鄰近類別 研究計畫 [67/67] 期刊論文 [897/897] 考古題 [328/328] 類別統計 Item counts issued in 3 years: 376(12.32%) Items With Fulltext: 3051(100.00%) Download counts of the item Download times greater than 0: 3051(100.00%) Download times greater than 100: 2869(94.03%) Total Bitstream Download Counts: 1812159(74.76%) Last Update: 2025-12-23 23:48 上傳排行 資料載入中..... 下載排行 資料載入中..... 最近上傳 基於深度學習之雷射熱裂應力異常預測;Deep Learning-Bas... 氫預混燃燒：層紊流火焰速度受不同稀釋劑、Lewis 數、層流火焰厚度、... 連續柴氏長晶法之坩堝設計生長矽單晶之熱場和氧濃度與熱應力數值模擬;Nu... 柴式長晶法生長8吋矽單晶之不同生長條件對BMD缺陷影響之數值模擬;Nu... 應用於手動輪椅之可拆式動力輔助模組設計與控制策略實現;Design a... 基於強化學習之Micro-LED巨量轉移優化研究;A Study on... 基於有限訓練資料之電動車動力馬達散熱系統智能故障診斷研究;Study ... 以離散元素法與有限元素法雙向耦合技術分析深溝滾珠軸承轉子系統的動態行為 以多體動力學與離散元素法雙向耦合理論探討具顆粒阻尼器曲柄滑塊機構的減振... 一種量子點型式的 Micro-LED顯示裝置結構分析研究

跳至: (選擇年份) 2025 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1985 1980 1975 1970 1960 1950 (選擇月份) January February March April May June July August September October November December 或輸入年份:

由新到舊排序 由最舊的開始

顯示項目2051-2100 / 3051. (共62頁) << < 37 38 39 40 41 42 43 44 45 46 > >> 每頁顯示[10|25|50]項目

