Siblings Research Project [67/67] journal & Dissertation [897/897] retired tests [328/328] Collection Statistics Item counts issued in 3 years: 343(11.83%) Items With Fulltext: 2899(100.00%) Download counts of the item Download times greater than 0: 2899(100.00%) Download times greater than 100: 2405(82.96%) Total Bitstream Download Counts: 1492051(73.69%) Last Update: 2024-11-15 09:43 Top Upload Loading... Top Download Loading... Recent Submissions 一種簡易旋轉式LED曝光裝置的設計與實作 噴嘴外形對超音波輔助噴水效應之探討;Research on the E... 磁場輔助電化學加工法於不銹鋼陣列微孔拋光之研究;Research on... 微細片狀電極結合超音波輔助電化學放電加工於石英玻璃加工微槽之研究;In... 陰離子交換膜水電解單元之傳輸現象分析;Analysis of tran... 鎳鈦記憶合金電極應用於不鏽鋼彎管內表面電化學拋光之研究;Researc... 混氣放電線切割加工 N-Type 單晶碳化矽之研究;Research ... 液體輔助超短脈衝雷射薄石英晶圓微鑽孔研究;Research on Li... 以超短脈衝雷射內部刻畫技術實現高品質裂面和高效石英晶圓切割探討;Exp... 基於聚焦成形技術之藍寶石玻璃孔洞自動化量測系統開發;Developme...

Jump to a point in the index: (Choose year) 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1985 1980 1975 1970 1960 1950 (Choose month) January February March April May June July August September October November December Or type in a year:

Ordering With Most Recent First Show Oldest First

Showing items 301-350 of 2899. (58 Page(s) Totally) << < 2 3 4 5 6 7 8 9 10 11 > >> View [10|25|50] records per page

