Siblings journal & Dissertation [199/199] pass exam [153/153] Collection Statistics Item counts issued in 3 years: 139(9.39%) Items With Fulltext: 1481(100.00%) Download counts of the item Download times greater than 0: 1481(100.00%) Download times greater than 100: 1356(91.56%) Total Bitstream Download Counts: 479115(77.46%) Last Update: 2025-08-30 21:55 Top Upload Loading... Top Download Loading... Recent Submissions 以耦合離散元素法與顆粒鍵結理論分析材料承受外力或溫度載重下裂縫生成與傳... 固著膠體液滴之擴展及蒸發動力行為與顆粒傳輸效應;Spread and ... 食物廢棄物在連續塞流（螺旋管）反應器中水熱液化成生質原油之計算流體力學... 二相液-固顆粒崩塌流場分析之研究;Study of Liquid-So... 動態負載下修整型行星齒輪傳動機構嚙合齒面接觸特性研究;Study on... 複合階梯式行星齒輪機構之動態受載傳動效能 – 考慮誤差與變形之分析模型... 高衝擊及高精度應用之大型旋轉齒輪軸承動態受載接觸特性研究;Study ... 物理模型反算與深度數據模型競合研究於三維非圓形斷面之擴散光造影驗證;C... 理論解析，數值計算與實驗量測探討平板耦合流體受水下衝擊波之動態行為與反... 基於深度強化式學習之光譜擬合研究用於具有光照治療的3D列印繃帶;Res...

Jump to a point in the index: (Choose year) 2025 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1985 1980 1975 1970 1960 1950 (Choose month) January February March April May June July August September October November December Or type in a year:

Ordering With Most Recent First Show Oldest First

Showing items 151-175 of 1481. (60 Page(s) Totally) << < 2 3 4 5 6 7 8 9 10 11 > >> View [10|25|50] records per page

