English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 81570/81570 (100%)
造訪人次 : 47159865      線上人數 : 385
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋
    鄰近類別
    期刊論文 [199/199]
    考古題 [153/153]

    類別統計

    近3年內發表的文件: 103(7.13%)
    含全文筆數: 1445(100.00%)

    文件下載次數統計
    下載大於0次: 1445(100.00%)
    下載大於100次: 1324(91.63%)
    檔案下載總次數: 436704(77.07%)

    最後更新時間: 2025-04-30 06:44


    上傳排行

    資料載入中.....

    下載排行

    資料載入中.....

    RSS Feed RSS Feed
    跳至:
    或輸入年份:
    由新到舊排序 由最舊的開始

    顯示項目1201-1250 / 1445. (共29頁)
    << < 20 21 22 23 24 25 26 27 28 29 > >>
    每頁顯示[10|25|50]項目

    日期題名作者
    2001-07-01 手術用影像導引機器人定位及鑽孔系統之發展; Development of an Image-Guided Robotic Positioning and Drilling System for Surgery 曾清秀; 曾漢民
    2001-07-01 光束擾動的適應性控制研究(II); Adaptive Control of Photon Beam Fluctuation at the SRRC(II) 陳顯禎; 王端正
    2001-07-01 先進及革新性射出成型技術之研究---子計畫二：射出成型智慧型製程控制系統開發之研究; The Development of Integrated Process Control System in Injection Molding 鄭銘章
    2001-07-01 全域性混沌控制之研究; The Study of a Global Controlling Chaos 董必正
    2001-07-01 多項式結構性擾動之最大範圍; Maximal Structured Perturbation for Polynomials 羅吉昌
    2001-07-01 利用同時量測胚體/吸附材的滲透度和毛細壓力進行模擬金屬射出成形中毛細吸附脫脂過程之研究; Simultaneous Measurements of Permeability and Capillary Pressure of Compact/Wick Materials to Model Wick-Debinding in MIM 洪勵吾
    2001-07-01 利用離散點資料之五軸NC加工路徑規劃(I); Five Axis NC Tool Path Generation Utilizing Discrete Point Data(I) 黃衍任
    2001-07-01 技術創造力課程學習模組之發展、實證與評量(I)---總計畫; The Development, Implementation and Evaluation of the Technological Creativity Courses (I) 吳俊諆; 蕭述三
    2001-07-01 汽車駕駛模擬器之研製---子計畫一：駕駛虛擬實境系統之研究(II); The Study of Driving Virtual Reality System(II) 董基良
    2001-07-01 汽車駕駛模擬器之研製---子計畫三：駕駛運動平台之設計與製作(II); The Design and Manufacturing of Driving Motion Platform(II) 鄭銘章
    2001-07-01 汽車駕駛模擬器之研製---總計畫 (II);The Research and Development of Vehicle Driving Simulator System(II) 董基良; 鄭銘章; 馮君平
    2001-07-01 放電表面之磁力研磨加工特性之研究; Finishing Characteristics of Electro-Discharged Surface by Magnetic Abrasive Finishing 顏炳華; 許榮宗
    2001-07-01 氣態預混火焰紊流燃燒速度之實驗研究(IV); Experimental Studies of Turbulent Burning Velocities for Gaseous Premixed Flames(IV) 施聖洋
    2001-07-01 消失模造模時保麗龍模飄移與變型的研究(II); Study on the Drifting and Distortion of Foam Pattern in the Lost Foam Process(II) 施登士
    2001-07-01 高溫廢氣淨化流動式顆粒床過濾技術研究與開發整合型研究---總計畫(III); High Temperature Flue Gas Cleanup-Research and Development of Moving Granular Bed Filter Technology (III) 蕭述三
    2001-07-01 動態信號二維分析整合研究及工程應用; Integrated Studies of Two-Dimensional Analysis for Dynamic Signatures And Their Engineering Applications 潘敏俊
    2001-07-01 參數不確定結構之強健控制; Robust Vibration Control of Structures with Uncertain Parameters 黃以玫
    2001-07-01 氫氣對甲烷在多孔性介質爐中燃燒現象影響之研究; Effects of Hydrogen on Methane Combustion in Porous Medium Burners 曾重仁
    2001-07-01 最小方差預估法應用於主動前饋式噪音消去實作研究; Application of Lattice Predictor on Active Noise Cancellation 江士標
    2001-07-01 渦輪葉片原型之CAD模型重建與五軸加工複製技術發展(II); CAD model reconstruction and 5-axis NC reproduction for turbine blade prototypes(II) 賴景義
    2001-07-01 無鉛銲錫球格陣列構裝製程與可靠 度分析---子計畫三：無鉛銲錫球格陣列構裝接點之金脆損害機理分析;+B972Gold Embrittlement and Its Mechanism on the Joints Connected with Lead-Free Solders by Ball Grid Array Assembly 林景崎
    2001-07-01 超塑性5083鋁合金快速成形研究; Study of Rapid Superplastic Forming of Suplasitcity Aluminum Alloy AA-5083 李雄
    2001-07-01 滑動模式控制在追蹤問題的應用方法改良; A Improved Method for Tracking Problem by Using Sliding Mode Control Technique 張江南
