"Lin,CK"的相关文件
回到依作者浏览
显示 67 项.
类别 |
日期 |
题名 |
作者 |
档案 |
[機械工程學系] 期刊論文 |
2011 |
Dynamic strain aging in low cycle fatigue of duplex titanium alloys |
Lin,YH; Hu,KH; Kao,FH; Wang,SH; Yang,JR; Lin,CK |
|
[機械工程學系] 期刊論文 |
2011 |
Effect of rare earth elements addition on microstructures and mechanical properties of A356 alloy |
Tsai,YC; Chou,CY; Jeng,RR; Lee,SL; Lin,CK |
|
[機械工程學系] 期刊論文 |
2011 |
Effect of trace Ce addition on the microstructures and mechanical properties of A356 (AL-7SI-0.35 Mg) aluminum alloys |
Tsai,YC; Lee,SL; Lin,CK |
|
[機械工程學系] 期刊論文 |
2011 |
Effects of cyclic hydriding-dehydriding reactions of Mg(2)Ni alloy on the expansion deformation of a metal hydride storage vessel |
Lin,CK; Huang,SM; Jhang,YH |
|
[機械工程學系] 期刊論文 |
2011 |
High-temperature mechanical properties of a solid oxide fuel cell glass sealant in sintered forms |
Chang,HT; Lin,CK; Liu,CK; Wu,SH |
|
[機械工程學系] 期刊論文 |
2011 |
High-temperature tensile and creep properties of a ferritic stainless steel for interconnect in solid oxide fuel cell |
Chiu,YT; Lin,CK; Wu,JC |
|
[機械工程學系] 期刊論文 |
2010 |
Effect of Spinning Deformation Processing on the Wear and Corrosion Properties of Al-7Si-0.3Mg Alloys |
Cheng,YC; Lin,CK; Tan,AH; Lin,JC; Lee,SL |
|
[機械工程學系] 期刊論文 |
2010 |
Effects of crystallization on the high-temperature mechanical properties of a glass sealant for solid oxide fuel cell |
Chang,HT; Lin,CK; Liu,CK |
|
[機械工程學系] 期刊論文 |
2010 |
Structure and hydrogen storage properties of Mg(2)Cu(1-x)Ni(x) (x=0-1) alloys |
Hsu,FK; Hsua,CW; Chang,JK; Lin,CK; Lee,SL; Jiang,CE |
|
[機械工程研究所] 期刊論文 |
2009 |
Effect of trace La addition on the microstructures and mechanical properties of A356 (Al-7Si-0.35Mg) aluminum alloys |
Tsai,YC; Chou,CY; Lee,SL; Lin,CK; Lin,JC; Lim,SW |
|
[機械工程研究所] 期刊論文 |
2009 |
High-temperature mechanical properties of a glass sealant for solid oxide fuel cell |
Chang,HT; Lin,CK; Liu,CK |
|
[機械工程研究所] 期刊論文 |
2009 |
Thermal stress analysis of planar solid oxide fuel cell stacks: Effects of sealing design |
Lin,CK; Huang,LH; Chiang,LK; Chyou,YP |
|
[機械工程研究所] 期刊論文 |
2005 |
Creep rupture of lead-free Sn-3.5Ag and Sn-3.5Ag-0.5Cu solders |
Lin,CK; Chu,DY |
|
[機械工程研究所] 期刊論文 |
2005 |
Effect of strain rate on high-temperature low-cycle fatigue of 17-4 PH stainless steels |
Wu,JH; Lin,CK |
|
[機械工程研究所] 期刊論文 |
2004 |
Fatigue behavior of AISI 347 stainless steel in various environments |
Lin,CK; Lan,IL |
|
[機械工程研究所] 期刊論文 |
2004 |
High-temperature fatigue crack growth behavior of 17-4 PH stainless steels |
Hsu,KC; Lin,CK |
|
[機械工程研究所] 期刊論文 |
2003 |
