中大機構典藏-National Central University (Taiwan) Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/9317
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 65317/65317 (100%)
造访人次 : 21331306      在线人数 : 201
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/9317


    题名: 增強型異質結構高速移導率電晶體大信號模型之建立及其在微波放大器之應用;A Large-signal Mode for E-PHEMT and It Application in Microwave Amplifier Design
    作者: 王志偉;Zhi-Wei Wang
    贡献者: 電機工程研究所
    关键词: 異質結構場效電晶體;砷化鎵;小信號模型;大信號模型;放大器;GaAs;Small-signal model;Large-signal model;E-PHEMT;Amplifier
    日期: 2002-06-17
    上传时间: 2009-09-22 11:45:17 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 隨著微波技術的日趨重要,對主動元件的要求也愈來愈高,而傳統砷化鎵金屬-半導體電晶體(MESFET)在功率上的表現已不敷使用。異質結構高速場效電晶體(HEMT)、異質接面雙載子電晶體(HBT)在高頻電路的角色愈來愈顯重要。本論文是以增強型異質結構高速移導率電晶體(enhancement-mode HEMT)元件特性探討與模型化技術為主。 本論文首先討論異質結構高速場效電晶體的工作原理,探討元件的非線性特性,包括功率增益壓縮、諧波失真等。並利用Cold FET等量測方法萃取元件內外部等效電路參數以建立小訊號模型,對內部本質元件的非線性特性加以分析。之後,結合電壓-電流方程式以及非線性電阻、電容方程式,建立元件之大信號模型,並與量測之直流、高頻功率特性及線性度作比較。最後,我們將大信號模型實際用於電路設計,設計一2.4GHz微波放大器。 In this thesis,the device characteristics and device modeling technologies of enhancement-mode pHEMTs are investigated. Firstly, the device physics and non-linear characteristics of enhancement-mode pHEMTs are studied, including gain compression and harmoic distortion. By cold-FET measurement and Yang-Long dc measurement, the extrinsic elements of small-signal model can be estimated accurately. The other intrinsic parameters of small-signal can be determined based on the matrix transformation with the on wafer measured S-parameters.The intrinsic model elements, such as Cgs, Cgd, Cds, Rds, Gm,τ and Ri can be extracted under different Vds and Vgs bias points. In this study we propose a modified large-signal model for enhancement-mode pHEMTs, which is based on the conventional Curtice model. The modified large-signal model is based on the structure of Curtice model. In order to take the device non-linear behaviors into consideration, instead of using traditional junction capacitances (Cgs, Cgd), channel resistance (Ri), and output resistance (Rds), we propose suitable non-linear equations to describe these elements, which are the functions of Vgs and Vds. We also examine the accuracy of the large-signal model. Using scalable parasitic components attached to the modified large-signal model, a completed RF large-signal model covering various gate-widths can correctly predict the device’s dc and rf characteristics. Using thise model, a 2.4 GHz microwave amplifier was designed and tested.
    显示于类别:[電機工程研究所] 博碩士論文

    文件中的档案:

    档案 大小格式浏览次数
    0KbUnknown959检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈  - 隱私權政策聲明