中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/68111
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41684411      線上人數 : 2588
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/68111


    題名: 越庫作業之理貨區相關作業問題探討
    作者: 劉嘉珮;Liu,Chia-Pei
    貢獻者: 工業管理研究所
    關鍵詞: 越庫作業;貨車訂單選取法則;理貨區儲存格指派法則;理貨區服務法則;cross docking;order selection rule;cell of tally area assigning rule;tally area serving rule
    日期: 2015-07-24
    上傳時間: 2015-09-23 10:45:00 (UTC+8)
    出版者: 國立中央大學
    摘要: 越庫作業為物流作業中的一種策略,是指在越庫碼頭整合不同供應商的整車貨物後,根據訂單需求將各品項加以拆解、分類及堆放,最後裝上前來載取的卡車,送往顧客所要求的交貨地點;其中,所有品項均不需進貨檢驗,也不需儲存於物流中心之倉庫。越庫作業可省下入庫、儲存等作業,因此特別適合需要快速處理的緊急訂單,且適合將商品直接送到零售商的情況。
    本研究針對使用配銷商型越庫(Distributor Cross Docking)之物流中心,從進貨貨車到達,至出貨貨車送出之作業流程。本研究主要探討理貨區的作業問題,分別為貨車訂單選取問題、理貨區儲存格指派問題與理貨區服務問題,並分別提出相對應的貨車訂單選取法則、理貨區儲存格指派法則與理貨區服務法則。最後利用模擬實驗所得到的數據,針對總系統執行時間、總理貨旅行距離、準時率、與總延後時間這四種績效指標下,找出何種組合對作業效率有較顯著的提升。
    ;Cross docking is a strategy of logistics operations which means that when the receiving shipment of inbound truck, according to the requirement from orders, the operators separate, sort, and place the items immediately. Finally, they collect these items on the outbound truck and delivery to the location where customer needs. All the items do not need to do examine and store in the distribution center. Because cross docking does not have the cost of bringing the product items into the warehouse and storing them, it is especially for emergency order that need to handle and delivery to the retailers as soon as possible.
    This research focuses on the issue of Distributor Cross Docking, from the inbound truck arrives to the outbound truck leaves, and discusses about the operation on it. It is mainly discuss about the operation on tally area, includes order selection problem, cell of tally area assigning problem, and tally area serving problem, and respectively proposes order selection rule, cell of tally area assigning rule, and tally area serving rule. Finally, in this environment, comparing the data by On-time Delivery Rate, Total Tardiness, Total System Time, and Total Picking Distance, which were obtained by simulation experiments, to know which combination of the rules will performs better.
    顯示於類別:[工業管理研究所 ] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML592檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明