中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/69280
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78728/78728 (100%)
造访人次 : 33554993      在线人数 : 849
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/69280


    题名: 以快速熱熔異質磊晶成長法製作鍺矽累增型光偵測器;Silicon/Germanium Heterojunction Avalanche Photodetector by Rapid-Melting-Growth Technique
    作者: 周晉賢;Chou,Chin-hsien
    贡献者: 電機工程學系
    关键词: 矽鍺;累增型光偵測器;快速熱熔;Silicon/Germanium;Avalanche Photodetector;Rapid-Melting-Growth
    日期: 2015-11-11
    上传时间: 2016-01-05 18:24:50 (UTC+8)
    出版者: 國立中央大學
    摘要: 近年來將鍺整合於矽基板上製做成電子元件與光電元件已逐漸成為趨勢,
    利用鍺的高吸收係數、高電子電洞遷移率以及窄能帶的優點;矽的高電離係數,易解離出新的電子電洞對可做為累增型光偵測器的增益層,且可整合在CMOS製程上。而矽鍺之間有著4.2%的晶格不匹配其整合上有一定的難度。一般將鍺磊晶在矽基板的方法主要是使用昂貴的高真空磊晶機台如分子束磊晶(MBE)、超高真空化學氣相沉積(UHVCVD)…等等,以上機台製程上都非常昂貴且成長速度慢。
    本論文使用快速熱熔融磊晶成長法製作單晶鍺,較一般高真空機台更簡單快速且可降低成本。在SOI 基板上進行兩次快速熱熔融磊晶成長法,第一層為50nm的鍺緩衝層;第二層為500 nm 的鍺吸收層,第一層的緩衝層能夠侷限鍺矽介面所產生的差排且可作為第二層鍺的晶種點,成長為高品質的鍺吸收層,並利用TEM、SEM 及Raman 光譜進行材料分析。最後製做為分離式吸收、電荷、累增層之鍺矽光測器,並量測其光暗電流及光響應度。;Recently, silicon(Si)-based electronics integrated with germanium(Ge) are widely adopted due to the fact that Ge has a narrow band gap as absorption material for infrared wavelength and CMOS-compatible process, while Si has a favorable ionization coefficient ratio as avalanche multiplication material. However, it’s difficult to grow Ge on Si because of the large lattice mismatch (4.2%) between Si and Ge.Generally, epitaxial growth of Ge on Si relies on ultra-high vacuum chemical vapor deposition, which was expensive and time-consuming.
    In this report, we used rapid-melting-growth method to grown high-quality Ge on SOI (silicon-on-insulator), and then we can obtain a high-quality Ge absorption layer. Defect analysis was conducted by TEM, SEM and Raman Spectrometer.Furthermore, the SACM Ge/Si avalanche photodetector by rapid-melting-growth was fabricated and measured I-V characteristics of the fabricated device were studied.
    显示于类别:[電機工程研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML438检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明