鄰近類別 研究計畫 [96/96] 期刊論文 [77/77] 考古題 [176/176] 類別統計 近3年內發表的文件: 89(11.71%) 含全文筆數: 760(100.00%) 文件下載次數統計 下載大於0次: 760(100.00%) 下載大於100次: 659(86.71%) 檔案下載總次數: 431237(73.32%) 最後更新時間: 2024-11-22 03:31 上傳排行 資料載入中..... 下載排行 資料載入中..... 最近上傳 綠色供應鏈之合約設計：利潤與永續性的平衡;Design of Cont... 在綠電環境中透過合約設計降低供應之風險;Reducing supply... A Study of Asymmetric Information i... 建構隱含狄利克雷分布模型--以文本情感分析解析 A bi-objective flexible job shop sc... 類Locusbots系統於分區揀貨倉庫的 揀貨人員Robot選取問題研... 類Locusbots系統於分區揀貨倉庫之兩種揀貨機器人作業流程的比較研... 類Locusbots系統於分區揀貨倉庫 的揀貨人員Block選取問題研... 應用深度學習優化塗佈機之預測性維護;Applying Deep Lea... 基於輕量級語義分割網路結合自動生成像素級標籤技術的晶圓圖混合型缺陷模式...

跳至: (選擇年份) 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1985 1980 1975 1970 1960 1950 (選擇月份) January February March April May June July August September October November December 或輸入年份:

