鄰近類別 研究計畫 [67/67] 期刊論文 [897/897] 考古題 [328/328] 類別統計 近3年內發表的文件: 291(9.44%) 含全文筆數: 3083(100.00%) 文件下載次數統計 下載大於0次: 3083(100.00%) 下載大於100次: 3015(97.79%) 檔案下載總次數: 2114495(75.97%) 最後更新時間: 2026-06-27 17:45 上傳排行 資料載入中..... 下載排行 資料載入中..... 最近上傳 Three-Dimensional Numerical Analysi... 應用實例分割與點雲配準於平面放置物件之機械手臂分揀系統開發;Devel... 階梯型式微流道蒸發冷板流動沸騰性能研究 渦卷式壓縮機轉子之精密電化學加工製程研究;Research on Pr... 旋轉工件式純鎢圓板電解減薄製程參數最佳 化與多物理場模擬分析;Opti... 矩形平板面內靜態與暫態變形之理論分析與實驗量測;Theoretical... 冷媒 R-1233zd(E) 與 R-245fa 於微多孔表面微流道蒸... 多風道空氣流動分佈均勻性改進研究 Implementation and Performance Eval... 錐形雙螺桿真空泵轉子之幾何設計與製造方法之開發;Development...

跳至: (選擇年份) 2026 2025 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1985 1980 1975 1970 1960 1950 (選擇月份) January February March April May June July August September October November December 或輸入年份:

