中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:

Collection

	Electronic Thesis & Dissertation [3051/3051]
	journal & Dissertation [897/897]
	retired tests [328/328]
	Research Project [67/67]

Siblings

	Graduate Institute of opto-Mechatronics [523/523]
	Executive Master of Opto-Mechatronics Engineering [2/2]
	Department of Chemical and Materials Engineering [1008/1008]
	National Central University Department of Chemical & Materials Engineering [2774/2774]
	International Environment Sustainable Development Program [96/96]
	Department of Civil Engineering [1178/1178]
	Graduate Institute of Civil Engineering [3429/3429]
	Interdisciplinary Program, College of Engineering [12/12]
	International Master Degree Program in Applied Materials Science(IAMS) [9/9]
	Institute of Materials Science and Engineering [702/702]
	Departmant of Mechanical Engineering [1842/1842]
	Graduate Institute of construction engineering [554/554]
	Graduate Institute of Environmental Engineering [1716/1716]
	Energy of Mechatronics [488/488]
	Executive Master of Civil Engineering [658/658]
	Executive Master of Mechanical Engineering [353/353]
	Executive Master of Construction Engineering and Management [181/181]
	Executive Master of Environmental Engineering [363/363]

Community Statistics

	Item counts issued in 3 years: 376(8.66%)
	Items With Fulltext: 4343(100.00%)
Download counts of the item
	Download times greater than 0: 4343(100.00%)
	Download times greater than 100: 4154(95.65%)
	Total Bitstream Download Counts: 2413847(5.00%)

Last Update: 2025-12-17 07:04

Top Upload

Top Download

Recent Submissions

	基於深度學習之雷射熱裂應力異常預測;Deep Learning-Bas...
	氫預混燃燒：層紊流火焰速度受不同稀釋劑、Lewis 數、層流火焰厚度、...
	連續柴氏長晶法之坩堝設計生長矽單晶之熱場和氧濃度與熱應力數值模擬;Nu...
	柴式長晶法生長8吋矽單晶之不同生長條件對BMD缺陷影響之數值模擬;Nu...
	應用於手動輪椅之可拆式動力輔助模組設計與控制策略實現;Design a...
	基於強化學習之Micro-LED巨量轉移優化研究;A Study on...
	基於有限訓練資料之電動車動力馬達散熱系統智能故障診斷研究;Study ...
	以離散元素法與有限元素法雙向耦合技術分析深溝滾珠軸承轉子系統的動態行為
	以多體動力學與離散元素法雙向耦合理論探討具顆粒阻尼器曲柄滑塊機構的減振...
	一種量子點型式的 Micro-LED顯示裝置結構分析研究

Jump to a point in the index:
Or type in a year:

Ordering With Most Recent First

Show Oldest First

Showing items 476-500 of 4343. (174 Page(s) Totally)
<< < 15 16 17 18 19 20 21 22 23 24 > >>
View [10|25|50] records per page