Date	Title	Authors
2022-07-29	壓配合應力對於矯正釘植入齒槽骨之初期穩定度影響	郭釜瑜; KUO, FU-YU
2022-07-29	離岸風力機塔架疲勞裂縫成長分析	黃宣凱; Huang, Hsuan-Kai
2022-07-28	人工智慧應用於雷射切割矽鋼片之品質預測與閉迴路控制;Artificial Intelligent Based Approaches for Quality Prediction and Closed Loop Control in Laser Cutting of Electrical Steel Sheet	阮庭四; Nguyen, Dinh Tu
2022-07-27	連續柴氏長晶過程中三坩堝熱傳與質傳的數值模擬;Numerical simulation of heat and mass transfer during continuous CZ crystal growth with triple crucible	黎俊賢; Li, Chun-Hsien
2022-07-27	酸蝕刻清洗槽中晶圓表面平坦度之數值模擬;Numerical Simulation of Wafer Surface Flatness in Acid Etching Cleaning Tank	陳彥任; CHEN, YEN-JEN
2022-07-26	方形侵入物形狀縱橫比對垂直振動顆粒床內分離現象之影響	吳家榮; Wu, Chia-Jung
2022-07-25	柴氏法生長8吋矽單晶之V/G值與熱應力以及參雜物對缺陷影響之數值模擬	黃品皓; Huang, Pin-Hao
2022-07-25	發展格點與元素間之交錯網格方法以消除多孔彈性力學之偽震盪問題	林宇晨; Lin, Yu-Chen
2022-07-25	應用阻尼顆粒於馬達減速機進行轉子動平衡校正及結構振動抑制之實驗研究;An Experimental Study on Dynamic Balancing of Motor Rotor and Structural Vibration Attenuation for Motor Reducers with Damping Particles	柯妮佑; Ke, Ni-You
2022-07-21	步進馬達伺服控制驅動器設計改良及校正;Design Improvement and Calibration of Stepper Motor Servo Control Driver	孔崇維; Kung, Chung-Wei
2022-07-21	基於二維動態訊號分析技術之滾珠螺桿預壓失效監測暨診斷研究	蔡政良; Tsai, Cheng-Liang
2022-07-21	邊緣運算用單板電腦及函式庫開發;Development of library and device for edge computing purpose	劉文浩; Liu, Wen-Hao
2022-07-21	邊緣運算攝影機原型開發;Edge computing camera prototype development	林志陽; Lin, Zhih-Yang
2022-07-20	以鑲刃式刀盤進行螺桿轉子成形銑削之解析數學模型建立與實驗驗證;Analytical modeling and experimental verification of the screw rotor milling utilizing the forming cutter with inserted blades	明智; Arifin, Achmad
2022-07-20	自動化分解薄殼CAD模型殼本體之增強演算法發展	方聲翔; Fang, Sheng-Hsiang
2022-07-19	B-rep模型凸起特徵辨識及分解技術發展	吳添瑜; Wu, Tien‑Yu
2022-07-19	CAD模型混接面、虛擬環及孔洞特徵辨識技術發展	王培懿; Wang, Pei-Yi
2022-07-19	薄殼 CAD 模型之內外面類型辨識技術發展	黃羿中; Huang, Yi-Zuang
2022-07-18	金屬注射成型隨形冷卻通道模具設計與製造;CONFORMAL COOLING CHANNEL MOLD DESIGN AND MANUFACTURE FOR METAL INJECTION MOLDING	高光明; Sang, Cao
2022-07-18	應用於波導式擴增實境裝置之擴瞳成像均勻化技術的研究	蘇奕瑋; Su, Yi-Wei
2022-07-05	以可卸式PN接面對矽晶進行陽極氧化之研究;Investigation of Anodization of Silicon by Detachable PN Junction	莊淨茹; Chuang, Jing-Ru
2022-07-05	微波化學強化碳化矽表面拋光之研究;Study on Surface Polishing of Silicon Carbide Enhanced by Microwave Chemistry	陳歆; Chen, Hsin
2022-06-21	使用面投影微立體光固化技術開發卡匣式陶瓷基板生胚製造系統;Development of Cassette-type Production System for Green Ceramic Substrate by Projection Micro Stereolithography Technology	江紹瑜; Jiang, Shao-Yu
2022-06-15	六吋平面反射鏡片撓性支撐結構設計與實驗驗證;Design and Experimental Validation of Flexure Mounts for a Six-Inch Flat Mirror	劉晢彥; Liu, Zhe-Yan
2022-06-15	石墨烯的霍爾效應感測器應用於快速且無標記DNA之研究;The study of graphene-based Hall-effect biosensors applied to rapid and label-free DNA	吳緯振; Wu, Wei-Cheng
2022-05-23	連續波近紅外雷射光之雷射玻璃彎曲技術研發;A New Laser Glass Bending Approach Based on Continuous Wave Near-infrared Laser	廖韡翔; Liao, Wei-Xiang
2022-05-09	超音波輔助電泳沉積拋光鐵基金屬玻璃放電面之研究;The Study of EDMed Surface of the Fe-based Metallic Glass Polishing by Ultrasonic Vibration-assisted Electrophoretic Deposition	林琴南; Lin, Cin-Nan
2022-05-04	多通道慣性感測步態參數分析改善暨驗證並於下肢義肢穿戴者臨床收案研究;Improvement and validation of multi-channel inertia measurement and gait parameters analysis, and the study of its use on lower limb prosthesis wearers	徐瑞育; Hsu, Jui-Yu
