205 ps/nm-km ;除此之外,在沉積氧化鋁披覆層後,能將波導色散從-213 ps/nm-km調製到46 ps/nm-km,實驗結果顯示:使用氧化鋁披覆層能將波導色散調製到近零色散,並且在增加披覆層厚度後,更能將正常色散調製為異常色散,這意味著我們能更靈活的進行色散調製。
    最後我們也研究了如何提高微環形共振腔的品質,透過飛秒雷射對微環形共振腔進行局部退火,其中也使用拉曼(Raman)光譜及原子力顯微鏡(Atomic force microscope)來尋找對氮化矽薄膜最有幫助的退火功率,我們發現特定功率對於微環形共振腔的品質因子提升有幫助,幅度約為1.3倍。
    本論文透過雷射退火來提高微環形共腔的品質,並且提供了不會對波導增加額外損耗、精準及靈活調製色散的方式。
    ;With the continuous advancement of technology, silicon photonics is undergoing constant development and evolution. One of the key advantages of this technology lies in the high integration of both photonic and electronic components within the traditional CMOS semiconductor fabrication process. Group velocity dispersion plays a crucial role in high-speed optical communication, data transmission, and nonlinear optics. Therefore, in this thesis, we first conducted dispersion simulations using finite element method on the required waveguide structures. In the first part, we observed the pros and cons of geometric modulation of dispersion under different heights and widths. In the second part, after confirming the geometry of the silicon nitride waveguide, we simulated the variation in deposited dispersion modulation by using different coating materials and gradually increasing the thickness of the coating layer.
    Next, we introduced the fabrication steps of the micro-ring resonator and verified that atomic layer deposition does not cause additional losses or affect the quality factor of the waveguide. For dispersion measurement, we used two materials, Hafnium Dioxide (HfO2) and Aluminum Oxide (Al2O3), coated on the silicon nitride micro-ring resonator.
    Through atomic layer deposition, we could precisely control the deposition thickness and accurately modulate the dispersion. With the deposition of Hafnium Dioxide coating, we were able to modulate the dispersion of the silicon nitride waveguide from -274 ps/nm km to -205 ps/nm-km. Furthermore, with the deposition of Aluminum Oxide coating, we could modulate the waveguide dispersion from -213 ps/nm-km to 46 ps/nm-km. The experimental results showed that using Aluminum Oxide coating could tune the waveguide dispersion to near-zero dispersion. Additionally, increasing the coating thickness could further transform normal dispersion into anomalous dispersion, indicating greater flexibility in dispersion tuning.
    Finally, we investigated methods to enhance the quality of the micro-ring resonator. Through femtosecond laser annealing, we conducted localized annealing on the micro ring resonator. Raman spectroscopy and Atomic Force Microscope were utilized to identify the annealing power most beneficial to the silicon nitride film. We found that
    specific power levels contributed to a 1.3-fold improvement in the quality factor of the micro-ring resonator.
    This thesis demonstrates the enhancement of micro-ring resonator quality through laser annealing, providing a means of precise and flexible dispersion modulation without
    introducing additional losses to the waveguide.
    显示于类别:[光電科學研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML55检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明