由新到舊排序 由最舊的開始

顯示項目201-250 / 760. (共16頁) << < 1 2 3 4 5 6 7 8 9 10 > >> 每頁顯示[10|25|50]項目

日期	題名	作者
2018-07-24	考量時間電價之家用電器排程規劃;Optimal Scheduling of Household Appliances under Time-of-Use Pricing	鄒逸凱; Zou, Yi-Kai
2018-07-24	利用貝氏方法探討 需求不確定下之存貨水準設定;On Investigating Periodic-Review Inventory Systems Using Bayesian Analysis	曾彥甄; Tseng, Yen-Chen
2018-07-24	利用設計結構矩陣建構智慧化ERP	陳弘翔; Chen, Hung-Hsiang
2018-07-23	應用偏差控制變異技術估計網路等候之平均等候時間;The Mean Waiting Time Estimation of Queueing Network via Biased Control Variates	林妤璟; Lin, Yu-Ching
2018-07-20	A Polynomial Time Approximation Scheme for Parallel Machine Scheduling with Machine Availability Constraints	周書平; Chou, Shu-Ping
2018-07-20	合併控制變量於具限制式之完全連續選擇程序;Applying Fully Sequential Procedures for Comparing Constrained Systems with Control Variate	陳瑋; Chen, Wei
2018-07-20	無人機產品家族的協同設計與供應	蔡東昕; Tsai, Tung-Hsin
2018-07-20	電動車用鋰電池回收與再利用之研究;The study of Recycling and Reusing of Lithium Battery for Electric Vehicles	邱帝為; Chiu, Di-Wei
2018-07-20	隨機克利金法在受限制下的模擬應用於週期性訂貨政策最佳化;Stochastic Kriging Metamodeling in Constrained Simulation Optimization :on Inventory Period Review Policy	杜俊學; Du, Jun-Xue
2018-07-20	應用QFD與DSM設計模組化3D列印機;Applying QFD and DSM to Design Modular 3D Printers	陳彥儒; Chen, Yan-Ru
2018-07-19	廢棄輪胎逆物流之利潤分析;Analysis of the profit of scrap tires	林芩羽; Lin, Chin-Yu
2018-07-18	結合變異數縮減技術於隨機網路;Combination of Variance Reduction Technique on Stochastic Edge Networks	陳品頤; Chen, Pin-Yi
2018-07-17	鞋類回收再利用之流程與模型分析;The Process and Model Analysis of Footwear Recycling and Reuse	黃宇伶; Huang, Yu-Ling
2018-07-10	「廢機動車輛粉碎殘餘物」之回收再利用利潤分析;A Study of Automobile Shredder Residues (ASR) Recycling and Profit Analysis	許恒毓; Hsu, Heng-Yu
2018-07-10	非小細胞肺癌患者第一線藥物之多目標分析- 醫療成效與成本;Multiple objective analysis of first line medicine with non-small cell lung cancer – medical effect and medical cost	李旻嘉; Lee, Min-Chia
2018-07-04	半導體製程設備耗材供應商評選分析法	趙桂明; Chao, Kuei-Ming
2018-07-04	群集與產品多樣性對於賣家決策之影響;The Impact of Clustering and Product Variety on Seller′s Decision	艾絲雅; Alfira, Elsya Dhana
2018-06-29	公平偏好下製造商品牌與零售商自有品牌之競爭問題;The Competition between National Brand and Private Label under Fairness Concerns	江婉瑜; Jiang, Wan-Yu
2018-06-22	風機廠品質管理系統之研究	梁維新; Liang, Wei-Hsin
2017-08-01	T分配統計量轉換方法在偏斜分配下的衡量與比較;Evaluate and compare the transformation of T-statistic with skewed data	蘇貫文; Su, kuan-Wen
2017-07-28	平行機台具有彈性維護週期與接續完工限制 求極小化總完工時間排程問題;Parallel Machine Scheduling with Flexible Maintenance and Resumable Jobs for Minimizing Total Completion Time	蔡尚澄; Tsai, Shang-Cheng
2017-07-27	管理物聯網風險 - 食品工業為例;Managing Risk for the Internet of Things – the Food Industry as a case	黃黎薇; VY, HUYNH LE
2017-07-26	改善正確選取機率於兩階段排序與選取法;Improving the probability of correct selection in two - stage ranking and selection method	李嘉倫; Lee, Jia-Lun
2017-07-26	建立非對稱市場潛力之替代品與對稱互補性之互補品重新探討RCM和CC;Re-investigating RCM and Category Captainship for Substitute Products under Non-Symmetric Market Potential and Complementary Products under the Symmetric Complementarity	王貞邦; Wang, Chen-Bang
2017-07-26	建立非對稱交叉價格敏感度之替代品與 對稱互補性之互補品重新探討RCM 和CC;Re-investigating RCM and Category Captainship for substitute products under non-symmetric cross-price sensitivity and complementary products under the symmetric complementarity	曾云; Tseng, Yun
2017-07-26	類 Kiva 系統的「Pod 分配之揀貨站挑選」、 「Pod 分配於揀貨站」與「品項分配至訂單」問題之探討	宋狄軒; Sung, Ti-Hsuan
2017-07-26	類Kiva系統之「Kiva分配於Pod」與「Pod停放位置分配」問題之探討	黃靖華; Huang, Jing-Hua
2017-07-26	類似Kiva系統之Pod儲位分配問題探討	蘇芳儀; Su, Fang-I
2017-07-26	類似Kiva系統之訂單分配於揀貨工作站與訂單選取探討	楊卓翰; Yang, Cho-Han
2017-07-25	雙機流程型生產環境下具批量與等候時間限制和機台架設時間的多產品排程問題;Lot streaming for multiple products in two-machine flow shops with limited waiting time constraint and setup time	王亭鈞; Wang, Ting-Chun
2017-07-24	列式資料倉儲在隨機查詢需求及回覆時間限制下之資料儲存與維護策略;Determination of Materialized View Selection and Maintenance Policy with Stochastic Query and Response Time Constraints in Column-based Data Warehouse System	葉亭佑; Yeh, Ting-Yu
2017-07-24	機台可用區間限制求最小化總完工時間之平行機台排程問題;Identical Parallel Machine Scheduling with Machine Availability Constraint to Minimize Total Completion Time	鄒永瑜; Tsou, Yung-Yu
2017-07-19	晚期非小細胞肺癌患者使用標靶藥物與其他口服藥物交互作用之存活分析;Survival analysis of target drugs and other oral drugs in patients with advanced non-small cell lung cancer	陳則穎; Chen, Tse-Ying
2017-07-19	越南電子工業逆向物流：案例研究;Reverse Logistics in the Electronic Industry of Vietnam: a Case Study	陳氏芳蘭; lan, Tran Thi Phuong
2017-07-17	以基因演算法規劃啤酒釀造排程;Applying Genetic Algorithm to Schedule Brewery Production	裴春全; Toan, Bui Xuan
2017-07-14	The Optimal Pricing Strategy with Bayesian Updating in the Dual Channel	陳力維; Chen, Li-Wei
2017-07-13	高速公路服務區電動充電站之設址問題探討;Determination of Charging Station Locations in Highway Service Areas	鄭竹軒; Cheng-Chu-Shuan
2017-07-12	太陽能發電與儲能之最佳容量配置 －以都會區充電站為例;Optimal Capacity Allocation for Solar Power Generation and Storage - A Case of Urban Charging Station	王晨庭; Wang, Chen-Ting
2017-07-12	以禁忌搜尋法為電動車共乘機制規劃其途程;Using Tabu Search to Solve Electric Vehicle Routing Problems for Carpool Mechanism	廖文町; Liao, Wen-Ting
2017-07-12	考慮最大人口覆蓋率之太陽能公共充電站設址問題;Locating Solar Powered Public Charging Stations to Achieve Maximum Population Coverage	焦心薇; Chiao, Hsin-Wei
2017-07-12	照護偏鄉慢性病患之醫療人員配置;Medicare Staff Assignment for Patients with Chronic Illnesses in Remote Areas	田雅菁; Tien, Ya-Ching
2017-07-11	應用蟻群演算法求解3D列印之適應式切層;Applying ant colony optimization to adaptive slicing for rapid prototyping	洪瑋成; Hung, Wei-Cheng
2017-07-04	探討製造商處理電子廢棄物的回收利潤與成本之逆物流應用;Explore the manufacturer disposes of e-waste under recycling profit and recycling cost of reverse logistics applications	許博翔; Hsu, Po-Hsiang
2017-07-03	在多國市場新品與再製品之訂價決策;Pricing strategies for managing new and remanufactured products in the multi-national markets.	巫宜珊; Wu, Yi-Shan
2017-06-28	以安全為核心的醫療產品生命週期管理 -以電動輪椅為例;Safety-based Product Lifecycle Management of Medical Devices – Electric Wheelchair as an example	方德恩; Fang, Te-En
2017-06-28	車用鉛蓄電池回收與再利用研究;The study of automotive lead-acid battery recycling and reuse	郭育菁; Kuo, Yu-Ching
2017-06-28	電商主導的協同設計與協同供應—以智能家居為例	黃夢靈; MENGLING, HUANG
2017-06-26	一整合式方法以開發對環境友善的消費性電子產品;An Integrated Method for the Development of Environment-Friendly Consumer Electronics	羅偉綸; Lo, Wei-Lun
2017-06-26	第四方物流決策支援系統 - 系統塑模與模組化架構;A Modeling and Modularization Framework of the 4th Party LSP′s Decision Support System	張仲鈞; CHANG, CHUN-CHUNG
2017-06-26	第四方物流訂單管理-運送流程模擬與作業成本分析;The 4th Party LSP′s Order Management with Logistic Process Simulation and Activity-based Costing	郭家佑; Kuo, Chia-Yu

顯示項目201-250 / 760. (共16頁) << < 1 2 3 4 5 6 7 8 9 10 > >> 每頁顯示[10|25|50]項目