English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 40145557      線上人數 : 167
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋

    子類別

    期刊論文 [199/199]
    研究計畫 [1439/1439]
    考古題 [153/153]

    社群統計


    近3年內發表的文件: 149(8.32%)
    含全文筆數: 1791(100.00%)

    文件下載次數統計
    下載大於0次: 1791(100.00%)
    下載大於100次: 1586(88.55%)
    檔案下載總次數: 496980(1.25%)

    最後更新時間: 2024-10-13 08:43

    上傳排行

    資料載入中.....

    下載排行

    資料載入中.....

    RSS Feed RSS Feed
    跳至:
    或輸入年份:
    由新到舊排序 由最舊的開始

    顯示項目1-50 / 1791. (共36頁)
    1 2 3 4 5 6 7 8 9 10 > >>
    每頁顯示[10|25|50]項目

    日期題名作者
    2024-09-27 AI地震預警系統之研究;Study of Earthquake Early Warning System by Ai Methods 黃以玫
    2024-09-27 內外輪廓撒點間距不同之IC CAD模型四邊形網格自動建構技術發展;Development of Automatic Quadratic Meshing Technique for Unequal Spreading Interval on Outer and Inner Contours of Ic Cad Models 賴景義
    2024-09-27 半導體製程氫氣回收與純化裝置關鍵零組件性能評估研究;Performance Evaluation of the Key Component of Hydrogen Recovery and Purification Device for Semiconductor Fabrication Process 陳震宇
    2024-09-27 羽球運動訓練之智慧輔助系統-子計畫三:基於AI視覺的姿態分析於羽球運動之訓練輔助;Ai Vision-Based Athlete Pose Analysis for Training Assistance in Badminton 陳翔傑; 黃相瑋
    2024-09-27 低成本質子交換膜燃料電池關鍵零組件與電池堆研發研究;Research and Development of Key Component and Stack for Low Cost Pemfcs 陳震宇
    2024-09-27 低活化抗輻射材料之熔煉研製—應用於磁約束高溫電漿研究反應爐結構材料;Melting and Development of Low-Activation Radiation-Resistant Materials—Applied to Magnetically Confined High-Temperature Plasma Research Reactor Structural Materials 曾有志
    2024-09-27 形成暫時性異質接面在半導體基板正表面以強化其背面電化學反應之研究;Research on Forming Temporary Heterogeneous Interfaces on the Front-Side Surface of Semiconductor Substrates to Enhance Electrochemical Processes on the Back-Side Surface 李天錫
    2024-09-27 扭力及定位伺服雙模式伺服機開發;Development of Dual-Mode Servo for Torque and Positioning Servo 江士標
    2024-09-27 具5G通訊及高精密定位之AI協作機器人技術開發與裝配產線實現-具5G通訊及高精密定位之AI協作機器人技術開發與裝配產線實現( IV );Development of High-Precision Ai Collaborative Robot with 5g Communication for Industrial Assembly Line( Iv ) 董必正; 林志光; 林錦德; 陳怡呈
    2024-09-27 具人工智能安全與檢測感知能力之高功能基板精密複合加工系統研發-具人工智能安全與檢測感知能力之高功能基板精密複合加工系統研發( IV );Development of an Information-Security, Artificial-Intelligence and Detection-Perception Smart Fabrication System for Precision Hybrid Machining of High-Performance Substrates( Iv ) 何正榮; 董必正; 吳曉光; 林志光; 李安謙
    2024-09-27 定子磁場極座標強度領先角雙迴路馬達定位驅動器;Stator Magnetic Field Pole Coordinate Dual-Loop Motor Positioning Drive Controller 江士標
    2024-09-27 股骨復位手術用模塊化機械手機構設計;Design of a Modular Robotic System for Bone Reduction Surgery 伊泰龍
    2024-09-27 金屬陶瓷複合材料表面電漿拋光開發應用於小行星探測機之發動機電網支撐環;Ceramic–Metal Composites Produced by Surface Plasma Polishing for Engine Grid Supprt Ring in Spacecraft 李雄
    2024-09-27 歪斜軸傳動之圓柱型蝸桿、雙包絡蝸桿及錐蝸桿之動力刮削製造與刀具設計;Manufacturing and Cutter Design of Cylindrical, Double-Enveloping, and Spiroid Worms Used in Skew-Axis Transmission by Power Skiving 陳怡呈