日期	題名	作者
2007-07-21	腰椎人工椎間盤之運動軌跡分析; Analysis of the Motion Locus of Lumbar Artificial Disc	錢威廷; Wei-Ting Chien
2007-07-20	探空火箭酬載回收艙結構之設計; Structural Design of Reentry Capsule for Sounding Rocket Mission	邱垂銨; Chui-An Chiu
2007-07-20	以液晶熱像法探討微小管內之熱傳特性; Experimental Analysis on Forced Convective Heat Transfer Characteristics in Micro Tubes by the Method of Liquid Crystal Thermography	林廷祐; Ting-Yu Lin
2007-07-19	陽極導引微電鍍之機構及控制研究; The Research on Mechanism and Control System for Micro-Anode Guided Electroplating	李棟樑; Dong-liang Lee
2007-07-16	車用光碟機之適應性複合控制; Adaptive Hybrid Control for DVD Drives in Vehicle Systems	錢群; Chun Chien
2007-07-12	異徑壓延板材彎曲曲率之實驗研究; Experimental Research of Sheets Curvature under Different Diameter Rolling	張東堯; Dong-Yao Jhang
2007-07-12	以鍛粗加工實驗驗證變分上界限法; Experimental Verification of The Variational Upper-Bound Method Using Upset forging Tests	洪嘉駿; Jia-Jyun Hong
2007-07-12	矩形杯引伸成形料片外形設計之有限元素分析; The blank shape designed of the rectangular cups in deep drawing by FEM method.	林宏杰; Hong-Jie Lin
2007-07-11	雷射光干涉微影技術之建立及應用於光子能隙結構; The study of laser interferometric lithography technique and its application on the fabrication and analysis of the photonic band gap structures	簡政尉; Cheng-Wei Chien
2007-07-10	氫能利用：新型可攜式潔淨電源產生器實作與數值分析; Hydrogen Usage Technology: Experimental and Numerical Studies on small Portable Clean Power Generator	陳致銘; Jhih-Ming Chen
2007-07-10	金屬網型質子交換膜燃料電池之研究; Study on the Metal Mesh Type Polymer Electrolyte Membrane Fuel Cell	陳豐璋; Jong-Jhang Chen
2007-07-10	平板式固態氧化物燃料電池穩態熱應力分析; Steady-state thermal stress analysis of a planar solid oxide fuel cell	周欣鋒; Hsin-Feng Chou
2007-07-09	電腦輔助機械零件製造成本預估 – 以單軸押出機減速機為例 ;Computer Aided Estimation of Manufacturing Costs of Machine Parts in Design Stage – With an Example of a Single-Axle Extruder Drive	吳振漢; Chen-Han Wu
2007-07-09	車輛零組件路況模擬系統之開發研究; Road Simulation Testing System for Vehicles	陳坤村; Kun-tsun Chen
2007-07-09	應用殘障駕駛模擬器探討失衡路況對人體重心影響之研究; Study on the Effect of Unbalanced Roads on the Center of Gravity of Human Body with Driving Simulator	徐煒樺; Wei-hua Hsu
2007-07-07	高彎曲度之人工膝關節多軸向動態磨耗試驗機開發; Development of Multiaxial Dynamic High Flexion Knee Wear Simulator	許能昌; Neng-Chang Hsu
2007-07-07	共振頻率法於牙根植體缺損位置判別研究; THE BONY DEFECTED LOCATION on DENTAL IMPLANTS by THE FREQUENCY RESPONSE METHOD	陳梓尉; Zih-Wei Chen
2007-07-07	人體膝關節之高度彎曲電腦動態實體模型的建立; Development of Dynamic Model for Posterior-stabilized Knee Prosthesis	王裕民; Yu-Ming Wang
2007-07-07	足型與足壓電腦輔助分析系統開發; Development of the Computer-aided System for Synchronized Measurement of Foot Shape and Pressure	劉家忠; Chia-Chung Liu
2007-07-07	潤滑劑與製程參數對Al-0.8Mg-0.5Si鋁合金擠壓鑄件的影響; Effects of lubricant and processing parameters in squeeze casting Al-0.8Mg-0.5Si aluminum alloy	黃永森; Yung-Sen Huang
2007-07-07	超低溫液態氮生物試片儲存槽的研發; Development of A Manual liquid nitrogen Speciment storage system	葉永州; Yung-Chou Yeh
2007-07-06	在不同氣氛下Al-XSi(X=0,1.2wt%)合金熱合氧化膜的成長機制; Thermally-Formed oxide on the Al-XSi (X=0 and 1.2mass%) Alloy in Different Gases	黃其超; Chi-Chau Huang
2007-07-06	電蝕條件對鋁電解電容器用鋁箔影響之研究; EFFECT OF ETCHING PARAMETER ON ALUMINUM ELECTROLYTIC CAPACITOR FOIL	邱奕宏; Yi-Hung Chiu
2007-07-06	平板式固態氧化物燃料電池使用雲母封裝材料之熱應力分析; Thermal Stress Analysis of a Planar SOFC Stack with Mica Sealants	陳安信; An-Hsin Chen
