English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78937/78937 (100%)
造訪人次 : 39422874      線上人數 : 575
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋

    子類別

    博碩士論文 [2809/2809]
    期刊論文 [897/897]
    考古題 [328/328]
    研究計畫 [67/67]

    社群統計


    近3年內發表的文件: 262(6.39%)
    含全文筆數: 4101(100.00%)

    文件下載次數統計
    下載大於0次: 4101(100.00%)
    下載大於100次: 3863(94.20%)
    檔案下載總次數: 2224430(5.00%)

    最後更新時間: 2024-09-01 00:17

    上傳排行

    資料載入中.....

    下載排行

    資料載入中.....

    RSS Feed RSS Feed
    跳至:
    或輸入年份:
    由新到舊排序 由最舊的開始

    顯示項目501-550 / 4101. (共83頁)
    << < 6 7 8 9 10 11 12 13 14 15 > >>
    每頁顯示[10|25|50]項目

    日期題名作者
    2020-04-08 109年機械工程研究所熱流組(丙組)-流體力學(含熱傳)-入學考試題 機械工程研究所熱流組
    2020-04-08 109年機械工程研究所熱流組(丙組)-熱力學-入學考試題 機械工程研究所熱流組
    2020-03-27 手持式電磁型態植體骨整合檢測裝置暨驗證;Design and Validation of Handheld Electromagnetic Type Detection Device for Implant Osseointegration 李偉豪; LEE, WEI-HAO
    2020-03-11 Development of Overlaying Welding Method using Hot-wire Laser Welding Method 林唯安; Lin, Wei-An
    2020-02-05 用於高熱通量電子元件之兩相蒸發冷卻系統 許瑜峰; Hsu, Yu-Feng
    2020-01-21 超音波輔助液中磨削鐵基金屬玻璃之研究;A Study on Ultrasonic Assisted Grinding of Fe-based Metallic Glass under Cutting Fluid 李承諭; Lee, Cheng-Yu
    2020-01-21 燃料電池觸媒開發與應用研究;Development and Application of Fuel Cell Catalysts 沈進添; Shen, Chin-Tien
    2020-01-17 多頻率同步驅動光源之三維頻域式擴散光學斷層造影數值計算研究 甘弘暐; Kan, Hong-Wei
    2020-01-15 脊椎手術用3D C-arm影像輔助機械臂導引系統之研發 陳忠昊; Chen, Zhong-Hao
    2020-01-14 顆粒體微觀熱傳與力學理論的基準測試;nono 孟令軒; Meng, Ling-Xuan
    2020-01-13 扁平管吸附床應用於低溫乾燥系統的研究分析 楊建裕
    2020-01-10 以氨和氫為燃料之加壓平板和鈕扣型固態氧化物燃料電池性能量測;Measurements of Pressurized Planar- and Button-type Solid Oxide Fuel Cells Using Ammonia and Hydrogen Fuels 趙健傑; Jhao, Jian-Jie
    2020-01-09 快速塑性成型(QPF)製程品質之精密度探討;Quality and Precision Investigation of QPF Process 鍾瑱諭; Chung, Chen-Yu
    2020-01-06 以液膜包覆微結構局部定義表面之液珠熱毛細運動分析;The thermocapillary motion of droplet on the surface defined by microstructure with prewetting liquid film 卓裕桓; Cho, Yu-Huan
    2020-01-06 冷媒R-245fa於氟化石墨烯表面改質鰭管之冷凝熱傳性能研究;Condensation Heat Transfer of Refrigerant R-245fa on Fluorinated Graphene Coating Fin-Tubes 陳禹霖; Chen, Yu-Lin
    2019-12-13 Design of a Five-Degrees of Freedom Statically Balanced Mechanism with Multi-Directional Functionality 趙子惟; Zhao, Zi-Wei
    2019-12-12 A Comparative Study of Conventional Spark Ignition and Nanosecond Repetitively Pulsed Discharge in Premixed Turbulent Combustion 阮明進; TIEN, NGUYEN MINH
    2019-12-09 修整型傘齒輪行星齒輪機構之負載分析;Loaded Tooth Contact Analysis of Planetary Bevel-Gear Sets with Flank Modification 何碩桓; Ho, Shuo-Huan
    2019-11-22 Helipoid齒輪接觸特性研究與最佳化分析;Tooth Contact Analysis and Optimization of Helipoid Gears 林以濤; TAO, LIN YI
    2019-11-22 高轉速正齒輪之多目標最佳化與動態特性分析;Multi-Objective Optimization and Dynamic Characteristics of A High-Speed Spur Gear Set 劉鴻志; Liu, Hung-Chih
    2019-11-18 高溫高壓汽油主要參考燃料層流和紊流燃燒速度量測與正規化分析;Measurement and Normalization of laminar and turbulent burning velocities of high temperature, high pressure premixed gasoline primary reference fuel flames 林彥廷; Lin, Yen-Ting
    2019-11-08 顆粒外形對顆粒體在滑坡道流動行為之影響及內部性質之探討 林昊勳; Lin, Hao-Hsun
    2019-11-06 高精度擺線齒輪誤差檢測之探討;Study on Inspection of High Precision Cycloid Gears 魏嘉生; Wei, Jia-Sheng
    2019-10-29 以離散元素法分析苗栗縣南庄鄉鹿湖山區之土石崩塌行為及內部性質之探討 陳宗佑; Chen, Chung-Yu
    2019-10-28 傳統骨板與解剖骨板對於固定Sanders II-B型跟骨骨折力學分析;Biomechanical analysis of conventional and anatomical calcaneal plates for fixing Sanders type II-B calcaneal fractures 曾品碩; Tseng, Pin-Shuo