Date	Title	Authors
2022-06-15	六吋平面反射鏡片撓性支撐結構設計與實驗驗證;Design and Experimental Validation of Flexure Mounts for a Six-Inch Flat Mirror	劉晢彥; Liu, Zhe-Yan
2022-06-15	石墨烯的霍爾效應感測器應用於快速且無標記DNA之研究;The study of graphene-based Hall-effect biosensors applied to rapid and label-free DNA	吳緯振; Wu, Wei-Cheng
2022-05-23	連續波近紅外雷射光之雷射玻璃彎曲技術研發;A New Laser Glass Bending Approach Based on Continuous Wave Near-infrared Laser	廖韡翔; Liao, Wei-Xiang
2022-05-09	超音波輔助電泳沉積拋光鐵基金屬玻璃放電面之研究;The Study of EDMed Surface of the Fe-based Metallic Glass Polishing by Ultrasonic Vibration-assisted Electrophoretic Deposition	林琴南; Lin, Cin-Nan
2022-05-04	多通道慣性感測步態參數分析改善暨驗證並於下肢義肢穿戴者臨床收案研究;Improvement and validation of multi-channel inertia measurement and gait parameters analysis, and the study of its use on lower limb prosthesis wearers	徐瑞育; Hsu, Jui-Yu
2022-05-04	兩階複合式行星齒輪機構設計以及性能與疲勞測試;Design as well as Performance and Fatigue Test of Two-stage Compound Planetary Gear Drives	倪瑋杰; Ni, Wei-Chieh
2022-04-25	凝固裂紋敏感度的新型評估方法;New-type Evaluation Method for Solidification Cracking Susceptibility	劉興穎; Liu, Hsing-Ying
2022-04-15	使用濕式蝕刻後處理輔助之雷射藍寶石通孔研究;Research on Laser Sapphire Vias Using Wet Etch Post-processing	蔣劭威; Chiang, Shao-Wei
2022-04-15	雷射選擇圖案與無電鍍銅沉積應用於鋁矽酸玻璃基板之金屬化;Laser Selective Patterning and Electroless Copper Depostion for Metallization of Aluminosilicate Glass Substrate	吳冠廷; Wu, Guan-Ting
2022-04-12	111年機械工程研究所系統組(丁組)-工程數學(含程式設計)-入學考試題	機械工程研究所系統組
2022-04-12	111年機械工程研究所系統組(丁組)-自動控制-入學考試題	機械工程研究所系統組
2022-04-12	111年機械工程研究所固力與設計組(甲組)-材料力學-入學考試題	機械工程研究所固力與設計組
2022-04-12	111年機械工程研究所固力與設計組(甲組)-動力學-入學考試題	機械工程研究所固力與設計組
2022-04-12	111年機械工程研究所製造與材料組(乙組)-工程數學-入學考試題	機械工程研究所製造與材料組
2022-04-12	111年機械工程研究所製造與材料組(乙組)-材料科學(金屬材料)-入學考試題	機械工程研究所製造與材料組
2022-04-12	111年機械工程研究所製造與材料組(乙組)-機械製造-入學考試題	機械工程研究所製造與材料組
2022-04-12	111年機械工程研究所熱流組(丙組)-流體力學(含熱傳)-入學考試題	機械工程研究所熱流組
2022-04-12	111年機械工程研究所熱流組(丙組)-熱力學-入學考試題	機械工程研究所熱流組
2022-02-21	以資料分散式服務發展智慧產品與其系統之研究;Research on the Development of Intelligent Product and Systems with Data Distribution Service	呂弘基; Lu, Hong-Ji
2022-01-27	探討氣體反壓控制技術下奈米碳管複合材料於超臨界微細發泡射出成型之泡體結構研究;Study of Foaming Morphology in Microcellular Injection Molded MWCNT Composites under Gas Counter Pressure	黃御珉; Huang, Yu-Min
2022-01-26	鉍摻雜至La0.6Sr0.4Co0.2Fe0.8O3 作為質子傳導型SOFC陰極之可行性研究;Bismuth doped La0.6Sr0.4Co0.2Fe0.8O3 as cathode for proton-conducting solid oxide fuel cells	成昕; Cheng, Hsin
2022-01-25	俯臥式擴散光學造影仿體驗證— 彈性光通道/雙波長/同步多頻	張皓喆; HAO-CHE, CHANG
2022-01-24	壓力效應對奈秒重覆脈衝放電引燃機率之影響;The Effect of Pressure on The Ignition Probability of Nanosecond Repetitive Pulse Discharge	石泰光; Shih, Tai-Guang
2022-01-21	超音波與磁場複合輔助遮罩式電化學加工微孔陣列之研究;A Study on Ultrasonic combined Magnetic Field assisted Through-Mask Electrochemical Machining of Micro-hole Arrays	林孟威; Lin, Meng-Wei
2022-01-19	DOpIm：擴散光學造影軟體系統	李柏廷; Li, Bo-Ting