中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:

Collection

	Electronic Thesis & Dissertation [2899/2899]
	journal & Dissertation [897/897]
	retired tests [328/328]
	Research Project [67/67]

Siblings

	Graduate Institute of opto-Mechatronics [514/514]
	Department of Chemical and Materials Engineering [978/978]
	National Central University Department of Chemical & Materials Engineering [2693/2693]
	International Environment Sustainable Development Program [96/96]
	Department of Civil Engineering [1147/1147]
	Graduate Institute of Civil Engineering [3335/3335]
	Interdisciplinary Program, College of Engineering [9/9]
	International Master Degree Program in Applied Materials Science(IAMS) [9/9]
	Institute of Materials Science and Engineering [666/666]
	Departmant of Mechanical Engineering [1791/1791]
	Graduate Institute of construction engineering [542/542]
	Graduate Institute of Environmental Engineering [1664/1664]
	Energy of Mechatronics [470/470]
	Executive Master of Civil Engineering [633/633]
	Executive Master of Mechanical Engineering [336/336]
	Executive Master of Construction Engineering and Management [174/174]
	Executive Master of Environmental Engineering [349/349]

Community Statistics

	Item counts issued in 3 years: 352(8.40%)
	Items With Fulltext: 4191(100.00%)
Download counts of the item
	Download times greater than 0: 4191(100.00%)
	Download times greater than 100: 3702(88.33%)
	Total Bitstream Download Counts: 2048891(5.04%)

Last Update: 2024-12-04 08:51

Top Upload

Top Download

Recent Submissions

	一種簡易旋轉式LED曝光裝置的設計與實作
	噴嘴外形對超音波輔助噴水效應之探討;Research on the E...
	磁場輔助電化學加工法於不銹鋼陣列微孔拋光之研究;Research on...
	微細片狀電極結合超音波輔助電化學放電加工於石英玻璃加工微槽之研究;In...
	陰離子交換膜水電解單元之傳輸現象分析;Analysis of tran...
	鎳鈦記憶合金電極應用於不鏽鋼彎管內表面電化學拋光之研究;Researc...
	混氣放電線切割加工 N-Type 單晶碳化矽之研究;Research ...
	液體輔助超短脈衝雷射薄石英晶圓微鑽孔研究;Research on Li...
	以超短脈衝雷射內部刻畫技術實現高品質裂面和高效石英晶圓切割探討;Exp...
	基於聚焦成形技術之藍寶石玻璃孔洞自動化量測系統開發;Developme...

Jump to a point in the index:
Or type in a year:

Ordering With Most Recent First

Show Oldest First

Showing items 401-425 of 4191. (168 Page(s) Totally)
<< < 12 13 14 15 16 17 18 19 20 21 > >>
View [10|25|50] records per page

Date	Title	Authors
2021-08-25	單螺桿壓縮機轉子對之幾何設計及加工方法之建立;Establishment of Design and Manufacture Methods on Rotor Pairs for Single-Screw Compressors	張銘哲; Zhang, Ming-Zhe
2021-08-24	應用旋風式銑削於螺旋式真空泵轉子加工之研究;A Study on Applying Whirl Milling Method to Manufacture Vacuum Pump Screw Rotors	曾禹銜; Tseng, Yu-Hsien
2021-08-19	深紫外發光二極體光熱特性模擬及優化之研究;Opticalthermal simulation and performance optimization of UVCLED	劉啟鑫; Liu, Qi-Xin
2021-08-18	不同鍍層之金屬多孔材對於質子交換膜燃料電池之抗腐蝕研究;Research on the corrosion resistant of metal foam with different coatings for Proton Exchange Membrane Fuel Cell	紀佳瑜; Ji, Jia-Yu
2021-08-18	低耗能智慧建築熱流場與能耗模擬分析;Thermal Flow Field and Energy Consumption Simulation Analysis for Low-Energy Smart Building	呂祐丞; Lu, You-Cheng
2021-08-18	使用Ni1-xCox-BCZY陽極提升以甲烷為燃料之質子傳導型固態氧化物燃料電池耐碳性;Carbon tolerant Ni1-xCox-BCZY anode for methane-fed proton conducting solid oxide fuel cell	林家銘; Lin, Chia-Ming
2021-08-18	脈衝複合偏壓電化學放電加工石英晶圓之研究;Research on Pulsed compound Bias Voltage Electrochemical Discharge Machining Quartz Wafer	劉柏億; Liu, Po-Yi
2021-08-16	以有限元素分析方法預估並量化振動應力消除之效果;Predicting and Quantifying the Effect of Vibration Stress Relief with Finite Element Analysis	金郁翔; Jin, Yu-Xiang
2021-08-16	以有限元素法分析石英振盪器的共振特性與激勵功率依賴性性質;Determining Resonance Characteristics and Drive Level Dependency of Quartz Oscillators via the Finite Element Method	黃醴萬; Huang, Li-Wan
2021-08-13	固態氧化物燃料電池金屬連接板與硬銲接合件潛變性質;Creep Properties for the Joint of Metallic Interconnect and Braze Sealant in Solid Oxide Fuel Cell	洪瑋佟; Hung, Wei-Tong
2021-08-13	雷射玻璃彎曲之熱傳與應力分析;Thermal and Stress Analysis in Laser Bending of Glass	陳姿秀; Chen, Zih-Siou
2021-08-12	基於多無線慣性感測器之步態分析與行走軌跡重建系統研究;Multiple Wireless IMUs Based Measurement System for Implementing Gait Analysis and Walking Route Reconstruction	蔡孟霖; Cai, Meng-Lin
2021-08-10	Design of an Augmented Clamping Instrument for Advanced Aneurysm Surgery	詹佩毓; Chan, Pei-Yu
2021-08-10	以物理實驗探討筒倉鳴音的現象	李庭瑋; Lee, Ting-Wei
2021-08-04	APCVD生長300mm矽晶圓過程中x流動之數值分析;Numerical analysis of the x-flow influence on the 300mm silicon wafer epitaxial growth during the APCVD process	黎寶福; Phuoc, Le Ba
2021-08-04	新世代輕量中熵合金之合金設計、微結構及其性質分析之研究;The study of alloy design, microstructure and properties characterization of novel lightweight Medium Entropy Alloys	廖俞欽; Liao, Yu-Chin
2021-08-03	300mm矽晶圓批量清洗之數值模擬分析;Numerical Analysis of 300mm Wafer Batch Cleaning	陳溥; Chen, Pu
2021-08-03	薄殼CAD模型之薄殼本體體積分解技術發展	周子耀; Chou, Tzu-Yao
2021-08-02	牙科矯正釘於不同植入參數之生物力學影響	吳柏頡; Wu, Po-Chieh
2021-08-02	薄殼件CAD模型自動化相似性比對技術發展	鍾尚恩; Chung, Shang-En
2021-07-29	熱處理對Inconel718選擇性雷射熔融工件微觀結構及機械性質之影響	游佳憲; Yu, Chia-Hsien
2021-07-29	整合MR影像與CT影像方位校準及C-arm影像輔助脊椎手術的路徑規劃與導引	陳宏融; Chen, Hung-Jung
2021-07-29	離岸風力機塔架之開機負載及失效評估分析	周聖勳; Chou, Sheng-Hsun
2021-07-28	高韌性鐵基金屬玻璃粉末之雷射積層製造與能量密度研究;Additive manufacturing of Fe-based metallic glass powder with high fracture toughness and energy density analysis	陳敬岳; Chen, Chin-Yueh
2021-07-26	以兩張二維X光影像重建三維心血管模型的研究	蔡欣芮; Tsai, Hsin-Jui