中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:作者相關文件

類別瀏覽

正在載入社群分類, 請稍候....

年代瀏覽

正在載入年代分類, 請稍候....

"JENG,MC"的相關文件

類別	日期	題名	作者
[機械工程學系] 期刊論文	2011	A Study of Wear and Corrosion Resistance of Arc-Sprayed Ni-Ti Composite Coatings	Chang,CH; Jeng,MC; Su,CY; Huang,TS
[機械工程學系] 期刊論文	2011	Dry Sliding Wear Properties of Ultra-high Molecular Weight Polyethylene Parts Made by the Injection Molding Process	Kuo,HC; Jeng,MC
[機械工程學系] 期刊論文	2011	Optimization of wire electrical discharge machining of pure tungsten using neural network and response surface methodology	Tzeng,CJ; Yang,YK; Hsieh,MH; Jeng,MC
[機械工程學系] 期刊論文	2011	The Influence of Injection Molding and Injection Compression Molding on Ultra-high Molecular Weight Polyethylene Polymer Microfabrication	Kuo,HC; Jeng,MC
[機械工程學系] 期刊論文	2010	Effects of part geometry and injection molding conditions on the tensile properties of ultra-high molecular weight polyethylene polymer	Kuo,HC; Jeng,MC
[機械工程學系] 期刊論文	2010	Rapid mold temperature control in injection molding by using steam heating	Jeng,MC; Chen,SC; Minh,PS; Chang,JA; Chung,CS
[機械工程學系] 期刊論文	2010	Study on Injection Molding Parameters for Thin-Shell Plastic Parts Using a Neural Network-Based Approach	Lin,JC; Yang,YK; Hsiao,YH; Jeng,MC
[機械工程學系] 期刊論文	2010	The influence of injection molding on tribological characteristics of ultra-high molecular weight polyethylene under dry sliding	Kuo,HC; Jeng,MC
[機械工程研究所] 期刊論文	2009	An investigation of thermal sprayed aluminum/hard anodic composite coating on wear and corrosion resistant performance	Chang,CH; Jeng,MC; Su,CY; Chang,CL
[機械工程研究所] 期刊論文	2009	Evidence for the selective attention mechanism and dual-task interference	Liu,CC; Doong,JL; Hsu,CC; Huang,WS; Jeng,MC
[機械工程研究所] 期刊論文	2009	Integrated model of simulated occupant injury risk and real medical costs	Liu,WC; Doong,JL; Tsai,SL; Lai,CH; Jeng,MC
[機械工程研究所] 期刊論文	2009	Optimization of die casting conditions for wear properties of alloy AZ91D components using the Taguchi method and design of experiments analysis	Wen,JL; Yang,YK; Jeng,MC
[機械工程研究所] 期刊論文	2009	Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis	Tzeng,CJ; Lin,YH; Yang,YK; Jeng,MC
[機械工程研究所] 期刊論文	2009	Psychological Benefits of Virtual Reality for Patients in Rehabilitation Therapy	Chen,CH; Jeng,MC; Fung,CP; Doong,JL; Chuang,TY
[機械工程研究所] 期刊論文	2009	RESPONSES IN A MANUAL TRACKING AND VISUAL DETECTION TASK	Liu,CC; Doong,JL; Lin,CY; Lai,CH; Jeng,MC; Hwang,JR
[機械工程研究所] 期刊論文	2009	Survival hazards of road environment factors between motor-vehicles and motorcycles	Li,MD; Doong,JL; Huang,WS; Lai,CH; Jeng,MC
[機械工程研究所] 期刊論文	2006	Using data linkage to generate 30-day crash-fatality adjustment factors for Taiwan	Lai,CH; Huang,WS; Chang,KK; Jeng,MC; Doong,JL