由新到舊排序 由最舊的開始

顯示項目401-450 / 3083. (共62頁) << < 4 5 6 7 8 9 10 11 12 13 > >> 每頁顯示[10|25|50]項目

日期	題名	作者
2023-02-01	應用於鏡面材質瑕疵檢測之影像增強研究	張益誠; Chang, Yi-Cheng
2023-01-18	長焦光斑紅外飛秒雷射脈衝光之玻璃/玻璃焊接研究;Study on Glass/Glass Welding using Long Focal Spot NIR Femtosecond Laser Pulses	李承勳; Lee, Cheng-Hsun
2023-01-18	線鋸 4H-SiC 晶圓表面之雷射處理及其研磨特性研究;Characterization of Laser-processed and Subsequently Ground Surfaces of Wire-sawed 4H-SiC Wafer	蔡育林; Tsai, Yu-Lin
2023-01-16	全方位廢水循環系統無接觸AI洗車機器人;non	林志叡; Lin, Chih-Jui
2023-01-16	組織工程用擠出式積層製造技術之 轉角積料分析與控制;Control and Analysis of Over-accumulation in Corners for Extrusion Additive Manufacturing Technology in Tissue Engineering Application	陳麒九; Chen, Chi-Chiu
2023-01-12	使用 YOLOv4 網路與 LiDAR 相機之動態參考坐標系定位方法開發;A Positioning Method for Dynamic Reference Frame with YOLOv4 Network and LiDAR Camera	李冠輝; Li, Kuan-Hui
2023-01-10	以人工智慧方法建立雷射切割薄型矽鋼片之品質預測與最佳化模型;Artificial Intelligence-Based Methods for Predicting and Optimizing Cut Quality in Laser Cutting of Thin Electrical Steel Sheet	羅曼努; Rohman, Muhamad Nur
2023-01-03	顆粒形狀在簡單滑道與複雜滑道流動行為的影響研究	林驛軒; Lin, Yi-Xuan
2022-12-27	在焦磷酸鍍液中製備銅-鋅薄膜之平板電鍍法與製備合金微柱之微陽極導引電鍍法之比較;A comparison between the planar electrodeposition of Cu-Zn thin films and the micro anode-guided electroplating (MAGE) of Cu-Zn micropillars in the pyrophosphate	王俊堯; Wang, Chun-Yao
2022-12-27	層、紊流預混球狀火焰使用傳統和奈秒重覆脈衝之單/雙火花引燃比較;Comparisons of Single- and Dual-channel Sparks Using Conventional and Nanosecond Repetition Pulse Discharges for Laminar and Turbulent Premixed Spherical Flames	梅文勝; Tinh, Mai Van
2022-12-13	石墨烯場效應電晶體應用於鼻咽癌循環腫瘤細胞生醫感測晶片之研究;Study on nasopharyngeal carcinoma circular tumor cell biosensor based on graphene field effect transistor	李宗霖; Lee, Tsung-Lin
2022-12-02	於近化學計量條件之預混氨/空氣火焰最小引燃能量量測使用奈秒重覆脈衝放電;Measurements of Minimum Ignition Energy for Premixed Ammonia/Air Flames Near-Stoichiometry Condition Using Nanosecond Repetitively Pulsed Discharges	楊詠森; Yang, Yong-Sen
2022-12-02	高壓高紊流貧油預混甲烷混氫或混氨之球狀火焰速度量測及其一般通式;Measurements of Spherical Flame Speeds for Lean Premixed Methane Blending with Hydrogen or Ammonia under High-Pressure, High-Turbulence Conditions and Their General Correlations	龔泰宇; Gong, Tai-Yu
2022-11-22	外部致動之微流體機電控制平台;External actuated microfluidic electromechanical control platform	李柏衡; Lee, Po-Heng
2022-11-16	磁電式致動旋轉機械平衡儀計算/設計製作與驗證	高亦德; Kao, Yi-Te
2022-11-15	應用於智慧製造之網宇實體系統訓練資料異常檢知;Anomaly Detection of Training Data for Cyber-Physical System in Intelligent Manufacturing	黃鈺淳; Huang, Yu-Tsun
2022-11-08	基於深度遷移學習之滾珠螺桿差別運轉條件預壓監測研究	郭奕志; Guo, Yi-Zhi
2022-10-13	基於深度神經網路之雙足機器人系統建模;System Modeling of Biped Robot with Deep Neural Network	王士銘; Wang, Shih-Ming
2022-10-03	多軸系齒輪傳動系統分析;Analysis for multi-axes gear transmission system	胡登凱; Hu, Deng-Kai
2022-09-30	冷媒HFC-134a與HFC-245fa在板式熱交換器中之性能比較;Performance evaluation of Refrigerants HFC-134a and HFC-245fa in Plate Heat Exchangers	余沛萱; Yu, Pei-Shiuan
2022-09-29	1 kW兩相蒸發冷卻系統設計及性能驗證	林煜祥; Lin, Yu-Shiang
2022-09-29	電化學放電加工藍寶石極間現象觀察與加工技術研究;Observation of Gap Phenomena and Developement Processing Technology for ECDM of Sapphire	余紹華; Yu, Shao-Hua
2022-09-29	雙螺桿轉子對之泛用齒間間隙計算方法;A General Method on Inter-Lobe Clearance Evaluation for Twin-Screw Rotor Pairs	黃大祐; Huang, Da-You
2022-09-28	二階行星齒輪傳動機構效率分析	王晨曄; Wang, Chen-Ye
2022-09-28	以二維熱影像之溫度序列與深度學習預測生物支架線徑之研究;A Research on Predicting Line Width of Bio-Scaffold using Temperature Series on Thermal Imager and Deep Learning	薛廷威; Hsueh, Ting-Wei
2022-09-28	自動化工作站排程系統之設計與應用;Design of Scheduling System for Automation Workstations and its Applications	朱國睿; ZHU, GUO-RUI