    2001-07-01 預混紊焰表面密度、方向因子和曲率之實驗量測(I); Measurements of Flame Surface Density, Orientation, and Curvature for Premixed Turbulent Flames(I) 施聖洋
    2001-07-01 噴霧式熱傳增強冷凝器空調機之研製; Fabrication of Room Air-Conditioners with Vapor Spray Enhanced Condenser 楊建裕
    2001-07-01 鋁電解電容器用電蝕鋁箔之電蝕機構研究(I); The Research of Etching Mechanism in Etching Foils of Aluminum Electrolytic Capacitor(I) 歐炳隆
    2001-07-01 應用於微機電系統之玻璃的超音波微孔成形加工; Micro-Hole Fabrication of Glass for MEMS by Ultrasonic Machining 顏炳華
    2001-07-01 應用條狀法於平面應變壓延問題之分析與實驗驗證, 兼論硬化模式對解的影響;Analysis and Experimental Verification of Plane-Strain Rolling Problems Using the Slab Method with Investigation of the Effect of Strain-Hardening Models Used on the Results 葉維磬
    2000-12-01 火箭發射系統全程操控虛擬實境技術之研製 董基良
    2000-12-01 火箭發射噪音消除器之研究與設計(II) 潘敏俊
    2000-12-01 析出硬化型汽機葉片不銹鋼腐蝕疲勞性質研究(III); Research on the Corrosion Fatigue Properties of Precipitation-Hardened(III) 林志光
    2000-12-01 超塑性鋁合金快速成形研究(II) 李雄
    2000-12-01 新式燃煤發電技術高溫氣體流動式顆粒床過濾器冷性能測試(II); Cold Performance Test of Moving Granular Bed Filter for Hot-Gas Cleanup of Advanced Coal-Fired Power(II) 蕭述三
    2000-12-01 溫度循環及溫變率大小對於電子產品之破壞效應評估(II); Effect of the Thermal Cycling and Heating Rate on the Failure of Electronic Products(II) 黃俊仁
    2000-10-01 非線性光折變材料生長及其應用技術之研究---子計畫I：光折變晶纖生長及特性增強之研究(III); Growth and Improvement Photorefractive Effect of Single Crystal Fibers(III) 陳志臣
    2000-09-01 光束擾動的適應性控制研究(II);Adaptive Control of Photon Beam Fluctuation at the SRRC(II) 陳顯禎; 王端正
    2000-07-01 三維鍛粗加工之變分上界限解; Variational Upper-Bound of 3 Dimensional Upset Forging 葉維磬
    2000-07-01 小型酒精熱水器之研發-小型酒精熱水器之研發(I); Research and Development of Miniature Ethanol Water Heater(I) 周復初; 程曜
    2000-07-01 不同環境下之沃斯回火球墨鑄鐵疲勞裂縫成長行為; Fatigue Crack Growth of Austempered Ductile Irons in Various Environments 林志光
    2000-07-01 多孔性介質爐中熱增強燃燒現象之研究(II); Thermally Enhanced Combustion in Porous Medium Burners (II) 曾重仁
    2000-07-01 自走式自動檢測及電焊機械臂之研發---子計畫III：自走式自動機械臂之應用-影像視覺系統回饋判斷與焊道路徑偵測之研發; Development of Image Feedback System for Welding Robots 黃衍任
    2000-07-01 利用微細放電及超音波振動研磨製作精密微孔之技術研發; Fabrication of Precision Micro-Hole Using Micro EDMing and Ultrasonic Vibration Lapping 顏炳華
    2000-07-01 固液擴散接合法製作耐溫微接點研究---子計畫IV：固液擴散接合厚膜耐溫微接點研究(III); On the Solid-Liquid Interdiffusion Bonding of Conductive Ag-Containing Thick Films (III) 林景崎
    2000-07-01 金屬粉末射出成型胚體之二維毛細吸附脫脂數值模擬與實驗觀測; The Numerical Simulation and Experimental Visualization of Two Dimensional Wick Debinding in MIM's Compacts 洪勵吾
    2000-07-01 扁平管平行流空調機之研製(III); Development of Parallel Flow Air Conditioner (III) 楊建裕
    2000-07-01 射出成型智慧型製程控制系統開發之研究; The Development of Integrated Process Control System in Injection Molding 鄭銘章
    2000-07-01 氣態預混火焰紊流燃燒速度之實驗研究(III); Experimental Studies of Turbulent Burning Velocities for Gaseous Premixed Flames (III) 施聖洋
    2000-07-01 消失模造模時保麗龍模飄移與變型的研究; Study on the Drifting and Distortion of Foam Pattern in the Lost Foam Pocess 施登士
    2000-07-01 高溫廢氣淨化流動式顆粒床過濾技術研究與開發---子計畫I：染塵濾材於過濾器中之運動行為觀察研究(II); Experimental Study of Filter Granules with Dust Particles Flowing in the a Moving Granular Bed Flue Gas Cleanup Filters (II) 蕭述三
    2000-07-01 高難度、高附加價值擠製鋁合金之合金設計與製程研究(II); The Research of Alloy Composition Design and Manufacture Process for High Difficulty, High Additive Value Extrusion Aluminum Alloys（II） 歐炳隆

    顯示項目1201-1250 / 1445. (共29頁)
    << < 20 21 22 23 24 25 26 27 28 29 > >>
    每頁顯示[10|25|50]項目

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期：8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明