English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42118532      線上人數 : 942
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/94893


    題名: 超強耦合共振腔之光致發光研究;Photoluminescence study of Ultra-strongly coupled cavity
    作者: 黃明鴻;Huang, Ming-Hung
    貢獻者: 光電科學與工程學系
    關鍵詞: 超強耦合;偏極子;有機材料;Ultra-strongly coupled;polariton;Organic material
    日期: 2024-06-26
    上傳時間: 2024-10-09 15:35:48 (UTC+8)
    出版者: 國立中央大學
    摘要: 在本論文中,我們選用具有雙吸收峰的有機材料F8BT作為共振腔的主動層,建構出超強耦合共振腔架構。在該架構中,主動層同時擔任光子源以及激子源,這樣的設計使得我們能夠製作出具有更強耦合強度的元件,進而對其背後的物理現象進行詳細的探討。在共振腔中的光子與激子進行耦合作用時,會產生一種由光和物質所組成並有玻色子特性的混成態粒子,稱為偏極子。在具有雙吸收峰主動層的共振腔中,耦合作用會導致新的能量分支的形成,這些分支分別稱為上支、中支和下支。當共振腔中光子的能態與激子能態相同時,上支與下支之間的能量差被稱為拉比分裂。若拉比分裂大小超過激子能量的20 %時,則稱該共振腔達到了超強耦合。
    在實驗開始前,我們會使用光學薄膜設計軟體Macleod來模擬各膜層的厚度,確保下支的位置正確對應到F8BT的光致發光PL位置,並且模擬出DBR布拉格反射鏡中的高低折射率材料的厚度。我們使用不同反射鏡的共振腔去探討其對耦合特性的影響,其中DBR布拉格反射鏡中心波長是設計在515 nm,高反射率頻寬僅包到F8BT的單吸收峰。最後結果得出不同反射鏡的共振腔均可以達到30 %附近的耦合強度,達到了超強耦合。使用不同功率的激發光源去激發DBR布拉格反射鏡共振腔,可以發現到隨著功率的增加,光譜上的能量會往低角度聚集,產生與雷射相同的特性。
    ;In this paper ,we selected the organic material F8BT,which has dual absorption peaks,as the active layer of the resonant cavity to construct a Ultra-strongly coupled cavity structure. In this setup , the active layer functions as both the photon and exciton source . This design allows us to fabricate devices with increased coupling strength,enabling a detailed investigation of the underlying physical phenomena . When photons and excitons within the resonator couple , they from a hybrid state particle composed of light and matter , exhibiting bosonic characteristics , known as a polariton . In resonators with a dual-peak active layer , the coupling leads to the formation of new energy branches , referred to as the upper、middle and lower branches . When the photon and exciton energy states in the resonator align , the energy difference between the upper and lower branches is called the Rabi splitting . If the Rabi splitting exceeds 20 % of the exciton energy , the resonator is considered to have achieved strong coupling .
    Before the experiment begins , we utilize the optical thin film design software Macleod to simulate the thickness of each layer , ensuring the lower branch correctly aligns with the photoluminescence (PL) position of F8BT , and to model the thicknesses of high and low refractive index materials in the Distributed Bragg Reflector (DBR) mirrors . We use resonators with different mirrors to explore their effects on coupling characteristics , where the central wavelength of the DBR mirrors is designed at 515 nm , and the high reflectance bandwidth only covers the single absorption peak of F8BT . The results show that resonators with different mirrors can achieve a coupling strength of about 30 % , indicating strong coupling . By exciting the DBR resonators with light sources of varying powers , we observe that as power increases , the energy on the spectrum concentrates towards lower angles , exhibiting characteristics similar to those of a laser .
    顯示於類別:[光電科學研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML10檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明