English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 94274/94274 (100%)
造訪人次 : 82850579      線上人數 : 1572
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋

    子類別

    博碩士論文 [3083/3083]
    期刊論文 [897/897]
    考古題 [328/328]
    研究計畫 [67/67]

    社群統計


    近3年內發表的文件: 291(6.65%)
    含全文筆數: 4375(100.00%)

    文件下載次數統計
    下載大於0次: 4375(100.00%)
    下載大於100次: 4321(98.77%)
    檔案下載總次數: 2806422(4.92%)

    最後更新時間: 2026-07-22 18:22

    上傳排行

    資料載入中.....

    下載排行

    資料載入中.....

    RSS Feed RSS Feed
    跳至:
    或輸入年份:
    由新到舊排序 由最舊的開始

    顯示項目451-500 / 4375. (共88頁)
    << < 41 42 43 44 45 46 47 48 49 50 > >>
    每頁顯示[10|25|50]項目

    日期題名作者
    2022-08-30 以機器學習結合排液容器法量測液體密度與黏度 李漢祥; Li, Han-Xiang
    2022-08-30 放電複合超音波輔助電化學加工製備微圓柱形陣列電極之研究;A Study on Fabrication of Micro-Cylindrical Array Electrodes by Electrical Discharge Machining combined with Ultrasonic Assisted Electrochemical Machining 鄭安傑; Jheng, An-Jie
    2022-08-30 啄鑽式電化學放電加工藍寶石基板之研究;Sapphire Substrate Machining by Using Electrochemical Discharge Machining with Peck Drilling 蔡依婷; Tsai, Yi-Ting
    2022-08-30 硬脆材料複合加工與視覺影像定位系統之初步研究 陳崴淇; WeiChi, Chen
    2022-08-30 微型擠壓絲攻應用於316L不鏽鋼攻牙暨製程參數之實驗研究 許永翰; Hsu, Yung-Han
    2022-08-30 運用田口法於光纖收發器之散熱分析 陳彥瑋; Chen, Yan-Wei
    2022-08-30 擾動輔助EMD演算法在穿戴式嵌入式裝置中MCU的即時運算;Real-time computation of disturbance-assisted EMD algorithms in an MCU of wearable embedded system 林昱銓; LIN, Yu-Chuan
    2022-08-30 擾動輔助經驗模態分解之邊界效應的理論與數值分析;A Theoretical and Numerical Study on the Boundary Effects for Disturbance-Assisted EMD Algorithms 鄭詔合; Cheng, Shao-Ho
    2022-08-29 Design of a Spherical Reconfigurable Linkage for the Control of Mechanism Center of Rotation 王玟心; Wang, Wen-Hsin
    2022-08-29 以深度學習結合計算流體力學 量測液體密度、黏度與表面張力係數 蔡惟旭; Cai, Wei-Xu
    2022-08-29 以慣性感測器量化中風病患下肢運動能力暨功能分級之研究 韓紹禮; Han, Shao-Li
    2022-08-29 流體對可侵蝕傾斜床夾帶運移行為之研究 李育誠; Li, Yu-Cheng
    2022-08-29 移動式顆粒床過濾器應用於移除酸性氣體之研究 陳韋豪; Chen, Wei-Hao
    2022-08-26 有尾槳無人共軸直升機懸停系統;Hovering system of Unmanned coaxial helicopter with tail rotor 陳思俊; CHEN, SZU-CHUN
    2022-08-26 鎳鉬鋅合金微柱、微螺旋之製備及其在1M KOH中之產氫行為探討;Preparation of Ni-Mo-Zn Alloy micropillars and Microspirals and Investigation of Their Hydrogen Production Behavior in 1M KOH 黃楚雯; Huang, Chu-Wen
    2022-08-25 以卡爾曼濾波器達成之蛇型機器人狀態監測與行動策略;Snake Robot Motion Strategy with Kalman Filter 王韜; Wang, Tao