Corrosion fatigue of austempered ductile iron |
Lin,CK; Yang,CH; Wang,JH |
|
[機械工程研究所] 期刊論文 |
2003 |
Influence of frequency on high-temperature fatigue behavior of 17-4 PH stainless steels |
Wu,JH; Lin,CK |
|
[機械工程研究所] 期刊論文 |
2003 |
Influence of high temperature exposure on the mechanical behavior and microstructure of 17-4 PH stainless steel |
Wu,JH; Lin,CK |
|
[機械工程研究所] 期刊論文 |
2002 |
Corrosion fatigue of precipitation-hardening martensitic stainless steel |
Lin,CK; Fan,WC; Tsai,WJ |
|
[機械工程研究所] 期刊論文 |
2002 |
Influence of heat treatment on fatigue crack growth of austempered ductile iron |
Lin,CK; Chang,CW |
|
[機械工程研究所] 期刊論文 |
2002 |
Tensile and fatigue properties of 17-4 PH stainless steel at high temperatures |
Wu,JH; Lin,CK |
|
[機械工程研究所] 期刊論文 |
2001 |
Environmental effects on fatigue crack growth in austempered ductile irons |
Lin,CK; Wang,JH |
|
[機械工程研究所] 期刊論文 |
2000 |
Corrosion fatigue behaviour of a 15Cr-6Ni precipitation-hardening stainless steel in different tempers |
Lin,CK; Tsai,WJ |
|
[機械工程研究所] 期刊論文 |
2000 |
Mean stress effects on low-cycle fatigue for a precipitation-hardening martensitic stainless steel in different tempers |
Lin,CK; Chu,CC |
|
[機械工程研究所] 期刊論文 |
1999 |
Low-cycle fatigue of austempered ductile irons at various strain ratios |
Lin,CK; Pai,YL |
|
[機械工程研究所] 期刊論文 |
1998 |
Corrosion fatigue behavior of 7050 aluminum alloys in different tempers |
Lin,CK; Yang,ST |
|
[機械工程研究所] 期刊論文 |
1998 |
Effects of highly stressed volume on fatigue strength of austempered ductile irons |
Lin,CK; Lee,WJ |
|
[機械工程研究所] 期刊論文 |
1997 |
High-cycle fatigue of austempered ductile irons in various-sized Y-block castings |
Lin,CK; Wei,JY |
|
[機械工程研究所] 期刊論文 |
1997 |
Low-cycle fatigue of austempered ductile irons in various-sized Y-block castings |
Lin,CK; Fu,CS |
|
[機械工程研究所] 期刊論文 |
1997 |
Size effect on thermal shock behavior of an alumina |
Lin,CK; Kuo,TC |
|
[機械工程研究所] 期刊論文 |
1997 |
Statistical analysis of size effects on time-dependent fracture of an alumina |
Lin,CK; Chen,WS |
|
[機械工程研究所] 期刊論文 |
1996 |
Influence of microstructure on the fatigue properties of austempered ductile irons .1. High-cycle fatigue |
Lin,CK; Lai,PK; Shih,TS |
|
[機械工程研究所] 期刊論文 |
1996 |
Influence of microstructure on the fatigue properties of austempered ductile irons .2. Low-cycle fatigue |
Lin,CK; Hung,TP |
|
[數學研究所] 期刊論文 |
2009 |
Mutually independent hamiltonian cycles for the pancake graphs and the star graphs |
Lin,CK; Tan,JJM; Huang,HM; Hsu,DF; Hsu,LH |
|
[數學研究所] 期刊論文 |
2009 |
The super spanning connectivity and super spanning laceability of the enhanced hypercubes |
