鄰近類別 研究計畫 [67/67] 期刊論文 [897/897] 考古題 [328/328] 類別統計 近3年內發表的文件: 343(11.83%) 含全文筆數: 2899(100.00%) 文件下載次數統計 下載大於0次: 2899(100.00%) 下載大於100次: 2414(83.27%) 檔案下載總次數: 1504029(73.72%) 最後更新時間: 2024-11-24 12:40 上傳排行 資料載入中..... 下載排行 資料載入中..... 最近上傳 一種簡易旋轉式LED曝光裝置的設計與實作 噴嘴外形對超音波輔助噴水效應之探討;Research on the E... 磁場輔助電化學加工法於不銹鋼陣列微孔拋光之研究;Research on... 微細片狀電極結合超音波輔助電化學放電加工於石英玻璃加工微槽之研究;In... 陰離子交換膜水電解單元之傳輸現象分析;Analysis of tran... 鎳鈦記憶合金電極應用於不鏽鋼彎管內表面電化學拋光之研究;Researc... 混氣放電線切割加工 N-Type 單晶碳化矽之研究;Research ... 液體輔助超短脈衝雷射薄石英晶圓微鑽孔研究;Research on Li... 以超短脈衝雷射內部刻畫技術實現高品質裂面和高效石英晶圓切割探討;Exp... 基於聚焦成形技術之藍寶石玻璃孔洞自動化量測系統開發;Developme...

跳至: (選擇年份) 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1985 1980 1975 1970 1960 1950 (選擇月份) January February March April May June July August September October November December 或輸入年份:

由新到舊排序 由最舊的開始

顯示項目501-550 / 2899. (共58頁) << < 6 7 8 9 10 11 12 13 14 15 > >> 每頁顯示[10|25|50]項目

日期	題名	作者
2020-08-18	液珠預變形對其潤濕性與熱毛細力趨動 之運動行為分析;Analysis of pre-deformation of liquid droplet on its wettability and thermocapillary movement	邱穎波; Chiu, Yin-Po
2020-08-18	超音波輔助磨削AGC玻璃加工之研究;An investigation of ultrasonic assisted grinding on AGC glass	張竣傑; Chang, Jun-Jie
2020-08-18	運用多層感知器於提升組織工程應用的生物支架品質之研究;A Research for Quality Improvement of Bio-Scaffold for Tissue Engineering Applications by Using Multilayer Perceptron	姜孟竹; Jiang, Meng-Jhu
2020-08-17	多噴頭置換模組開發與混合式三維生物列印之研究;Development of Multi-nozzle Exchange Module and Research on Hybrid Three-dimensional Bioprinting	曾偉智; Tseng, Wei-Chih
2020-08-13	五元富鋁低密度高熵合金之微結構觀察與其機械性質研究;Microstructure and mechanical properties of low density Al-rich quinary high entropy alloys	林彥廷; Lin, Yen-Ting
2020-08-13	利用改良液相剝離法提高銻烯合成產率與均質性之研究;High yield and uniformity of few-layer antimonene by modified liquid-phase exfoliation	陳威霖; Chen, Wei-Lin
2020-08-13	雷射積層製造用高韌性鐵基金屬玻璃粉末與其工件性質之研究;Fe-based metallic glass powder with high fracture toughness preparation and additive manufacturing workpiece properties analysis	朱家銓; Chu, Chia-Chuan
2020-08-13	離岸風力機單樁基座疲勞分析;Fatigue Analysis of Monopile Foundation for Offshore Wind Turbine	李易軒; Li, Yi-Syuan
2020-08-11	石墨烯之複合電極於全固態纖維式微型超電容的研究;Flexible all-solid-state Microsupercapacitors based on Carbon clothes fiber electrode coated with ECG via electrophoretic deposition (EPD)	曾信尹; Tseng, Sin-Yin
2020-08-11	固態氧化物燃料電池金屬連接板與硬焊接合件機械特性及應力分析;Mechanical Properties and Stress Analysis for the Joint of Metallic Interconnect and Braze Sealant in Solid Oxide Fuel Cell	曾宥維; Tseng, Yu-Wei
2020-08-11	空調壓縮機干涉配合應力與優化分析;Stress Analysis and Optimization for Interference Fitting in Air-Conditioning Compressor	張棋; Jhang, Chi
2020-08-11	製程參數對雷射積層製造AISI 420不銹鋼工件機械性質之影響;Effects of Process Parameters on Mechanical Properties of AISI 420 Stainless Steel Fabricated by Laser Additive Manufacturing	楊璽懷; Yang, Xi-Huai
2020-08-10	球上平衡機器人;The Balancing of Ballbot	陳子蔚; Chen, Tzu-Wei
2020-08-10	微放電結合電泳拋光於鐵基金屬玻璃微孔加工之研究;Study on Fe-based metallic glass micro hole machining by using micro-EDM combined with electrophoretic deposition polishing	許世宥; Hsu, Shih-yu
2020-08-05	有機金屬化學氣相沉積 P型GaN薄膜摻雜製程數值分析;Numerical Analysis of P-type GaN Thin Film Doping Process in Metal Organic Chemical Vapor Deposition	陳泓亦; Chen, Hung-Yi
2020-08-05	應用反應曲面法進行鏡筒真圓度之射出成型參數優化;Applying response surface methodology to optimization of injection molding parameters for the roundness of lens barrel	顏菽澤; Yan, Shu-Ze
2020-08-03	應用銅基觸媒逆流管式填充床反應器之甲醇水蒸氣重組分析;Analysis of counter-flow tubular packed bed reactor with Cu-based catalysts for methanol steam reforming	琪琪; Kusumastuti, Rizky
2020-07-30	Inconel 718之基層製造參數最佳化研究	鄭景元; Zheng, Jing-Yuan
2020-07-30	工業機械沖床正齒輪之熱處理實驗與數值研究;Numerical and experiment investigation of the heat-treated spur gear for application in the industrial mechanical press	沙伊曼; Saputro, Imang Eko
2020-07-30	以離散元素法電腦模擬探討顆粒體在不同置入物儲槽中的傳輸性質與內部性質;Numerical Study on Transport and Internal Properties of Granular Materials in Cylindrical Silos with Different Inserts Using Discrete Element Modelling	郭庭君; Kuo, Ting-Chun
2020-07-30	批量繞捲方法於化學氣相沉積法合成大面積單層與多層石墨烯之研究;The synthesis high yield monolayer and multilayer graphene via batch to batch chemical vapor deposition	林智隆; Lin, Zing-Long
2020-07-30	使用計算流體力學模擬小型風力機葉片旋轉效應	郭耀仁; Kuo, Yau-Reb
2020-07-30	熱處理對Ti-6Al-4V真空硬銲件微觀結構及機械性質之影響	廖奕誠; Liao, Yi-Cheng
2020-07-30	擠壓絲攻刀具幾何特徵之最佳化分析	簡威容; Jian, Wei-Rong