    2024-09-27 特徵選擇方法和機器學習應用於RF氮化鋁薄膜製造之原位光譜診斷系統;Validation of an In-Situ Oes Spectral Diagnostic System for Rf Aluminum Thin Film Manufacturing via Feature Selection Methods and Machine Learning 傅尹坤
    2024-09-27 疲勞裂縫成長預測模式之比較分析-以積層製造17-4 PH不銹鋼為例;Comparative Analysis of Fatigue Crack Growth Prediction Models - Take Additive Manufactured 17-4 Ph Stainless Steel as an Example 黃俊仁
    2024-09-27 航空用鋁合金板材淬火殘留應力與機械消除之有限元素及人工智慧預測模型研究;Integrating Finite Element Method and Artificial Intelligence for Predictive Modeling of Residual Stress and Mechanical Relief in Aerospace Aluminum Alloy Plates after Quenching 林志光
    2024-09-27 骨整合義肢術後評估系統及步態研究;Study on Osseointegration Assessment System and Gait Analysis for Patients with Osseointegrated Prosthetic Limbs 潘敏俊; 張智雅
    2024-09-27 高性能變導程雙螺桿壓縮機之轉子動平衡設計及熱流性能計算關鍵技術研發;Technological Development of Rotor Dynamic Balance Design and Thermo-Fluid Performance Calculation for High-Performance Variable-Lead Twin-Screw Compressors 吳育仁
    2024-09-27 高效能微型渦卷壓縮機轉子之電化學加工技術研發;Development of Electrochemical Machining Technology for High-Efficiency Micro Scroll Compressor Rotors 吳育仁; 洪榮洲
    2024-09-27 高精度、高頻石英振盪器設計與關鍵製程技術研發;Exploration and Advancement in the Design and Key Fabrication Technologies of High-Precision, High-Frequency Quartz Oscillators 何正榮; 黃以玫; 崔海平; 林錦德; 董必正; 林志光
    2024-09-27 高靈敏度CMOS-MEMS勞倫茲力磁力計之開發;Development of Highly Sensitive Cmos-Mems Lorentz Force Magnetometer 陳世叡
    2024-09-27 基於動載齒面分析結果之諧波齒輪齒面強力刮削修整技術研發;Technological Development of Power Skiving Tooth Surface Modification for Harmonic Gear Based on Dynamic Load Analysis 吳育仁
    2024-09-27 理論解析,數值計算與實驗量測探討平板耦合流體受水下衝擊波之動態行為與反算偵測應用(II);Theoretical Analysis, Numerical Simulation and Experimental Measurement for Transient Behaviors of Plates Coupled with Fluid Actuated by Underwater Explosion Wave and Inverse Detection(II) 廖展誼
    2024-09-27 陰離子交換膜電解產氫核心技術開發研究;Key Technology Development of Anion Exchange Membrane Electrolysis Hydrogen Production 陳震宇
    2024-09-27 創新連續創成內旋刮削螺桿加工法之理論模型及切削實驗建置;Theoretical Modelling and Machining Experimentation for Innovative Continuous-Generating Screw Internal-Skiving Process 吳育仁
    2024-09-27 結合動態模式分解及本徵正交分解之資料驅動降階模型開發;Integration of Dynamic Mode Decomposition with Proper Orthogonal Decomposition for Data-Driven Reduced-Order Modeling 邱德耀
    2024-09-27 解析高熵合金之高溫應力-應變行為與熱加工參數之建立( II );Analysis of High-Temperature Stress-Strain Behavior and Establishment of Hot Working Parameters of High-Entropy Alloys( II ) 曾有志; 蔡哲瑋
    2024-09-27 電化學製備微梨形碳化鎢電極結合電化學放電加工藍寶石基板之研究;Research on Ecm of Micro-Pear-Shaped Tungsten Carbide Electrodes Combined with Ecdm of Sapphire Substrates 崔海平
    2024-09-27 數學學門重點計畫:基於隨機狀態相關Riccati方程衝擊角引導的3D目標物攔截系統之研究-子計畫3:高效能控制系統設計,著重在可行性分析(黎卡迪方程式可解性)( II );數學學門重點計畫:Stochastic State-Dependent Riccati Equations Based Impact Angle Guidance in 3d Target Interception-子計畫3:Computationally Efficient Control System Design That Focuses on Applicability Guarantee (Riccati Solvability)( II ) 林立岡