Chang,CH; Lin,CK; Tan,JJM; Huang,HM; Hsu,LH |
|
[數學研究所] 期刊論文 |
2005 |
Mutually independent hamiltonian paths in star networks |
Lin,CK; Huang,HM; Hsu,LH; Bau,S |
|
[數學研究所] 期刊論文 |
2005 |
The super connectivity of the pancake graphs and the super laceability of the star graphs |
Lin,CK; Huang,HM; Hsu,LH |
|
[數學研究所] 期刊論文 |
2004 |
The super laceability of the hypercubes |
Chang,CH; Lin,CK; Huang,HM; Hsu,LH |
|
[數學研究所] 期刊論文 |
2004 |
Wide-sense nonblocking for symmetric or asymmetric 3-stage Clos networks under various routing strategies |
Chang,FH; Guo,JY; Hwang,FK; Lin,CK |
|
[電機工程研究所] 期刊論文 |
2005 |
BCB-bridged distributed wideband SPST switch using 0.25-mu m In0.5Al0.5As-In0.5Ga0.5As metamorphic HEMTs |
Lin,CK; Wang,WK; Chan,YJ; Chiou,HK |
|
[電機工程研究所] 期刊論文 |
2005 |
Performance enhancement by using the n(+)-GaN cap layer and gate recess technology on the AlGaN/GaN HEMTs fabrication. |
Wang,WK; Lin,PC; Lin,CH; Lin,CK; Chan,YJ; Chen,GT; Chyi,JI |
|
[電機工程研究所] 期刊論文 |
2005 |
Performance enhancement by using the n(+)-GaN cap layer and gate recess technology on the AlGaN-GaNHEMT fabrication |
Wang,WK; Lin,PC; Lin,CH; Lin,CK; Chan,YJ; Chen,GT; Chyi,JI |
|
[電機工程研究所] 期刊論文 |
2005 |
Photonic crystal directional couplers formed by InAlGaAs nano-rods |
Chen,CC; Chen,CY; Wang,WK; Wang,WK; Huang,FH; Lin,CK; Chiu,WY; Chan,YJ |
|
[電機工程研究所] 期刊論文 |
2005 |
Power performance enhancement of metamorphic In0.3Al0.7As/In0.45Ga0.55As HEMTs using pseudomorphic channel design |
Lin,CK; Wu,JC; Chan,YJ; Wu,JS; Pan,YC; Tsai,CC; Lai,JT |
|
[電機工程研究所] 期刊論文 |
2005 |
Transient pulsed analysis on GaNHEMTs at cryogenic temperatures |
Lin,CH; Wang,WK; Lin,PC; Lin,CK; Chang,YJ; Chan,YJ |
|
[電機工程研究所] 期刊論文 |
2004 |
A new self-defined empirical large-signal model for enhancement-mode AlGaAs/InGaAs pHEMTs |
Wang,WK; Lin,CK; Wu,CC; Li,YJ; Chan,YJ |
|
[電機工程研究所] 期刊論文 |
2004 |
K-band monolithic InGaP-InGaAs DCFET amplifier using BCB coplanar waveguide technology |
Chiu,HC; Yang,SC; Lin,CK; Hwu,MJ; Chiou,HK; Chan,YJ |
|
[電機工程研究所] 期刊論文 |
2004 |
Low damage, Cl-2-based gate recess etching for 0.3-mu m gate-length AlGaN/GaN HEMT fabrication |
Wang,WK; Li,YJ; Lin,CK; Chan,YJ; Chen,GT; Chyi,JI |
|
[電機工程研究所] 期刊論文 |
2004 |
Low-k BCB passivation on AlGaN-GaN HEMT fabrication |
Wang,WK; Lin,CH; Lin,PC; Lin,CK; Huang,FH; Chan,YJ; Chen,GT; Chyi,JI |
|
[電機工程研究所] 期刊論文 |
2004 |
Performance enhancement by the In0.65Ga0.35As pseudomorphic channel on the In0.5Al0.5As metamorphic buffer layer |
Lin,CK; Wu,JC; Wang,WK; Chan,YJ; Wu,JS; Pan,YC; Tsai,CC; Lai,JT |
|
[電機工程研究所] 期刊論文 |
2004 |
