中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:

Collection

	Electronic Thesis & Dissertation [2899/2899]
	journal & Dissertation [897/897]
	retired tests [328/328]
	Research Project [67/67]

Siblings

	Graduate Institute of opto-Mechatronics [514/514]
	Department of Chemical and Materials Engineering [978/978]
	National Central University Department of Chemical & Materials Engineering [2693/2693]
	International Environment Sustainable Development Program [96/96]
	Department of Civil Engineering [1147/1147]
	Graduate Institute of Civil Engineering [3335/3335]
	Interdisciplinary Program, College of Engineering [9/9]
	International Master Degree Program in Applied Materials Science(IAMS) [9/9]
	Institute of Materials Science and Engineering [666/666]
	Departmant of Mechanical Engineering [1791/1791]
	Graduate Institute of construction engineering [542/542]
	Graduate Institute of Environmental Engineering [1664/1664]
	Energy of Mechatronics [470/470]
	Executive Master of Civil Engineering [633/633]
	Executive Master of Mechanical Engineering [336/336]
	Executive Master of Construction Engineering and Management [174/174]
	Executive Master of Environmental Engineering [349/349]

Community Statistics

	Item counts issued in 3 years: 352(8.40%)
	Items With Fulltext: 4191(100.00%)
Download counts of the item
	Download times greater than 0: 4191(100.00%)
	Download times greater than 100: 3700(88.28%)
	Total Bitstream Download Counts: 2042479(5.04%)

Last Update: 2024-11-26 13:45

Top Upload

Top Download

Recent Submissions

	一種簡易旋轉式LED曝光裝置的設計與實作
	噴嘴外形對超音波輔助噴水效應之探討;Research on the E...
	磁場輔助電化學加工法於不銹鋼陣列微孔拋光之研究;Research on...
	微細片狀電極結合超音波輔助電化學放電加工於石英玻璃加工微槽之研究;In...
	陰離子交換膜水電解單元之傳輸現象分析;Analysis of tran...
	鎳鈦記憶合金電極應用於不鏽鋼彎管內表面電化學拋光之研究;Researc...
	混氣放電線切割加工 N-Type 單晶碳化矽之研究;Research ...
	液體輔助超短脈衝雷射薄石英晶圓微鑽孔研究;Research on Li...
	以超短脈衝雷射內部刻畫技術實現高品質裂面和高效石英晶圓切割探討;Exp...
	基於聚焦成形技術之藍寶石玻璃孔洞自動化量測系統開發;Developme...

Jump to a point in the index:
Or type in a year:

Ordering With Most Recent First

Show Oldest First

Showing items 2951-2975 of 4191. (168 Page(s) Totally)
<< < 114 115 116 117 118 119 120 121 122 123 > >>
View [10|25|50] records per page

Date	Title	Authors
2004	Effect of a degassing treatment on the quality of Al-7Si and A356 melts - Degassing diffusers	Shih,TS; Weng,KY
2004	Effect of beryllium and non-equilibrium heat treatment on mechanical properties of B319.0 alloy with 1 center dot 0%Fe	Wang,PS; Lee,SL; Yang,CY; Lin,JC
2004	Effect of moisture content on the convection motion of powders in a vibrated bed	Hsiau,SS; Tai,CH; Chiang,MC
2004	Effect of preaging on precipitation behavior in aluminum alloy 6063 during high-temperature aging	Ou,BL; Shen,CH
2004	Effects of graphite on wear and corrosion behaviour of SiCp-reinforced copper matrix composites formed by hot pressing	Wu,TF; Qiu,ZW; Lee,SL; Lee,ZG; Lin,JC
2004	Effects of trace lead on the etching of aluminum foils for high voltage electrolytic capacitors	Chen,HC; Ou,BL
2004	Effects of trace silver on etching of aluminum electrolytic capacitor foil	Chen,HC; Ou,BL
2004	Evaluation of computer-assisted multimedia instruction in intravenous injection	Tsai,SL; Tsai,WW; Chai,SK; Sung,WH; Doong,JL; Fung,CP
2004	Fast pointing control for systems with stick-slip friction	Wu,RH; Tung,PC
2004	Fatigue behavior of AISI 347 stainless steel in various environments	Lin,CK; Lan,IL
2004	High-temperature fatigue crack growth behavior of 17-4 PH stainless steels	Hsu,KC; Lin,CK
2004	Improving electrical discharge machined surfaces using magnetic abrasive finishing	Yan,BH; Chang,GW; Chang,JH; Hsu,RT
2004	Influence of the crucible geometry on the shape of the melt-crystal interface during growth of sapphire crystal using a heat exchanger method	Chen,JC; Lu,CW
2004	Observer-based robust H-infinity control for fuzzy systems using two-step procedure	Lo,JC; Lin,ML
2004	Performance comparison between the training method and the numerical method of the orthogonal neural network in function approximation	Chen,CS; Tseng,CS
2004	Placement of flow-corrective elements in a moving granular bed with louvered-walls	Hsiau,SS; Smid,J; Tsai,FH; Kuo,JT; Chou,CS
2004	Random walk approach on the study of void distribution during the resin transfer molding process	Shih,MS; Hourng,LW; Chang,CY
2004	Robust H-infinity nonlinear modeling and control via uncertain fuzzy systems	Lo,JC; Lin,ML
2004	Two-dimensional phase unwrapping with a multichannel least-mean-square algorithm	Chyou,JJ; Chen,SJ; Chen,YK
2003-12-26	磁力研磨與電解磁力研磨之拋光特性研究; Study on finishing characteristics of magnetic abrasive finishing and electrolytic magnetic abrasive finishing	張耿維; Geeng-Wei Chang
2003-09-20	高精度微細孔槽的微放電複合技術研發及其加工特性研究; Study of high precision compound technology of micro-holes and micro-slits and machining characteristic research	王阿成; A-Cheng Wang
2003-09-17	預混紊流燃燒：碎形特性、當量比和輻射熱損失效應 ;Premixed Turbulent Combustion: Effects of Fractal Characteristics, Equivalence Ratio, and Radiative Heat Loss	楊授印; Shou-Yinn Yang
2003-09-15	橫向流流經單一強制振動圓柱之; 流場結構模擬分析 Uniform flow pass a single forced-vibration cylinder for flow field structure simulation analysis	劉姿吟; Tzi-Yin Liu
2003-07-17	油冷卻器熱傳與壓降性能實驗分析; Experimental method to test heat transfer performance and pressure drop of aviation oil cooler.	陳俊成; Jun-Cheng Chen
2003-07-17	冷媒R-134a與潤滑油混合流體於蒸發器含油濃度量測分析; Analysis Lubricant Concentration of R-134a and Lubricant Mixture in Evaporator	劉奕堂; I-Tang Liu