鄰近類別 研究計畫 [67/67] 期刊論文 [897/897] 考古題 [328/328] 類別統計 Item counts issued in 3 years: 376(12.32%) Items With Fulltext: 3051(100.00%) Download counts of the item Download times greater than 0: 3051(100.00%) Download times greater than 100: 2869(94.03%) Total Bitstream Download Counts: 1812159(74.76%) Last Update: 2025-12-23 23:48 上傳排行 資料載入中..... 下載排行 資料載入中..... 最近上傳 基於深度學習之雷射熱裂應力異常預測;Deep Learning-Bas... 氫預混燃燒：層紊流火焰速度受不同稀釋劑、Lewis 數、層流火焰厚度、... 連續柴氏長晶法之坩堝設計生長矽單晶之熱場和氧濃度與熱應力數值模擬;Nu... 柴式長晶法生長8吋矽單晶之不同生長條件對BMD缺陷影響之數值模擬;Nu... 應用於手動輪椅之可拆式動力輔助模組設計與控制策略實現;Design a... 基於強化學習之Micro-LED巨量轉移優化研究;A Study on... 基於有限訓練資料之電動車動力馬達散熱系統智能故障診斷研究;Study ... 以離散元素法與有限元素法雙向耦合技術分析深溝滾珠軸承轉子系統的動態行為 以多體動力學與離散元素法雙向耦合理論探討具顆粒阻尼器曲柄滑塊機構的減振... 一種量子點型式的 Micro-LED顯示裝置結構分析研究

跳至: (選擇年份) 2025 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1985 1980 1975 1970 1960 1950 (選擇月份) January February March April May June July August September October November December 或輸入年份:

由新到舊排序 由最舊的開始

顯示項目951-1000 / 3051. (共62頁) << < 15 16 17 18 19 20 21 22 23 24 > >> 每頁顯示[10|25|50]項目