Single step electron-beam lithography for asymmetric recess and gamma gate in high electron mobility transistor fabrication |
Lin,CK; Wang,WK; Hwu,MJ; Chan,YJ |
|
[電機工程研究所] 期刊論文 |
2003 |
0.2-mu m gate-length InGaP-InGaAs DCFETs for C-band MMIC amplifier applications |
Chiu,HC; Yang,SC; Lin,CK; Hwu,MJ; Chan,YJ |
|
[電機工程研究所] 期刊論文 |
2003 |
A modified scalable large-signal rf model for quasi-enhancement-mode AlGaAs/InGaAs pHEMTs |
Wang,CW; Lin,CK; Yang,SC; Chan,YJ; Gan,TH |
|
[電機工程研究所] 期刊論文 |
2003 |
A novel 1.55 mu m dual-mode SSO/MSM photodetector |
Lin,SM; Huang,FH; Lin,CK; Yang,SC; Lin,YH; Yu,YC; Chan,YJ |
|
[電機工程研究所] 期刊論文 |
2003 |
Submicron RIE recessed InGaP/InGaAs doped-channel FETs |
Yang,SC; Chiu,HC; Hwu,MJ; Wang,WK; Lin,CK; Chan,YJ |
|
[電機工程研究所] 期刊論文 |
2002 |
A new empirical large-signal model for enhancement-mode AlGaAs/InGaAs pHEMTs |
Lin,CK; Wang,WK; Chan,YJ |
|
[電機工程研究所] 期刊論文 |
2002 |
Extended radio frequency nonlinear model for power prediction of AlGaAs/InGaAs pseudomorphic high electron mobility transistors |
Lin,CK; Chan,YJ |
|
[資訊工程研究所] 期刊論文 |
1995 |
CONFUSION SET RECOGNITION OF ONLINE CHINESE CHARACTERS BY ARTIFICIAL-INTELLIGENCE TECHNIQUE |
FAN,KC; LIN,CK; CHOU,KS |
|
[資訊工程研究所] 期刊論文 |
1994 |
KNOWLEDGE MODEL-BASED APPROACH IN RECOGNITION OF ONLINE CHINESE CHARACTERS |
CHOU,KS; FAN,KC; FAN,TI; LIN,CK; JENG,BS |
|
[資訊工程研究所] 期刊論文 |
1993 |
ONLINE RECOGNITION BY DEVIATION-EXPANSION MODEL AND A-ASTERISK ALGORITHM-BASED MATCHING |
LIN,CK; FAN,KC; LEE,FTP |
|
[資訊工程研究所] 期刊論文 |
1993 |
ONLINE RECOGNITION BY DEVIATION-EXPANSION MODEL AND DYNAMIC-PROGRAMMING MATCHING |
LIN,CK; FAN,KC; LEE,FTP |
|
[材料科學與工程研究所 ] 期刊論文 |
2011 |
Effects of Ni addition on hydrogen storage properties of Mg(17)Al(12) alloy |
Lee,SL; Hsu,CW; Hsu,FK; Chou,CY; Lin,CK; Weng,CW |
|
[材料科學與工程研究所 ] 期刊論文 |
2011 |
Influence of Mg(3)AlNi(2) content on the cycling stability of Mg(2)Ni-Mg(3)AlNi(2) hydrogen storage alloy electrodes |
Lee,SL; Hsu,FK; Chen,WC; Lin,CK; Lin,JC |
|
[材料科學與工程研究所 ] 期刊論文 |
2010 |
Effect of Mg(3)MnNi(2) on the electrochemical characteristics of Mg(2)Ni electrode alloy |
Hsu,FK; Lin,CK; Lee,SL; Lin,CY; Bor,HY |
|
[化學研究所] 期刊論文 |
2009 |
Effect of Ground-State Twisting on the trans -> cis Photoisomerization and TICT State Formation of Aminostilbenes |
Yang,JS; Lin,CK; Lahoti,AM; Tseng,CK; Liu,YH; Lee,GH; Peng,SM |
|
[化學研究所] 期刊論文 |
2009 |
Pentiptycene-Derived Oligo(p-phenyleneethynylene)s: Conformational Control, Chain-Length Effects, Localization of Excitation, and Intrachain Resonance Energy Transfer |
Yang,JS; Yan,JL; Lin,CK; Chen,CY; Xie,ZY; Chen,CH |
|
|