2007-07-06	在不同氣氛下Al-XMg(X=2,4wt%) 熱合氧化膜的成長機制; Thermally-Formed Oxide on Al-XMg(X=2,4wt%) Alloys in different atmosphere	吳俊逸; Yi-chun WU
2007-07-06	汽車輕量化車體結構用6000系鋁合金之研究; The Study on the Weight Reduction for Body Structure of Automobile Uses 6000 Series Aluminum Alloys	沈晉輝; Chin-Hui Shen
2007-07-06	格狀自動機探討組織工程細胞體外培養研究; Modeling and Simulation of the Tissue Engineering Cell Culture Using Cellular Automata.	陳世迪; Shih-di Chen
2007-07-06	數位X光片於預測術後人工膝關節空間關係之研究; Fluoroscopy Based Artificial Knee Replacement Post-operation and Wearing Evaluation	莊博寓; Po-yu Chuang
2007-07-05	不同負載模式對錫-銀-銅無鉛銲錫接點低週疲勞行為之影響; Low Cycle Fatigue Behavior of Lead-Free Sn-Ag-Cu Solder Joint under Various Loading Modes	周佳樺; Chia-Hua Chou
2007-07-05	智慧型材料驅動機械手之設計; Designing the prosthetic hand actuated by smart material	董志強; Chih-Chiang Tung
2007-07-05	壓電耦合吸振器應用於旋轉樑之減振; Reducing Vibration of A Rotating Beam By Using The Coupled Piezoelectric Dynamic Absorbers	李光君; Kuang-Chun Lee
2007-07-05	固態氧化物燃料電池金屬連接板之氧化研究; Oxidation Behavior of Various Metallic Alloys for SOFC	倪學光; Hsueh-Kuang Ni
2007-07-05	直接模擬蒙地卡羅法於高低速流場之模擬; Monte Carlo Simulations of High and Low-Speed Rarefied Gas Flows	鄭朝恩; Chaw-En Zhen
2007-07-05	電化學微電極製程之最佳化參數分析; The analysis of influence level on fabricating micro-column electrode tool by using electrochemical maching	楊明棋; Ming-Chi Yang
2007-07-05	高功率發光二極體於自然對流環境下之熱流場分析; Thermal-Fluid analysis of HBLEDs under the natural convection	葉隆興; Long-Sing Ye
2007-07-05	利用氣相傳輸平衡產生近化學計量配比之摻釕鈮酸鋰晶體特性研究; Properties of Ru-doped near-stoichiometric lithium niobate crystals produced by vapor transport equilibration	黃子銘; Tzu-ming Huang
2007-07-04	航太葉片座標定位與翼形面檢測技術發展; On the Development of the Coordinate Setup and Airfoil Profile Inspection Technique for Blades	徐道賢; Tao-Hsien Hsu
2007-07-04	17-4 PH不銹鋼高溫疲勞裂縫成長行為研究; High-Temperature Fatigue Crack Growth Behavior of 17-4 PH Stainless Steel	許貴彰; Kuei-Chang Hsu
2007-07-03	組織工程用三維支架之電腦輔助製程設計; Computer-aided process design in 3D scaffolds for tissue engineering	陳彥霖; Yen-Lin Chen
2007-07-03	向量控制應用於永磁同步電動機驅動器之建立; Development of PMSM Driver Based on Vector Control	何郁達; Yu-Ta Ho
2007-07-03	以數位信號處理器為基礎之直流無刷馬達驅動系統; DSP-Based Brushless DC Motor Drive System	陳冠仁; Kuan-Jen Chen
2007-07-03	應用於髖關節表面重建手術之C-arm影像輔助手術導引系統; C-arm-based navigation system for hip resurfacing arthroplasty	范紀偉; Chi-Wei Fan
2007-07-02	逆向工程技術應用於汽油引擎進氣氣道開發之研究; inlet port development of gaoline engine by applying the reverse engineering technology	郭憲德; Hsien-Ter Kuo
2007-07-02	自動化焊接系統之研究; A Study of an Automatic Welding System	李建毅; Chien-Yi Lee
2007-06-29	二足機器人之三軸動態平衡分析	柯宏諺; Hong-Yan Ke
2007-06-29	旋壓成型加工對A356(Al-7Si-0.3Mg)鑄造鋁合金微結構與機械性質之影響; The effect of spinning process on microstructure and mechanical properties of cast A356(Al-7Si-0.3Mg) alloy	許釋元; Szu-Yuan Hsu
2007-06-29	電化學鑽孔加工之模擬; The simulation of the electrochemical drilling	黃銘志; Ming-chih Huang
2007-06-29	虛擬場景模組化與自動編輯系統開發之研究; Development of Virtual Scene Modules and Automatic Scene Editing System	張弘毅; Hone-yi Zhang
2007-06-29	Cu含量對Al-12.5Si-1.0Mg合金熱穩定性與磨耗性質之影響; Effect of Cu content on the thermal stability and wear behavior of Al-12.5Si-1.0Mg alloy	潘韋龍; Wei-long Pan
2007-06-29	虛擬內視鏡基礎技術訓練系統學習轉移之研究; Learning Diversion of Virtual Laparoscopy Surgery Basic Skill Training System	顏志育; Chih-yu Yen

顯示項目2051-2100 / 3051. (共62頁) << < 37 38 39 40 41 42 43 44 45 46 > >> 每頁顯示[10|25|50]項目