    2022-08-25 四軸飛行器搭配機器視覺進行燈泡卸載;Quadcopter With Machine Vision For Bulb Uninstall 沈時雨; Shen, Shih-Yu
    2022-08-25 於ROS架構下應用SLAM之導航機器人開發;Navigation Robot Development by Applying SLAM Based on ROS 蔡承祐; Tsai, Cheng-Yu
    2022-08-25 垂直振動片置入物對儲槽內顆粒排放行為之影 響;The effect of vibrated plate on the discharge behavior in a silo 張凱翔; Chang, Kai-Hsiang
    2022-08-25 雙源順序熱蒸鍍全無機混合鹵化物鈣鈦礦藍色發光二極體之研究;The Study of Dual-source Sequential Vacuum Deposition of Inorganic Mixed Halide Perovskite for Blue Light Emitting Diode 曲芸萱; CHU, YUN-HSUAN
    2022-08-24 人工智慧應用於玻璃瑕疵檢測;Application of Artificial Intelligence to Defect Detection in Glas 林楷裕; Lin, Kai-Yu
    2022-08-24 用於質子交換膜燃料電池之低成本與高性能鈦網氣體擴散層;Low-cost and high-performance titanium mesh gas diffusion layer for proton exchange membrane fuel cell 劉世杰; Liu, Shih-Jie
    2022-08-24 利用質子交換膜電解槽之現場產氫型加氫站複合系統分析;Analysis of Compound System of On-site Hydrogen Refueling Station Using Proton Exchange Membrane Electrolyzer 余雅各; Yu, Ya- Ke
    2022-08-24 質子交換膜燃料電池之微孔層凹槽結構與參數靈敏度模擬分析;Simulation Analysis of Microporous Layer Grooves Structure and Parameters Sensitivity of Proton Exchange Membrane Fuel Cell 陳佳煒; Chen, Chia-Wei
    2022-08-23 高壓輔助熱退火製程改善全無機鈣鈦礦太陽能電池之研究;The Study of Pressure-Assisted Annealing Process to Enhance All Inorganic Perovskite Solar Cell 林啟玄; LIN, CI-SYUAN
    2022-08-20 以微波輔助純水及有機溶劑進行熱塑型微流道封裝之製程;Microwave-assisted water/organic solvent bonding process of thermoplastic based microfluidics channel. 張昌晏; Chang, Chang-Yen
    2022-08-12 固態氧化物燃料電池金屬連接板與硬銲接合件熱機疲勞性質;Thermo-Mechanical Fatigue Properties for the Joint of Metallic Interconnect and Braze Sealant in Solid Oxide Fuel Cell 沈則方; Shen, Ze-Fang
    2022-08-11 Ni-W-Zn 三元合金微柱、微螺旋之製備 及其在1.0 M KOH(pH = 14)中之產氫行為探討;Ni-(26~46 at. %) W-Zn alloys fabricated by Micro-Anode Guided Electroplating (MAGE) and their production of hydrogen gas in 1.0 M KOH 黃勤; Huang, Chin
    2022-08-11 微量鋯、鈧與退火溫度對Al-5Mg-0.7Mn合金再結晶、敏化腐蝕性與機械性質的影響;Effect of Zr, Sc and annealing temperature on the recrystallization, sensitizied corrosion behavior and mechanical properties of Al Al-5Mg -0.7Mn alloy 劉育嘉; Liu, Yu-jia
    2022-08-10 不同鍛造製程對AA2014鋁合金機械性質與抗腐蝕能力的影響;Factors affecting the microstructure, tensile properties and corrosion resistance of AA2014 forgings 杜建興; Du, Jian-Xing
    2022-08-10 鋁合金板材殘留應力消除模擬研究;Simulation on Residual Stress Relief for Aluminum Alloy Plate 張鈞奕; Chang, Chun-Yi