日期	題名	作者
2018-01-09	以冷凍成型積層製造及固態水支撐製程製作水性生物可降解型聚胺酯與殼聚醣支架之實驗與分析;Experiment and Analysis on Waterborne Biodegradable Polyurethane and Chitosan Scaffold Fabricated by Frozen-Form Additive Manufacturing and Sacrificial Process using Phase Change of Water	楊泓璟; Yang, Hung-Ching
2018-01-08	-;DEVELOPMENT OF OVERLAPPING REMOVAL ALGORITHM ON 3D FRACTURED BONE MODEL FOR THE ASSEMBLY APPLICATION IN 3D PRINTING	塔爾瑪; BINTARA, REDYARSA DHARMA
2017-12-13	高溫高壓預混異辛烷火焰之層流與紊流燃燒速度量測與正規化分析	于德維; Yu, De-Wei
2017-11-29	以二相流離散元素電腦模擬與物理實驗探討液體中顆粒體崩塌行為	陳定偉; Chen, Ting-Wei
2017-11-23	鹽水液滴在常壓環境下乾燥過程的建模與模擬	吳帛軒; WU, PO-HSUAN
2017-11-21	一般顆粒體與可破裂顆粒體在單向度束制壓縮作用下之力學行為	陳彥澈; Chen, Yen-Tse
2017-11-20	合金元素對鋁犧牲陽極微結構與電化學特性之影響;Effect of alloy element on the microstructure and electrochemical properties of Al anode	朱嘉誠; Jhu, Jia-Cheng
2017-11-20	金屬輔助化學蝕刻製備多孔矽結構與其熱傳性質分析;Manufacturing and Thermal Property Analysis of Porous Silicon Structure by Metal Assisted Chemical Etching	潘詳親; PAN, XIANG-QIN
2017-11-09	The Research of Material Deposition Process for Bio-scaffold Fabrication in Tissue Engineering Applications	范玉海; Pham, Ngoc-Hai
2017-10-27	以數值分析法分析氮化鎵薄膜沉膜機制之探討暨實作驗證;Numerical Verification for Prediction of Gallium Nitride Thin Film Growth	胡智愷; Chih-Kai, Hu
2017-10-27	金屬鋁薄膜V 型樑結構微熱致動器模擬與實驗;Simulation and Experiment of Aluminum V-beam Micro Thermal Actuators	李冠霖; Lee, Guan-Lin
2017-10-24	以物理實驗探討顆粒形狀 對顆粒體在旋轉鼓中傳輸性質的影響	羅敏夫; Lo, Min-Fu
2017-10-23	擺線行星齒輪傳動機構之動態負載分析	張靖; Chang, Ching
2017-10-17	基於雙光子聚合技術之長軸成形法製造高深寬比結構;Longitudinal Forming Method for Fabrication of High Aspect Ratio Structure based on Two-photon Polymerization Technology	高健閔; Kao, Chien-Min
2017-10-16	基於二維影像輪廓重建三維模型技術之多視角相機群組空間座標系統整合;The Integration of Coordinate Systems from Multi-View Camera Groups for Shape-From-Silhouette Technique	任宥霖; Ren, You-Lin
2017-10-11	以物理實驗探討顆粒形狀 對顆粒體在振動床中傳輸性質的影響	盧仁揚; Lu, Jen-Yang
2017-09-15	雙電解槽電解水產氫於多電極組下之效能研究;Parameter analysis of hydrogen production by Multi-electrode dual cell water electrolysis	陳彥廷; Chen, Yen-Ting
2017-08-25	齊次多項式尤拉法應用於切換式模糊觀測器設計;Piecewise Fuzzy Observer Design - Homogeneous Polynomial Lyapunov Euler Method	巴宇平; Ba, Yu-Ping
2017-08-23	CZ法生長藍寶石單晶之熱應力數值模擬分析;Numerical Simulation of Thermal Stress for Growing Sapphire Crystal in the Czochralski Process	吳宜達; WU, YI-TA
2017-08-23	超音波振動輔助鋁合金A6061拉伸試驗之研究	粘凱智; NIAN, KAI-ZHI
2017-08-23	開發電化學剝離石墨烯與聚合物複合材料於防腐蝕塗層;Development of corrosion protection performance electrochemical exfoliating graphene – polymer composite coatings	納塔莉亞; Ganda, Andita Nataria Fitri
2017-08-23	雷射熔融製程熱傳與應力分析;Thermal and Mechanical Analysis of Laser Melting Process	施宣豪; Shih, Hsuan-Hao
2017-08-23	齊次多項式尤拉法應用於切換式模糊控制器設計;Piecewise Fuzzy Controller Design—Homogeneous Polynomial Lyapunov Euler Method	戴均維; Tai, Jun-Wei
2017-08-22	A4032與鑄/鍛Al-1.2Mg-1Si-1Cu合金的機械性質與磨耗特性研究	鄭偉諒; Cheng, Wei-Liang
2017-08-22	使用單向固化法生長1.6噸級太陽能多晶矽晶碇之數值模擬分析;Numerical Simulation Analysis of 1.6 ton Solar Multicrystalline Silicon Ingots by Directional Solidification Process	侯致中; Hou, Zhi-Zhong