2022-05-04	兩階複合式行星齒輪機構設計以及性能與疲勞測試;Design as well as Performance and Fatigue Test of Two-stage Compound Planetary Gear Drives	倪瑋杰; Ni, Wei-Chieh
2022-04-25	凝固裂紋敏感度的新型評估方法;New-type Evaluation Method for Solidification Cracking Susceptibility	劉興穎; Liu, Hsing-Ying
2022-04-15	使用濕式蝕刻後處理輔助之雷射藍寶石通孔研究;Research on Laser Sapphire Vias Using Wet Etch Post-processing	蔣劭威; Chiang, Shao-Wei
2022-04-15	雷射選擇圖案與無電鍍銅沉積應用於鋁矽酸玻璃基板之金屬化;Laser Selective Patterning and Electroless Copper Depostion for Metallization of Aluminosilicate Glass Substrate	吳冠廷; Wu, Guan-Ting
2022-02-21	以資料分散式服務發展智慧產品與其系統之研究;Research on the Development of Intelligent Product and Systems with Data Distribution Service	呂弘基; Lu, Hong-Ji
2022-01-27	探討氣體反壓控制技術下奈米碳管複合材料於超臨界微細發泡射出成型之泡體結構研究;Study of Foaming Morphology in Microcellular Injection Molded MWCNT Composites under Gas Counter Pressure	黃御珉; Huang, Yu-Min
2022-01-26	鉍摻雜至La0.6Sr0.4Co0.2Fe0.8O3 作為質子傳導型SOFC陰極之可行性研究;Bismuth doped La0.6Sr0.4Co0.2Fe0.8O3 as cathode for proton-conducting solid oxide fuel cells	成昕; Cheng, Hsin
2022-01-25	俯臥式擴散光學造影仿體驗證— 彈性光通道/雙波長/同步多頻	張皓喆; HAO-CHE, CHANG
2022-01-24	壓力效應對奈秒重覆脈衝放電引燃機率之影響;The Effect of Pressure on The Ignition Probability of Nanosecond Repetitive Pulse Discharge	石泰光; Shih, Tai-Guang
2022-01-21	超音波與磁場複合輔助遮罩式電化學加工微孔陣列之研究;A Study on Ultrasonic combined Magnetic Field assisted Through-Mask Electrochemical Machining of Micro-hole Arrays	林孟威; Lin, Meng-Wei
2022-01-19	DOpIm：擴散光學造影軟體系統	李柏廷; Li, Bo-Ting
2022-01-19	應用阻尼顆粒於旋轉機械之振動抑制及動平衡設計;Vibration Suppression and Dynamic Balance Design for Rotating Machines with Damping Particles	王譯徵; Wang, I-Cheng
2022-01-14	組織工程用雷射掃描之路徑導引式噴頭研發;Development of Path Guiding Nozzle with Laser Scanning Manner for Tissue Engineering Applications	楊凱甯; Yang, Kai-Ning
2022-01-14	組織工程應用之平面與旋轉兩用式三維生物列印機開發;Development of Planar/Rotary Three-dimensional Bioprinter for Tissue Engineering Applications	陳柏任; Chen, Bo-Ren
2022-01-12	氮化鋁/氮化鋁粗糙面鍵合:以氧電漿強化毛細作用;Aluminum nitride/aluminum nitride rough surface wafer bonding: use of oxygen plasma to enhance capillary action	粘少銘; Nien, Shao-Ming
2021-12-30	以多體動力學與離散元素法雙向耦合模擬探討具阻尼顆粒機構的能量損失機制	翁健紘; Weng, Chien-Hung
2021-12-28	四點接觸軸承負載分析;Load Analysis of Four Point Contact Ball Bearings	連庭緯; Lien, Ting-Wei
2021-12-21	二維半導體黑磷烯之穩定性研究與其在電晶體及新興記憶體的元件應用;Stabilization of 2D Semiconductor Black Phosphorus for the Application in the Field Effect Transistor and Emerging Memory	謝玉玲; Hsieh, Yu-Ling
2021-12-21	大型薄壁四點接觸旋轉軸承之結構動靜態分析;Static and Dynamic Structural Analysis of a Large Thin-walled Four-Point Slewing	傅林立; Fu, Lin-Li
2021-11-12	應用實驗設計方法探討射出成品內部比容差異 對於體積收縮之預測;Applying experimental design to predict volumetric shrinkage of injection molded part by means of the specific volume difference	林彥宇; Lin, Yen-Yu
2021-11-12	應用類神經網路與實驗設計法預測與優化射出成型試片之收縮率;Shrinkage prediction of injection molded specimen by using artificial neural network and optimization with experimental design	蔡宜璋; Tsai, I-Chang
2021-10-28	基於消費級深度相機之器械追蹤系統開發;Development of Instrument Tracking System Based on Consumer-grade Depth Camera	鄭柏暐; Cheng, Po-Wei

Showing items 301-350 of 2899. (58 Page(s) Totally) << < 2 3 4 5 6 7 8 9 10 11 > >> View [10|25|50] records per page