    2019-10-15 電子零件浸焊製程之智能性不良率評估與異常診斷模型建構研究 張翊翔; ZHANG, YI-XIANG
    2019-10-08 軟性薄膜振動發電機 鄭守博; Cheng, Shou-Po
    2019-08-26 利用熱毛細作用與熱對流現象控制水液珠 在矽油表面上的移動行為分析;Analysis of water droplet migration on silicone oil surface controlled by thermocapillary and heat convection 鄧智仁; Teng, Chih-Jen
    2019-08-24 二氧化矽包覆鈣鈦礦量子點薄膜 暨擴散粒子之研究;The Study of Silica Coated Perovskite Quantum Dot Emission Film and Diffractive Particles 楊哲勛; Yang, Jer-Shiun
    2019-08-24 雷射積層製造不銹鋼工件機械特性分析;Mechanical Analysis of Laser Additive Manufacturing Builds of a Stainless Steel 沈鈴潔; Shen, Ling-Chieh
    2019-08-22 一種應用於大發光面積 LED燈具的複合型準直透鏡之研究;nine 楊婷婷; Yang, Ting-Ting
    2019-08-22 太陽能集熱百葉窗設計之研究 黃宥傑; Huang, Yu-Chieh
    2019-08-22 以計算流體力學結合排液容器法量測錫液之密度、黏度與表面張力係數;Using the Draining Vessel Method combined with Computational Fluid Dynamics to Measure the Density, Viscosity and Surface Tension of Tin 顏芷珊; Yen, Chih-Shan
    2019-08-22 以排液容器法量測液態錫的密度、黏度以及表面張力;Measuring the density、 surface tension and viscosity of a Tin fluid by the draining vessel method 江宗軒; CHIANG, TSUNG-HSUAN
    2019-08-22 利用光學元件實現陣列型結構光之研究 蔡聿凱; Tsai, Yu-Kai
    2019-08-22 計算流體力學模擬流率與濕潤性對徑向多孔介質指形流之影響;Computational Fluid Dynamic Simulation of Influence of Suction and Wettability on Viscous Fingering in Radial Porous Media 吳東育; Wu, Tung-Yu
    2019-08-22 異質多孔介質二相指形流之壓力變化特徵;Pressure Variation Characteristics of Two-phase Flow in Heterogeneous Porous Media 陳冠佑; Chen, Kuan-Yu
    2019-08-22 雷射加工機應用於微米元件轉印製程之研究;Study of Micro-device Transfer on a Pulsed Laser Apparatus 黃鈺鈞; Haung, Yu-Jun
    2019-08-22 光學鏡片之有限元素網格品質探討暨模仁全方位體積收縮補償法之研究;Investigation of finite element mesh quality and 3D volume shrinkage compensation method in core and cavity design for optical lenses 蔡嘉軒; Tsai, Chia-Hsuan
    2019-08-21 以電鍍法製備鈷鐵鎳合金三維微結構及其特性之研究;Fabrication of Three-Dimensional Co-Fe-Ni Alloying Micro-Features by Electroplating and their Characterization Guan-Xun; Wu
    2019-08-21 添加不同金屬顆粒對鎂鋅鈣 塊狀金屬玻璃複材熱性質及機械性質之研究;Study of Thermal and Mechanical Properties of Mg-based Bulk Metallic Glass Composite with Ex-situ Adding Different Metal Particles 蔣智偉; Chiang, Chih-Wei
    2019-08-21 微米尺寸銅鎳合金電阻材料之電鍍與特性研究;Electroplating and Characterization of the Micro Cu-Ni Alloys used in Electrical Resistor 羅元成; LUO, YUAN-CHENG
    2019-08-21 積層製造用高韌性鐵基金屬玻璃合金粉體之開發與製作;Development and fabrication of Fe-based metallic glass powder with high fracture toughness for additive manufacturing 張喬冠; Chang, Chiao-Kuan
    2019-08-20 均勻流場受力優化矩形質子交換膜燃料電池;Uniform flow field force Optimized rectangular Polymer electrolyte membrane fuel cell 翁莉芳; Weng, Li-Fang
    2019-08-20 空調壓縮機三點銲接之熱傳與應力分析;Thermal and Mechanical Analysis of Three-Point Welding in Air-Conditioning Compressor Assembly 羅元彰; Luo, Yuan-Zhang
    2019-08-19 不同cusp磁場比例與晶體坩堝旋轉條件對於柴氏生長5吋單晶矽之熱流場及氧雜質傳輸的影響;Effects of different unbalanced cusp-magnetic ratios and crucible rotation conditions on heat and oxygen transport during the Czochralski growth of 5-inch-diameter silicon crystal 林佑怡; Ida, Zumrotul
    2019-08-19 不同鍛造製程對AA6061、AA6066和AA6082 鋁合金機械性質與抗腐蝕能力的影響 林松達; Lin, Sung-Ta
    2019-08-19 水溶液法製備CsxPbyBrz鈣鈦礦系材料之研究;The Synthesized and Analysis of CsxPbyBrz Perovskites via Water-based Process 楊子萱; Yang, Tzu-Hsuan
    2019-08-19 耐高溫陶瓷砂芯的基礎研究 呂育儒; Lu, Yu-Ju
    2019-08-19 新型沸石FAM Z05與MOF之吸附性能研究 陳有志; Chen, You-Chih

    顯示項目501-550 / 4101. (共83頁)
    << < 6 7 8 9 10 11 12 13 14 15 > >>
    每頁顯示[10|25|50]項目

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明