中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:

Collection

	Electronic Thesis & Dissertation [2899/2899]
	journal & Dissertation [897/897]
	retired tests [328/328]
	Research Project [67/67]

Siblings

	Graduate Institute of opto-Mechatronics [514/514]
	Department of Chemical and Materials Engineering [978/978]
	National Central University Department of Chemical & Materials Engineering [2693/2693]
	International Environment Sustainable Development Program [96/96]
	Department of Civil Engineering [1147/1147]
	Graduate Institute of Civil Engineering [3335/3335]
	Interdisciplinary Program, College of Engineering [9/9]
	International Master Degree Program in Applied Materials Science(IAMS) [9/9]
	Institute of Materials Science and Engineering [666/666]
	Departmant of Mechanical Engineering [1791/1791]
	Graduate Institute of construction engineering [542/542]
	Graduate Institute of Environmental Engineering [1664/1664]
	Energy of Mechatronics [470/470]
	Executive Master of Civil Engineering [633/633]
	Executive Master of Mechanical Engineering [336/336]
	Executive Master of Construction Engineering and Management [174/174]
	Executive Master of Environmental Engineering [349/349]

Community Statistics

	Item counts issued in 3 years: 352(8.40%)
	Items With Fulltext: 4191(100.00%)
Download counts of the item
	Download times greater than 0: 4191(100.00%)
	Download times greater than 100: 3700(88.28%)
	Total Bitstream Download Counts: 2042479(5.04%)

Last Update: 2024-11-26 13:45

Top Upload

Top Download

Recent Submissions

	一種簡易旋轉式LED曝光裝置的設計與實作
	噴嘴外形對超音波輔助噴水效應之探討;Research on the E...
	磁場輔助電化學加工法於不銹鋼陣列微孔拋光之研究;Research on...
	微細片狀電極結合超音波輔助電化學放電加工於石英玻璃加工微槽之研究;In...
	陰離子交換膜水電解單元之傳輸現象分析;Analysis of tran...
	鎳鈦記憶合金電極應用於不鏽鋼彎管內表面電化學拋光之研究;Researc...
	混氣放電線切割加工 N-Type 單晶碳化矽之研究;Research ...
	液體輔助超短脈衝雷射薄石英晶圓微鑽孔研究;Research on Li...
	以超短脈衝雷射內部刻畫技術實現高品質裂面和高效石英晶圓切割探討;Exp...
	基於聚焦成形技術之藍寶石玻璃孔洞自動化量測系統開發;Developme...

Jump to a point in the index:
Or type in a year:

Ordering With Most Recent First

Show Oldest First

Showing items 2326-2350 of 4191. (168 Page(s) Totally)
<< < 89 90 91 92 93 94 95 96 97 98 > >>
View [10|25|50] records per page

Date	Title	Authors
2007	Geometry design model of a precise form-milling cutter based on the machining characteristics	Wang,Ger Chwang; Fuh,Kuang Hwa; Yan,Biing Hwa
2007	Growth and optical properties of different compositions of LiNbO3 single crystal fibers	Chen,Chi-Yung; Chen,Jyh-Chen; Chia,Chih-Ta
2007	Impact of Cu/Mg ratio on thermal stability of hot extrusion of Al-4.6 pct Cu-Mg-Ag alloys	Chang,Chih-Hong; Lee,Sheng-Long; Hsu,Tiz-Yu; Lin,Jing-Chie
2007	Improvement on Gabor order tracking and objective comparison with Vold-Kalman filtering order tracking	Pan,MC; Liao,SW; Chiu,CC
2007	Influence of frequency on the high-temperature fatigue crack growth behavior of 17-4 PH stainless steels	Hsu,Kuei-Chang; Lin,Chih-Kuang
2007	Interaction of steel with pure Al, Al-7Si and A356 alloys	Shih,Teng-Shih; Tu,Shu-Hao
2007	Localization of parts with irregular shape for CMM inspection	Jiing-Yih Lai; Kuo-Jen Chen
2007	Low-cycle fatigue behavior of AISI 347 stainless steel in salt water	Lin,Chih-Kuang; Chiu,Chui-Hsien
2007	Modified Smith predictor scheme for periodic disturbance reduction in linear delay systems	Chen,Yi-De; Tung,Pi-Cheng; Fuh,Chyun-Chau
2007	Monitoring the progressive development of an anodized film on aluminum	Wei,Pai-Sheng; Shih,Teng-Shih
2007	Morphological instabilities in time periodic crystallization	Chung,C. A.; Chien,W. Z.; Hsieh,Y. H.
2007	Nanoscale thick layer transfer of hydrogen-implanted wafer by using polycrystalline silicon sacrificial layer	Lee,T. -H.; Huang,C. -H.; Yang,Y. Y.; Suryasindhu,T.; Li,P. W.
2007	Numerical simulation of isothermal nonwetting	Kuo,C-W.; Chen,J-C.; Neitzel,G. P.
2007	On the development of a hole filling algorithm for triangular meshes	Lai,Jiing-Yih; Hsu,Sheng-Han
2007	On the development of CMM inspection technology for parts without regular features	Lai,Jiing-Yih; Chen,Kuo-Jen
2007	On the electrochemical impedance spectroscopy of direct methanol fuel cell	Lai,Chien-Ming; Lin,Jing-Chie; Hsueh,Kan-Lin; Hwang,Chiou-Ping; Tsay,Keh-Chyun; Tsai,Li-Duan; Peng,Yu-Min
2007	Oxide films on magnesium and magnesium alloys	Shih,Teng-Shih; Liu,Jyun-Bo; Wei,Pai-Sheng
2007	Parametric study of injection molding and hot embossing in polymer microfabrication	Wu,Cheng-Hsien; Ku,Hsien-Chang
2007	Pores and microbubbles in Al and Al-XSi alloys	Shih,Teng-Shih; Shie,Chi-Yu; Wei,Pai-Sheng
2007	Pseudo-model technique of biological tissues for the development of NIR diffuse optical tomography	Pan,Min-Chun; Huang,Wei-Hua; Shih,Yih-Lih; Pan,Min-Cheng
2007	Rapid flow of dry granular materials down inclined chutes impinging on rigid walls	Pudasaini,Shiva P.; Hutter,Kolumban; Hsiau,Shu-San; Tai,Shih-Chang; Wang,Yongqi; Katzenbach,Rolf
2007	Reliability life estimation of products using accelerated life-testing	Wang,Kuo-Shong; Tsai,Yuo-Tern
2007	Self-modulating abrasive medium and its application to abrasive flow machining for finishing micro channel surfaces	Hsinn-Jyh Tzeng; Biing-Hwa Yan; Rong-Tzong Hsu; Yan-Cherng Lin
2007	Surface and transverse morphology of micrometer nickel columns fabricated by localized electrochemical deposition	Chang,T. K.; Lin,J. C.; Yang,J. H.; Yeh,P. C.; Lee,D. L.; Jiang,S. B.
2007	The development of a car-driving training system for SCI patients	Lin,Chih-Yung; Doong,Ji-Liang; Hsu,Chun-Chia; Chuang,Tien-Yow; Jeng,Ming-Chang