    2022-08-08 不同鍛造製程對AA7005 鋁合金 微結構、織構與機械性質的影響 陳又維; Chen, Yu-Wei
    2022-08-03 快速升溫速率退火對Ti65(AlNbCrV)28Zr7中熵合金微結構及其機械性質影響之研究;Effect of rapid heating annealing on the microstructure and mechanical properties of Ti65(AlNbCrV)28Zr7 medium-entropy alloys 黃俊嘉; Huang, Chun-Chia
    2022-08-01 積層製造17-4 PH不鏽鋼之製程參數探討與高週疲勞性質研究;Study on the process parameters and high cycle fatigue properties of 17-4 PH stainless steel fabricated by additive manufacturing 蕭仲良; Hsiao, Chung-Liang
    2022-07-29 壓配合應力對於矯正釘植入齒槽骨之初期穩定度影響 郭釜瑜; KUO, FU-YU
    2022-07-29 離岸風力機塔架疲勞裂縫成長分析 黃宣凱; Huang, Hsuan-Kai
    2022-07-28 人工智慧應用於雷射切割矽鋼片之品質預測與閉迴路控制;Artificial Intelligent Based Approaches for Quality Prediction and Closed Loop Control in Laser Cutting of Electrical Steel Sheet 阮庭四; Nguyen, Dinh Tu
    2022-07-27 連續柴氏長晶過程中三坩堝熱傳與質傳的數值模擬;Numerical simulation of heat and mass transfer during continuous CZ crystal growth with triple crucible 黎俊賢; Li, Chun-Hsien
    2022-07-27 酸蝕刻清洗槽中晶圓表面平坦度之數值模擬;Numerical Simulation of Wafer Surface Flatness in Acid Etching Cleaning Tank 陳彥任; CHEN, YEN-JEN
    2022-07-26 方形侵入物形狀縱橫比對垂直振動顆粒床內分離現象之影響 吳家榮; Wu, Chia-Jung
    2022-07-25 柴氏法生長8吋矽單晶之V/G值與熱應力以及參雜物對缺陷影響之數值模擬 黃品皓; Huang, Pin-Hao
    2022-07-25 發展格點與元素間之交錯網格方法以消除多孔彈性力學之偽震盪問題 林宇晨; Lin, Yu-Chen
    2022-07-25 應用阻尼顆粒於馬達減速機進行轉子動平衡校正及結構振動抑制之實驗研究;An Experimental Study on Dynamic Balancing of Motor Rotor and Structural Vibration Attenuation for Motor Reducers with Damping Particles 柯妮佑; Ke, Ni-You
    2022-07-21 步進馬達伺服控制驅動器設計改良及校正;Design Improvement and Calibration of Stepper Motor Servo Control Driver 孔崇維; Kung, Chung-Wei
    2022-07-21 基於二維動態訊號分析技術之滾珠螺桿預壓失效監測暨診斷研究 蔡政良; Tsai, Cheng-Liang
    2022-07-21 邊緣運算用單板電腦及函式庫開發;Development of library and device for edge computing purpose 劉文浩; Liu, Wen-Hao
    2022-07-21 邊緣運算攝影機原型開發;Edge computing camera prototype development 林志陽; Lin, Zhih-Yang
    2022-07-20 以鑲刃式刀盤進行螺桿轉子成形銑削之解析數學模型建立與實驗驗證;Analytical modeling and experimental verification of the screw rotor milling utilizing the forming cutter with inserted blades 明智; Arifin, Achmad
    2022-07-20 自動化分解薄殼CAD模型殼本體之增強演算法發展 方聲翔; Fang, Sheng-Hsiang
    2022-07-19 B-rep模型凸起特徵辨識及分解技術發展 吳添瑜; Wu, Tien‑Yu

    顯示項目451-500 / 4375. (共88頁)
    << < 41 42 43 44 45 46 47 48 49 50 > >>
    每頁顯示[10|25|50]項目

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明