Date	Title	Authors
2022-07-26	利用微液滴沉積法以及微液滴透鏡進行表面增強拉曼散射檢測之研究;Investigation of Microdroplet Deposition and Microdroplet Lens for Surface-Enhanced Raman Scattering	國立中央大學機械工程學系
2022-07-26	具人工智能安全與檢測感知能力之高功能基板精密複合加工系統研發-具人工智能安全與檢測感知能力之高功能基板精密複合加工系統研發( II );Development of an Information-Security, Artificial-Intelligence and Detection-Perception Smart Fabrication System for Precision Hybrid Machining of High-Performance Substrates( II )	國立中央大學機械工程學系
2022-07-26	固著液滴蒸發對流及結晶圖案形成機制與模擬分析;Convection and Crystallization Pattern of Evaporating Sessile Droplets: Modeling and Simulation	國立中央大學機械工程學系
2022-07-26	金屬積層製造-直接能量沉積技術之氣粉顆粒二相流場分析研究;The Investigations of Gas-Powder Two-Phase Flow on the Ded Technology in Metal Additive Manufacturing	國立中央大學機械工程學系
2022-07-26	動態負載下修整型高接觸率正齒輪對嚙合齒面接觸特性研究(II)－軸變形與偏差影響分析 ( II );Study on the Contact Characteristics of High-Contact-Ratio Spur Gear Pairs with Flank-Modification under Dynamic Loading -- Effects of Shaft Deformation and Misalignment ( II )	國立中央大學機械工程學系
2022-07-26	智能化先進能資源整合區域循環經濟汽電冷共生系統( II );Advanced Intelligent Circular Economy with Combined Cooling, Heat & Power System( II )	國立中央大學機械工程學系
2022-07-26	零碳氨燃燒於近似燃氣輪機條件之實驗研究;An Experimental Study on Zero-Carbon Ammonia Combustion near Gas Turbine Conditions	國立中央大學機械工程學系
2022-07-26	數控內嚙合珩齒加工之齒面修整、降噪齒面紋理、修砂及珩輪動平衡之技術研究;Technical Investigation on Gear Tooth Modification, Dressing and Dynamic-Balancing of Honing Wheel, and Noise-Suppression Gear Surface Texture for Cnc Internal-Meshing Gear Honing Process	國立中央大學機械工程學系
2022-07-26	線電化學放電結合電泳沉積拋光石英晶圓槽道加工之研究;Processing of Quartz Wafer by Combining Wire Electrochemical Discharge Cutting with Electrophoretic Deposition Polishing	國立中央大學機械工程學系
2022-07-26	衝擊角導引律，使用運算效能提升之狀態相關微分型式黎卡迪方程式控制設計;Impact Angle Guidance Law Using Computationally Enhanced State-Dependent Differential Riccati Equation Scheme	國立中央大學機械工程學系
2022-07-26	應用液態金屬線圈於微型發電系統之研究;Applying Liquid Metal Coils in Micro Power Generation Systems	國立中央大學機械工程學系
2022-07-26	薄殼CAD模型之體積分解與混合式實體網格自動建構技術發展( II );Development of Volume Decomposition and Automatic Hybrid Solid Mesh Generation Technology for Thin-Shell Cad Models( II )	國立中央大學機械工程學系
2022-07-26	雙包絡蝸桿蝸輪之齒形設計與傳動特性分析;Profile Design and Analysis of Transmission Characteristics for Double-Enveloping Worm Gear Drives	國立中央大學機械工程學系
2022-07-26	高溫質子交換膜燃料電池金屬多孔流道之抗腐蝕特性研究;Development of Anti-Corrosion Porous Metals for High Temperature Proton Exchange Membrane Fuel Cell	曾重仁
2022-07-26	超薄奈米顆粒堆疊多孔觸媒層應用於高溫質子交換膜燃料電池之研究;Study of Ultrathin Film Nanoparticle Stacked Porous Catalyst Layer in High Temperature Proton Exchange Membrane Fuel Cell	曾重仁
2022-07-26	儲能技術研發與服務產學聯盟( III );Industry-Academia Consortium for Energy Storage Technology Development and Service( III )	曾重仁; 李勝偉; 蘇清源; 張仍奎; 陳正一
2022-07-26	粉末冶金行星齒輪傳動機構精度控制與噪音檢測(I)‐加工誤差影響下傳動效能模擬與分析;Precision Control and Noise Detection of Pm Planetary Gear Drives - Simulation and Analysis of Transmission Performance Due to Manufacturing Errors	蔡錫錚
2021-12-21	混成式擴散光學斷層影像重建技術暨系統化整合研究;Study on Hybrid Diffuse Optical Imaging Technique and System Integration	潘敏俊; 許雅芬
2021-12-21	粉末冶金行星齒輪傳動機構產品系列規劃與分析(II)?產品系列設計專家系統建立;Planning and Analysis of Product Family for Pm Planetary Gear Drives - Expert System for Planning Product Family	蔡錫錚
2021-12-21	動態負載下修整型高接觸率正齒輪對嚙合齒面接觸特性研究(II)－軸變形與偏差影響分析;Study on the Contact Characteristics of High-Contact-Ratio Spur Gear Pairs with Flank-Modification under Dynamic Loading -- Effects of Shaft Deformation and Misalignment	蔡錫錚; 黃國饒
2021-12-21	超高比強度輕量異構組織富鈦中熵合金之韌化設計-超高比強度輕量異構組織富鈦中熵合金之韌化設計( I );Tailoring Heterogeneous Structure to Enhance Strength-Ductility Synergy in Lightweight Ti-Rich Medium-Entropy Alloys with Ultra-High Specific Strength( I )	鄭憲清; 吳欣潔; 羅友杰; 張守一; 黃仲偉; 陳智彥
2021-12-21	台閩漳州系閩南語方言賡續調查研究;A Continued Study of Zhangzhou-Type Southern Min Dialects in Taiwan and Fujian	鄭曉?
2021-12-21	粉粒體運動行為及其分離混合機制之研究;Study of the dynamics and segregation mechanism of granular materials	蕭述三
2021-12-21	顆粒於儲槽排放與熱傳行為之研究;Study of the discharge and heat transfer behavior of granular flow in a silo	蕭述三
2021-12-21	智能化先進能資源整合區域循環經濟汽電冷共生系統( I );Advanced Intelligent Circular Economy with Combined Cooling, Heat & Power System( I )	蕭述三; 楊授印; 賴慶明; 吳耿東

Showing items 151-175 of 1481. (60 Page(s) Totally) << < 2 3 4 5 6 7 8 9 10 11 > >> View [10|25|50] records per page