    2024-09-27 複合階梯式行星齒輪機構之動態受載傳動效能 -- 基本分析模型建立與嚙合相位影響分析;Dynamically Loaded Transmission Performance of Compound Stepped Planetary Gear Drives -- Development of a Basic Analysis Model and Analysis of the Influences of Mesh Phasing 蔡錫錚
    2024-09-27 複合雷射圖案活化與無電鍍應用於藍寶石晶圓之微加工與金屬化特徵研究;Characterizing Micromachining and Metallization Features through the Use of Composite Laser Pattern Activation and Electroless Plating on a Sapphire Wafer 何正榮
    2024-09-27 應用可見光通訊、位置指紋和機器學習於工業機器手臂再定位;Applying Vi Sible Communication, Position Fingerprints and Machine Learning for Industrial Robot Arm Repositioning 林錦德
    2024-09-27 應用強化學習於具備多等級多排列模式的Mirco LED巨量轉移技術之研究;Study of Micro Led Mass Transfer Technology Application Reinforcement Learning 林苑婷
    2024-09-27 應用超音速氣泡流於航太構件之高性能電化學加工研究;Research on High-Performance Electrochemical Machining of Aerospace Components Using Supersonic Bubbly Flow 洪榮洲
    2024-09-27 應用顆粒阻尼技術于剛架結構減振分析: 雙向耦合離散元素法與有限元素法理論,電腦模擬及實驗驗證;Application of Particle Damping Technology to Vibration Reduction of Frames: Two-Way Coupled Dem and Fem Method, Computer Modelling and Experimental Validation 鍾雲吉
    2024-09-27 雙波長偏振干涉儀之研發與精密量測之應用;Development and Precision Measurement Applications of Dual-Wavelength Polarization Interferometer 李朱育
    2024-08-08 113年機械工程學系光機電工程組(二年級)-英文-入學考試題 機械工程學系光機電工程組
    2024-08-08 113年機械工程學系光機電工程組(二年級)-普通物理-入學考試題 機械工程學系光機電工程組
    2024-08-08 113年機械工程學系光機電工程組(二年級)-微積分-入學考試題 機械工程學系光機電工程組
    2024-08-08 113年機械工程學系先進材料與精密製造組(二年級)-英文-入學考試題 機械工程學系先進材料與精密製造組
    2024-08-08 113年機械工程學系先進材料與精密製造組(二年級)-普通物理-入學考試題 機械工程學系先進材料與精密製造組
    2024-08-08 113年機械工程學系先進材料與精密製造組(二年級)-微積分-入學考試題 機械工程學系先進材料與精密製造組
    2024-08-08 113年機械工程學系設計與分析組(二年級)-英文-入學考試題 機械工程學系設計與分析組
    2024-08-08 113年機械工程學系設計與分析組(二年級)-普通物理-入學考試題 機械工程學系設計與分析組
    2024-08-08 113年機械工程學系設計與分析組(二年級)-微積分-入學考試題 機械工程學系設計與分析組
    2024-01-26 開發複合金屬薄膜蝕刻製程用於A世代元件製程;Development of Plasma Ion Etching Composite Metal Process and Generation a Device Process 李雄朱
    2024-01-26 學門主題式計畫 - 5G智慧自動化工廠之實現─以藍寶石基板加工為例-學門主題式計畫 - 5G智慧自動化工廠之實現─以藍寶石基板加工為例( II );Realization of Smart Factory with 5g Mobile Networks, Exemplified by Machining of Sapphire Substrate( II ) 林志光; 董必正; 吳曉光; 崔海平; 何正榮; 陳彥文; 李朱育
    2024-01-26 學門主題式計畫 - 5G智慧自動化工廠之實現─以藍寶石基板加工為例-學門主題式計畫 - 5G智慧自動化工廠之實現─以藍寶石基板加工為例( III );Realization of Smart Factory with 5g Mobile Networks, Exemplified by Machining of Sapphire Substrate( III ) 林志光; 陳彥文; 董必正; 崔海平; 李朱育; 何正榮; 吳曉光
    2024-01-26 12寸晶圓線切割關鍵參數及品質優化之人工智能模組研發-12寸晶圓線切割關鍵參數及品質優化之人工智能模組研發( I );Research and Development of Artificial Intelligence Module for Key Parameters and Quality Optimization of 12-Inch Wafer Wire Slicing (Da)( I ) 李朱育; 林志光; 陳志臣; 鍾雲吉

    顯示項目1-50 / 1791. (共36頁)
    1 2 3 4 5 6 7 8 9 10 > >>
    每頁顯示[10|25|50]項目

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明