2022-09-28	矩形平板施加點質量陣列的振動特性與暫態波傳分析與波源歷時反算應用;Vibration Characteristic and Transient Wave Propagation Analysis of Rectangular Plate Attached Mass Points and Application of Inverse Calculation of Impact History	林沛熹; Lin, Pei-Hsi
2022-09-28	矩形平板部分埋沒於顆粒體之動態反應與振動特性;Dynamic Response and Vibration Characteristics of a Rectangular Plate Partially Buried in Particles	洪聖凱; Hung, Sheng-Kai
2022-09-28	硫脲及其衍生物添加對微陽極導引電鍍法製備銅微柱之結構及特性影響研究;Influence of thiourea and its derivatives addition on the Structure and Properties of copper micropillars prepared by microanode guided electroplating	賴威全; LAI, WEI-QUAN
2022-09-28	漸擴雙通式微流道蒸發熱交換器性能研究	許正宏; Hsu, Cheng-Hung
2022-09-28	鋰離子電池模組之產熱模型建立與熱傳模擬分析;Modeling and Numerical Analysis of Heat Transfer in a Li-ion Battery Pack	鄭竣安; Cheng, Chun-An
2022-09-26	整合多層液態金屬線圈發電機之研製	張益誠; Zhang, Yi-Cheng
2022-09-23	精密鑄造中殼模厚度和保溫棉對縮孔影響的預測—以316L不銹鋼流量計之缺陷改善為例;Effect of shell mold thickness and insulating wool pattern on internal porosity in investment casting of vortex flow meter	曾瀚緯; Tseng, Han-Wei
2022-09-23	熱機處理對六元富鈦中熵合金之微結構與機械性質影響之研究;The effect of thermo-mechanical treatment on the microstructure and mechanical properties of hexamerous titanium-rich medium-entropy alloy	蔡翰林; Tsai, Han-Lin
2022-09-22	基於石墨烯改質膨脹型阻燃塗料和混能式微奈米發電機的分層可撓性自供電熱感測器;Highly Flexible and Self-Powered Thermal Sensor (FSTS) Based on Integrated Hierarchical Structure of Graphene-Modified Intumescent Flame Retardant (GIFR) Coating with Hybridized Nanogenerator	謝沁嬈; Shie, Chin-Yau
2022-09-22	電腦輔助平行軸減速齒輪箱之模組化設計與尺寸系列發展;Computer aided modular design and size range development for parallel reduction gearboxes	徐煜翔; Hsu, Yu-Shiang
2022-09-21	可檢測大電流之磁場感測器設計;DESIGN OF A CMOS-MEMS THREE-AXIS MAGNETIC SENSOR FOR DETECTING LARGE CURRENT	賴允文; Lai, Yun-Wen
2022-09-20	結合可撓性線圈之磁力計量測與分析	李宥霖; Li, Yu-Lin
2022-09-19	利用低損傷電漿改質於提升二硫化鉬電晶體之電傳輸特性;Using low-damaged plasma modification to improve the electrical transport properties of MoS2-based transistors	廖恩逸; Liao, En-Yi
2022-09-16	以微電鍍法製備鎳鉬合金微柱並探討其在1.0 M KOH溶液中電解產氫之性能;Fabrication of Ni-Mo Alloying micropillars by Micro-Anode Guided Electroplating and Their use in 1.0 M KOH to produce Hydrogen gas	程憲威; Cheng, Hsien-Wei
2022-09-07	超音波振動輔助啄鑽式藍寶石微孔加工之研究;A Study on Ultrasonic Vibration Assisted Micro-hole Pecking Drilling of Sapphire	邱品翰; Chiu, Pin-Han
2022-09-07	應用均勻實驗設計法優化倒傳遞網路之超參數以預測射出成型成品之比容;Optimizing BPNN hyperparameters via uniform design to predict specific volume of injection molded part	鄧修奇; Teng, Justin H.C.
2022-09-06	應用二階反應曲面法探討射出成型參數對於ABS試片之體積收縮率最佳化;Applying second order response surface methodology to optimize volumetric shrinkage of ABS specimen through injection molding parameters	林顥耘; Lin, Hao-Yun
2022-09-01	應用機器學習之堆疊模型於產品瑕疵分類之研究	王宏彬; Wang, Hong-Bin
2022-09-01	離岸風機基座裂縫的強度與疲勞分析;Strength and Fatigue Analysis of Cracks in the Foundation of an Offshore Wind Turbine	吳春昊; WU, CHUN-HAO
2022-08-31	使用深度學習及隨機森林預測地震之分析;Earthquake Prediction Using Deep Learning and Random Forest	羅正勛; LO, Cheng-Hsun
2022-08-31	兼具齒面拓樸修整及磨紋控制之創成磨齒技術開發;Technology Development of Generating Gear Grinding with Considering Both Topology Modification and Grinding Texture Control	楊昀承; Yang, Yun-Cheng
2022-08-31	高絕緣碳化矽於線放電切割加工之先期研究;Preliminary Study on High Insulation Silicon Carbide in Wire EDM	陳知昊; Chen, Chih-Hao
2022-08-30	M1.2微型擠壓絲攻製程參數之有限元素分析結果	王志先; Vuong, Chi-Tien
2022-08-30	不等長微型擠壓絲攻成型加工參數之實驗研究	黃彥程; Huang, Yen-Cheng

顯示項目401-450 / 3083. (共62頁) << < 4 5 6 7 8 9 10 11 12 13 > >> 每頁顯示[10|25|50]項目