[機械工程研究所] 期刊論文	2005	Analysis and design of thermohydrodynamic on the hydraulic servo cylinder	Yang,RT; Yang,YK; Lin,SS; Jeng,MC
[機械工程研究所] 期刊論文	2004	Analysis of viscosity interaction and heat transfer on the dual conical-cylindrical bearing	Yang,YK; Jeng,MC
[機械工程研究所] 期刊論文	2004	Analysis of viscosity interaction on the misaligned conical-cylindrical bearing	Yang,YK; Jeng,MC
[機械工程研究所] 期刊論文	2004	Assessment of various display devices on a virtual reality-based hand rehabilitation system	Huang,WS; Shing,CY; Fung,CP; Chuang,TY; Jeng,MC; Doong,JL
[機械工程研究所] 期刊論文	2003	Thermohydrodynamic analysis of the misaligned conical-cylindrical bearing with non-Newtonian lubricants	Yang,YK; Jeng,MC
[機械工程研究所] 期刊論文	2002	Comparison of thermal effects on the conical-cylindrical bearing with 2-D and 3-D energy equations	Jeng,MC; Yang,YK
[機械工程研究所] 期刊論文	2002	The study on the tribological properties of fiber-reinforced PBT composites for various injection molding process parameters	Jeng,MC; Fung,CP; Li,TC
[機械工程研究所] 期刊論文	2001	Analysis of thermal effects on the misaligned hydraulic servo cylinder	Yang,YK; Jeng,MC
[機械工程研究所] 期刊論文	1999	Analyses and measurements on bending performance of gas-assisted injection molded parts	Chen,SC; Hu,SY; Chien,RD; Jeng,MC
[機械工程研究所] 期刊論文	1999	Mechanical properties of gas-assisted injection moulded PS, PP and Nylon parts	Chien,RD; Chen,SC; Jeng,MC; Yang,HY
[機械工程研究所] 期刊論文	1997	Fatigue crack growth rate of zirconia ceramics	Hwang,JR; Shih,JL; Jeng,MC
[機械工程研究所] 期刊論文	1997	Study of an assembly tolerance allocation model based Monte Carlo simulation	Lin,CY; Huang,WH; Jeng,MC; Doong,JL
[機械工程研究所] 期刊論文	1997	Tribological characteristics of short glass fibre reinforced polycarbonate composites	Ho,KC; Jeng,MC
[機械工程研究所] 期刊論文	1993	ABRASIVE WEAR STUDY OF BAINITIC NODULAR CAST-IRON	JENG,MC
[機械工程研究所] 期刊論文	1993	ENVIRONMENTAL-EFFECTS ON WEAR BEHAVIOR OF ALUMINA	JENG,MC; YAN,LY
[機械工程研究所] 期刊論文	1993	FINITE-ELEMENT ANALYSIS OF CRACK-GROWTH LIFE PREDICTION UNDER COMPLEX LOAD HISTORY	JENG,MC; DOONG,JL; LIU,WC
[機械工程研究所] 期刊論文	1993	POST WELD HEAT-TREATMENT EFFECTS ON FATIGUE-CRACK PROPAGATION IN AN ELECTRON-BEAM WELDMENT	HWANG,JR; JENG,MC; WANG,CC
[機械工程研究所] 期刊論文	1993	THE EFFECTS OF CARBON CONTENT AND MICROSTRUCTURE ON THE METAL REMOVAL RATE IN ELECTROCHEMICAL MACHINING	JENG,MC; DOONG,JL; YANG,CW
[機械工程研究所] 期刊論文	1993	WEAR BEHAVIOR OF SOLID LUBRICANTS AG AND BAF2-CAF2 OBTAINED BY LASER-SURFACE CLADDING	JENG,MC; SOONG,YL
[機械工程研究所] 期刊論文	1991	WEAR BEHAVIOR OF COBALT-BASED ALLOYS IN LASER SURFACE CLADDING	JENG,MC; YAN,LY; DOONG,JL
[網路學習科技研究所 ] 期刊論文	2010	Integrating video-capture virtual reality technology into a physically interactive learning environment for English learning	Yang,JC; Chen,CH; Jeng,MC

資料載入中.....

類別瀏覽

年代瀏覽

"JENG,MC"的相關文件