2017-08-22	定點銲接熱傳與應力分析在空調壓縮機組裝之應用;Application of Thermal and Mechanical Analysis of Fixed-Point Welding on Air-Conditioning Compressor Assembly	宋程智; Sung, Cheng-Chih
2017-08-22	噴流式MOCVD入口導流設計之熱流與質傳分析;Jet flow MOCVD inlet diversion design and analysis of heat flow and mass transport	洪維振; Hung, Wei-Chen
2017-08-22	鑄鍛與陽極處理對Al-1.2Mg-1.0Si-1.0Cu合金的機械性質與疲勞性質研究	林家瑋; Lin, Jia-Wei
2017-08-21	以CNC內珩齒機加工具鼓形之錐狀齒輪之研究;A Study on Manufacture of Beveloid Gears with Crowned Tooth Flank Using a CNC Internal Gear Honing Machine	鍾荏羽; Zhong, Ren-Yu
2017-08-21	以CNC內珩齒機進行螺旋齒輪齒面拓樸修整之研究;A Study on Topological tooth Modification of Helical Gears Using a CNC Internal Honing Machine	蔡有淳; Tsai, Yu-Chun
2017-08-21	有限元素法與反應曲面法對傘形齒輪旋轉鍛造之模具磨耗分析	黃乙玄; Hwang, Yi-Xuan
2017-08-21	考量氣體負載下迴轉式壓縮機動態負載分析模型之建立;Modeling of Dynamic Analysis of A Rotary Compressor with Considering Gas-induced Loads	呂明恆; Lu, Ming-Heng
2017-08-21	等通道彎角擠製之有限元素法及反應曲面法分析	陳彥麒; Chen, Yen-Chi
2017-08-21	電動車鋰電池模組冷卻之模擬	陳柏維; Chen, Bo-Wei
2017-08-21	鍶錳酸鑭鍍層對固態氧化物燃料電池接合件潛變性質之影響;Effects of LSM Coating on the Creep Properties of Joints in Solid Oxide Fuel Cell	林廷緯; Lin, Ting-Wei
2017-08-21	Underwater Position Control of Particles	涂右霖; Tu, You-Lin
2017-08-21	不同流道型式之蒸發熱交換器的熱傳性能研究	李至誠; Lee, Chih-Cheng
2017-08-18	漸開線與切線雙圓弧齒形之諧波齒輪有限元素分析與齒形設計;Study on the Tooth Profile Design and Finite Element Analysis (FEA) of Harmonic Drives with Involute Profile and Double-Circular-Arc Profile	程雲豪; Cheng, Yun-Hao
2017-08-16	KY法生長大尺寸氧化鋁單晶過程之 數值模擬分析;Numerical Simulation of Large-Size Sapphire Crystal during the Kyropoulos Process	莊效存; Chuang, Hsiao-Tsun
2017-08-16	The Effects of Natural Teeth with Different Interface Tissue around Implant towards Significant Direction of Resonance Frequency Vibration of Dental Implant on Human Mandible by Resonance Frequency Analysis	李思媞; Nirmalasari, Putu Risti
2017-08-16	球狀鐵顆粒添加對鎂鋅鈣金屬玻璃機械性質改善之研究;The Improvement of Mechanical Properties of Mg-based Metallic Glass with Ex-situ Adding Spherical Iron Particles	施博錕; Shih, Po-Kun
2017-08-16	裝置於微流體晶片上的環狀超聲波共振壓電片套用於微流體技術與質譜儀分析之間的介面應用;Piezo-Ring-on-Chip Microfluidics Device for Mass Spectrometry Interfacing	雷以兆; Lei, I-Chao
2017-08-16	藉由熱接合、表面改質與溶劑處理方法 封閉於環狀嵌段共聚物與環烯烴共聚物材料上 微流道之研究;Investigation of Cyclic Block/Olefin Copolymer Microchannel Sealing by Thermal Bonding, Surface Modification and Solvent Treatment	顏嘉誼; YEN, Chia-Yi
2017-08-15	設計與製作圓錐平板型生物反應器並用以探討流體剪應力對膀胱癌細胞自噬行為之影響	林楷恒; Lin, Kai-Heng
2017-08-14	力學與化學機轉調節內皮細胞隨機形成體外初期微血管叢之建模與模擬	姜洵; CHIANG, HSUN
2017-08-14	不平衡識別應用於磁浮軸承自動平衡控制	楊政倫; Yang, Cheng-Lun
2017-08-14	時變流率對多孔介質指形流的影響	邱瑞祥; CHIU, JUI-HSIANG
2017-08-10	中低密度高熵合金之合金設計與其微結構變化之研究;Alloy design and microstructure evolution of the medium-low density high entropy alloys	廖俞欽; Liao, Yu-Chin
2017-08-08	加工液濁度檢測器之設計	莊東霖; Chuang, Dong-Lin
2017-08-03	CAD模型之倒角特徵辨識技術發展;Development of Chamfer Recognition Technology for CAD Model	何馬維; Wibhisana, Himawan

顯示項目951-1000 / 3051. (共62頁) << < 15 16 17 18 19 20 21 22 23 24 > >> 每頁顯示[10|25|50]項目