2020-07-30	離岸風力機塔架在正常發電下之疲勞分析;nono	劉岳群; Liu, Yueh-Chun
2020-07-29	12英吋矽晶圓化學氣相沉積矽磊晶製程熱輻射加熱系統之數值分析;Numerical Analysis of Heat Radiation Heating System for 12-inch Silicon Wafer Chemical Vapor Deposition Silicon Epitaxial Process	李仁傑; Li, Jen-Chieh
2020-07-29	Boss特徵之結構化實體網格自動化建構技術發展	張耀中; Chang, Yao-Chung
2020-07-29	PVT法生長單晶氮化鋁之腔體熱場數值分析;Numerical analysis of PVT method for thermal field in AlN single crystal growth	吳昇儒; Wu, Sheng-Ju
2020-07-29	Sensing and actuation with interpenetrated polymers, application in microrobotics	彭迦儒; Peng, Chia-Ju
2020-07-29	具仿生微奈米結構之壓電靜電混能式自供電感測器與人體生物力學監測裝置;Self-Powered hybrid multifunctional sensor with biomimetic micro/nano-textured structure for human biomechanical monitoring device	盧業昕; Lu, Yeh-Hsin
2020-07-29	拋光方法對塑膠微流控裝置之表面優化和結構的影響;Optimization of surface polishing method and its structure effects for polymer microfluidic device	吳政坤; WU, ZHENG-KUN
2020-07-29	區域控制變形精密鍛造技術開發與散熱片及複雜曲面醫用刀具之應用研究;Precision forging of heat spreader and complex- curved medical cutter through the controllable deformation zone	吳偉立; Wu, Wei-Li
2020-07-29	薄殼零件薄殼本體之結構化實體網格自動建構技術發展	吳家瑋; Wu, Jia-Wei
2020-07-28	以有限元素法與反應曲面法分析兩點增量成形	劉家宏; Liu, Chia-Hung
2020-07-28	考量留磨量之多軸CNC強力刮齒數學模型建立及加工模擬;Mathematical Modelling and Cutting Simulation of Multi-axis CNC Power Gear Skiving with Grinding Allowance	周杰; Jie, Zhou
2020-07-28	低溫三維列印之溫度調節演算法用於提升沉積面之垂直溫度均勻性;Thermoregulation Algorithm for Increasing Vertical Temperature Uniformity of Deposition Surface in Low Temperature 3D Printing Technology	邱景棟; Chiou, Ching-Tung
2020-07-28	金屬粉末射出成型隨形水路模具設計製造與成型分析	周韋辰; Zhou, Wei-Chen
2020-07-28	基於蝸桿創成磨齒加工之齒面磨削紋理模擬及控制方法;Machining simulation and Control Method of Ground Texture on Gear Tooth Surface Based on Continuous Generating Gear Grinding	蔡宗鳴; Tsai, Tsung-Ming
2020-07-28	塑膠射出成型之薄殼件可製造化分析技術研究	陳冠融; CHEN, GUAN-RONG
2020-07-28	應用於焦電型紅外線感測器的多焦點菲涅爾透鏡之設計技術研究	林哲以; Lin, Che-I
2020-07-24	內嚙合珩磨加工圓柱齒輪與螺桿轉子方法之 研究;A Study on Internal-Meshing Honing Methods of Cylindrical Gears and Screw Rotors	陳文決; QUYET, TRAN VAN
2020-07-24	以線性迴歸分析驗證射出成型縫合角與抗拉強度呈正相關;Using linear regression to validate the positive correlation between welding angle and tensile strength	徐紹翔; Hsu, Shao-Hsiang
2020-07-24	以複數特徵值分析浮動卡鉗動態之不穩定與噪音;Dynamic Instability Analysis of Floating Caliper Brake Based on Complex Eigenvalue Extraction: A Parametric Study of Low and High-Frequency Squeal	普德古; Prasetyo, Unggul Teguh
2020-07-24	基於光感三維生物列印之路徑導引式噴頭開發;Development of Path Guiding Nozzle for 3D Photocrosslinking-Based Bioprinting Technology	沈芳茹; Shen, Fang-Ru
2020-07-24	鎳基高速燃氣熔射塗層耐磨性能研究;Study on the Structures and Wear Behaviors of HVOF-Sprayed Ni-MoS2 Coatings	劉有量; Liu, Yu-Liang
2020-07-23	H-bot機構雷射加工控制之研究	徐翊芳; Hsu, Yi-Fang
2020-07-23	以有限元素法決定石英振盪器之共振特性;Determining the Resonance Characteristics of a Quartz Oscillator via the Finite Element Method	楊盈瑜; Yang, Ying-Yu
2020-07-23	利用不同造孔劑合成並分析具生物相容鈦鋯基金屬玻璃多孔醫用植入材;Synthesis and characterization of biocompatible TiZr-based bulk metallic glass foam using different space holders for bio-implant applications	阮帆泰; Nguyen, Van Tai
2020-07-23	微量Sb與熱處理對4Y32鋁合金微結構與磨耗性質之影響;Effects of trace Sb and Heat treatment on the Microstructures and Wear Properties of 4Y32 Aluminum alloy	熊振捷; Hsiung, Chen-Chieh
2020-07-23	微量鋯與冷加工對Al-8.3Zn-2.3Mg-2.4Cu鋁合金微結構與淬火敏感性影響;Effect of trace Zr and cold deformation on mechanical properties and quench sensitivity of Al-8.3Zn-2.3Mg-2.4Cu alloys	潘則銨; Pan, Tse-An

顯示項目501-550 / 2899. (共58頁) << < 6 7 8 9 10 11 12 13 14 15 > >> 每頁顯示[10|25|50]項目